The Boyds’ Classic is a compilation of the design elements we have found to be the most elegant and user friendly examples of the classic style. The slender, somewhat open grip is well defined, but does not extend too far below the toe line. The comb is parallel to the bore, which aids in scope use, and because of its straight-line design, minimizes cheek slap under recoil. Additional facial support is provided by a graceful cheekpiece that blends perfectly with the overall shape of the buttstock. The forend is flat/oval in cross-section, and is proportioned to complement barrels of 22-26" in length.
It must be noted that due to the variations among models and tolerances that factories may or may not routinely adhere to, some minor fitting may be required even on our fully finished drop in parts to achieve that perfect fit to your action, although seldom, you must be willing to make these changes if necessary.
Please read through the READ PRIOR TO ORDERINGinformation to confirm the stock you are ordering is the correct one for your firearm.
NOTE: The Savage Models 11, 12 & 16 AND Stevens 200 Short Action have the same action as the Model 10; this Short Action measures 7 1/4" from Center to Center on the action screws or 4.275 from front trigger guard screw to front action screw. The Savage Models 111, 112 & 116 AND Stevens 200 Long Action have the same action as the Model 110; this Long Action measures 8" from Center to Center on the Trigger guard screws or 5.062 from front trigger guard screw to front action screw.
For Savage 10 and 110: Action screws used to manufacture Boyds’ stocks are for wood stocked firearms. These screws are longer than the screws used on plastic stocked firearms. New screws can be ordered directly from Savage.
IMPORTANT: WE DO NOT AT THIS TIME MAKE THE STOCK FOR THE 1ST GENERATION SHORT ACTION (1958-1987) 4.522" OR THE 3RD GENERATION CENTER FEED MAGAZINE SHORT ACTION (2005 AND UP) OR THE 3RD GENERATION LONG ACTION CENTER FEED MAGAZINE DESIGN.
THE EASIEST WAY TO TELL WHAT ACTION YOU HAVE IS TO DISASSEMBLE YOUR GUN. THE STOCKS WE BUILD ARE FOR ACTIONS THAT HAVE THE STEEL MAGAZINE-WELL ATTACHED TO THE RECEIVER. THE 3RD GENERATION CENTERFEED MAGAZINE WILL STAY IN THE STOCK .
If you have the new centerfeed design and do not know how to fit the action please contact us at customers@boydsgunstocks.com and let us know what you would like to see us build in the future.
