Accessories

:
90 products
  • ACRAGLAS GEL® BEDDING KIT

    The Acraglas Gel Glass Bedding Kit by Brownells is the perfect bedding preparation for the shooter who wants the best possible accuracy from his gun at a minimum of cost, time and technical knowledge. It is a boon for the novice as well as the professional stock maker. When inletting a stock, you simply remove slightly more wood from the barrel and action; spread in butter-smooth, non-running Acraglas Gel; put in the metal (properly treated with Release Agent) and set aside for 24 hours. When gun is removed, the result is a perfectly accurized bedding job. •Complete, easy to follow instructions included. •UPC # 050806100022 ***DUE TO THE FLAMMABLE NATURE OF THIS PRODUCT, IT CANNOT BE EXPORTED. INTERNATIONAL ORDERS FOR THIS PRODUCT WILL NOT BE PROCESSED.***

    Price: 

    $30.00
    View Details
  • ADJ EXTND LOP GREY

    Gun Metal Grey Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

    Price: 

    $35.00
    View Details
  • ADJ STD LOP GREY

    Gun Metal Grey Buttplate for At-One stocks. Approximately 12-1/2" to 14" Length of Pull. 1/2" thick over molded (rubber) recoil pad.

    Price: 

    $29.00
    View Details
  • AT ONE VERT ADJ BUTT EXT LOP

    This extended LOP butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

    Price: 

    $87.00
    View Details
  • AT ONE VERT ADJ BUTT STD

    This butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

    Price: 

    $81.00
    View Details
  • At-One Bottom Cap with pica...

    Intended use is for attachment of a mono pod shooting stabalizer on the Boyds At-One Stock. It is a one to one modular component that will exchange with a standard bottom cap.Dimensionally the same as the standard bottom cap with a 3 slot section of picatinny rail built in. Designed so the rail section is parrallel to the bore. It is machined out of one piece aluminum with black anodization. Remove the standard bottom cap and install new bottom cap with rail section.

    Price: 

    $61.00
    View Details
  • AT-ONE EXTENDED BUTTPLATE A...

    Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

    Price: 

    $32.00
    View Details
  • AT-ONE KICK-EEZ 1" PAD

    1 Inch recoil pad - Delivers much needed recoil reduction and is available in the popular At-One shape. ***These pads do not require final sanding. These are pre-fit pads.***

    Price: 

    $22.00
    View Details
  • AT-ONE TARGET FOREARM - OVE...

    Beaver-style; flat design forend. Width 2" at rear to 1-13/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

    Price: 

    $22.00
    View Details
  • AT-ONE TARGET GRIPS - OVERMOLD

    Thicker, more vertical grip designed for prone shooting. Over molded components are a plastic substrate with over molded panels of rubber.

    Price: 

    $17.00
    View Details
  • AT-ONE TARGET GRIPS - PLASTIC

    Thicker, more vertical grip designed for prone shooting. Plastic substrate – Super Tough, Impact Modified, Heat Stabilized Nylon

    Price: 

    $15.00
    View Details
  • AT-ONE TRADITIONAL FOREARM ...

    Sleek and slender standard forend. Width 1-3/4" at rear to 1-7/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

    Price: 

    $22.00
    View Details
  • AT-ONE TRADITIONAL GRIPS - ...

    Swept back pistol grip design. Over molded components are a plastic substrate with over molded panels of rubber.

    Price: 

    $17.00
    View Details
  • BIRCHWOOD CASEY® TRU-OIL® F...

    This complete stock finish kit gives you everything you need to finish a new stock or to refinish an old one. TRU-OIL® Gun Stock Finish brings out the richness and beauty of fine woods and gives you a tough, long lasting finish. And, it's easy to use. This kit contains a generous supply of professional-grade finishing materials and a complete instruction guide for use. •Watch our "How To Sand and Finish" YouTube video •UPC # 029057238013 ***DUE TO THE FLAMMABLE NATURE OF THIS PRODUCT, IT CANNOT BE EXPORTED. INTERNATIONAL ORDERS FOR THIS PRODUCT WILL NOT BE PROCESSED.***

    Price: 

    $15.00
    View Details
  • BLUE DIP TARGET AT-ONE COMP...

    Blue Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • BLUE DIP TRADITIONAL AT-ONE...

    Blue Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $53.00
    View Details
  • BLUE SKULLS DIP TARGET AT-O...

    Blue Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap.

    Price: 

    $57.00
    View Details
  • BOYDS®RECOIL PAD

    Boyds Leather Look Recoil Pad - 1/2". Delivers much needed recoil reduction and is available in the popular classic shape. ***These pads require final sanding/fitting to your Boyds' stock. These are not pre-fit pads.***

    Price: 

    $7.50
    View Details
90 products