Accessories

Easy-to-use 1.5 oz. syringe gives pin-point application in hard-to-reach areas and prevents over-application. These syringes have a long tip with an extra-wide opening at the bottom. Each syringe comes completely assembled with a top quality barrel, plunger, and oversized cap. Allows for easy cleanup or disposal when project is complete.

These screws are required for most plastic to wood stock conversions. This screw set is to be used for any Stevens 200 or Savage black or blued model 10, 11, 12, 14, 16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

6 Piece Blued Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

Remington 870 stock bolt measures ¼" x 28 TPI 8" OAL. required for most synthetic to wood stock replacements. Compatible with Field Design and American Plainsman Remington 870 Buttstocks only. Not compatible with Sterling Thumbhole design.

6 Piece Nickel Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

These screws are required for most plastic to wood stock conversions. These are Nickel screws. This screw set is to be used for any Savage Stainless model 10, 11, 12, 14,16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

Boyds Leather Look Recoil Pad - 1/2". Delivers much needed recoil reduction and is available in the popular classic shape. ***These pads require final sanding/fitting to your Boyds' stock. These are not pre-fit pads.***

Quick release rifle sling swivel - 1 1/4 inch. To attach sling swivel, unscrew locking screw, press in the locking screw, when the locking lever clears the retaining pin, move the locking lever out of the way, keeping the locking screw pressed in. Attach the swivel and return the locking lever over the retaining pin and release the locking screw. Tighten the locking screw to secure the swivel to the rifle swivel base. Stainless Steel; blued finish

This Quick Detach Sling Swivel features a 1.25" Loop for compatibility with a wide variety of sling types and is quickly and easily installed or removed from our At-One QD Sling Socket via its large push button. The QDS swivel is constructed of Stainless Steel for strength and durability, blued finish and is a 100% US Made product.

Compatible with the At-One and At-One Thumbole gunstocks only. Constructed of heavy duty polymer, 9 slot rail allows for the attachment of various Picatinny rail-mounted accessories such as lights, vertical grips, etc. •UPC # 873750005102

This 1/2" Kick-eez brand recoil pad fits At-One™ series, Agility™, Spike Camp™, and Quest gunstocks.

Thicker, more vertical grip designed for prone shooting. Plastic substrate – Super Tough, Impact Modified, Heat Stabilized Nylon. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This Kit is black. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This kit is brown. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

Thicker, more vertical grip designed for prone shooting. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Swept back pistol grip design. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Machined aluminum anodized black trigger guard for REMINGTON 770 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks. Hole spacing is 2 7/8".

Machined aluminum anodized black trigger guard for REMINGTON 710 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for GLENFIELD 25 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for Marlin 25 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for WINCHESTER 72 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for Savage B-Mag models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Replacement trigger guard for Mossberg 100 ATR short and long action rifles.

This 1" Limbsaver Pad provides up to a 70% felt recoil reduction for a comfortable, flinch-free shooting experience. This is a grind-to-fit recoil pad.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

Sleek and slender standard forend. Width 1-3/4" at rear to 1-7/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Beaver-style; flat design forend. Width 2" at rear to 1-13/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

This butt pad is easily installed onto the At-One™, Agility™, Spike Camp™, and Quest gunstocks using a 1/8" Allen Wrench. If you are installing this 1" butt pad on a Spike Camp™ gunstock, you will need to use the screws from your Boyds gunstock's 1/2" pad, not the supplied screws with this 1" butt pad accessory. They will be too short.

CNC machined, aluminum with black anodization Thompson/Center Venture Trigger Guard.

This is a metal replacement trigger guard for Marlin rimfire models. Compatible models include: 900 Series, 917, 925, 980, XT Series, XT-17, XT-22, & XT 22 Mag.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This is a metal replacement trigger guard for Marlin centerfire models. Compatible models include: X7, X7c, X7s, X7vh, Xy7, Xl7, Xs7, Xs7vh.