The Sales Department hours are changing starting October 7th. The new hours will be 8am - 6pm CST Monday - Friday.

Accessories

:
92 products
  • BROWN CAMO DIP TARGET AT-ON...

    Brown Camo Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • PINK CAMO DIP TARGET AT-ONE...

    Pink Camo Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • GREY SKULLS DIP TARGET AT-O...

    Grey Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • GREY DIP TARGET AT-ONE COMP...

    Grey Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • LA ACF TAB

    Price: 

    $8.00
    View Details
  • EZ-INJECT® SYRINGE

    Easy-to-use 1.5 oz. syringe gives pin-point application in hard-to-reach areas and prevents over-application. These syringes have a long tip with an extra-wide opening at the bottom. Each syringe comes completely assembled with a top quality barrel, plunger, and oversized cap. Allows for easy cleanup or disposal when project is complete.

    Price: 

    $2.00
    View Details
  • AT ONE VERT ADJ BUTT EXT LOP

    This extended LOP butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

    Price: 

    $114.00
    View Details
  • AT ONE VERT ADJ BUTT STD

    This butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

    Price: 

    $108.00
    View Details
  • SA ACF TAB

    Price: 

    $8.00
    View Details
  • SAVAGE AXIS TRIGGER GUARD -...

    This metal replacement part is a factory original from Savage Arms. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal).

    Price: 

    $12.00
    View Details
  • ROTATING AT-ONE BUTT ASSEMBLY

    ROTATING AT-ONE BUTT ASSEMBLY Attaches to the existing butt plate of the At-one adjustable butt plate assembly. It will provide rotation on the recoil pad to allow the user to position the pad to fit their shooting style. To install: Remove the butt pad from the adjustable butt plate assembly, attach using the mounting screws and reattach the butt pad. Increases LOP by approximately 3/4" when installed. Will work in conjunction with the vertically adjustable assembly. Technical Specification: 5.7 degrees per rotation index, 40 degrees per side (right and left) with 80 degrees of full index range. Engraved index identifier marks. Aluminum housing, stainless dowel pins, black phosphate steel snap ring. Black anodized coating. The threaded knob is hard anodized and Teflon impregnated to prevent gulling of the threads. Operates without tools.

    Price: 

    $134.00
    View Details
  • PRO-BED 2000 BEDDING BROWN ...

    Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This kit is brown. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

    Price: 

    $14.95
    View Details
  • PRO-BED 2000 BEDDING BLACK ...

    Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This Kit is black. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

    Price: 

    $14.95
    View Details
  • At-One Bottom Cap with pica...

    Intended use is for attachment of a mono pod shooting stabalizer on the Boyds At-One Stock. It is a one to one modular component that will exchange with a standard bottom cap.Dimensionally the same as the standard bottom cap with a 3 slot section of picatinny rail built in. Designed so the rail section is parrallel to the bore. It is machined out of one piece aluminum with black anodization. Remove the standard bottom cap and install new bottom cap with rail section.

    Price: 

    $61.00
    View Details
  • LENGTH OF PULL EXTENDER AT-...

    Gun Metal Grey Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

    Price: 

    $35.00
    View Details
  • ADJ STD LOP GREY

    Gun Metal Grey Buttplate for At-One stocks. Approximately 12-1/2" to 14" Length of Pull. 1/2" thick over molded (rubber) recoil pad.

    Price: 

    $29.00
    View Details
  • Ruger American Long Action ...

    Metal Ruger American Trigger Guard with Mag Catch for Long Actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.

    Price: 

    $30.00
    View Details
92 products