|
Ross Featherweight Thumbhole Replacement Stocks for Savage 10 and 110 Actions
The Ross FT's design is a synthesis of design elements requested by you the customer for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder thus minimizing muzzle jump and felt recoil. The forend is proportioned to complement barrels from 21 inches to 25 inches in length nicely and will accommodate barreled actions with Standard sporter contour barrels, and larger barrels up to a tapered varmint design can be inlet in these stocks.
The Ross FT's are available in a wide range of inlettings to accommodate most barreled actions.
It must be noted that due to the variations among models and tolerances that factories may or may not routinely adhere to, some minor fitting may be required, even on our fully finished drop in parts, to achieve that perfect fit to your action. Although seldom, you must be willing to make these changes if necessary.
Please read through the READ PRIOR TO ORDERING information to confirm the stock you are ordering is the correct one for your firearm.
NOTE: The Savage Models 11, 12 & 16 AND Stevens 200 Short Action have the same action as the Model 10; this Short Action measures 7 1/4" from Center to Center on the action screws or 4.275 from front trigger guard screw to front action screw. The Savage Models 111, 112 & 116 AND Stevens 200 Long Action have the same action as the Model 110; this Long Action measures 8" from Center to Center on the Trigger guard screws or 5.062 from front trigger guard screw to front action screw.
Action screws used to manufacture Boyds’ stocks are for wood stocked firearms. These screws are longer than the screws used on plastic stocked firearms.New screws can be ordered directly from savage.
IMPORTANT: WE DO NOT AT THIS TIME MAKE THE STOCK FOR THE 1ST GENERATION SHORT ACTION (1958-1987) 4.522" OR THE 3RD GENERATION CENTER FEED MAGAZINE SHORT ACTION (2005 AND UP) OR THE 3RD GENERATION LONG ACTION CENTER FEED MAGAZINE DESIGN.
THE EASIEST WAY TO TELL WHAT ACTION YOU HAVE IS TO DISASSEMBLE YOUR GUN. THE STOCKS WE BUILD ARE FOR ACTIONS THAT HAVE THE STEEL MAGAZINE-WELL ATTACHED TO THE RECEIVER. THE 3RD GENERATION CENTERFEED MAGAZINE WILL STAY IN THE STOCK .
If you have the new center-feed design and do not know how to fit the action please contact us at customers@boydsgunstocks.com and let us know what you would like to see us build in the future.
|
|
|
