Accessories

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows Ruger American rifles to use of the Ruger Mini 30 magazines for the 7.62x39 caliber when they are assembled to a Boyds stock. ATTENTION CUSTOMERS: Critical to start both screws before tightening to final torque (30 in LBS). Learn more about this kit here: Ruger American 7.62x39 Mini 30 Magazine Kit

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows other Ruger American rifles to be converted to allow the use of the Ruger AI-Style magazines with compatible calibers when they are assembled to a Boyds stock. Not compatible with 7.62x39 calibers. See compatible calibers here: Ruger American Magazine Styles

Intended use for attachment with mono pod shooting stabilizer on the Boyds At-One Gunstock. One-to-one modular component will exchange with a standard bottom cap. Dimensionally the same as the standard bottom cap with a 3-slot section Picatinny rail built in. The rail section is designed to be parallel to the bore. CNC machined aluminum with black anodization. Remove standard bottom cap and install new bottom cap with Picatinny rail section.

This buttpad is easily installed on to the At-One and Spike Camp stocks using an Allen Wrench, 1/8th. If you are installing this 1" buttpad on a Spike Camp stock, you will need to use the screws from your 1/2" buttpad, not the supplied screws with the 1" buttpad, they will be too short.

This 1/2" Kick-Eez Recoil Pad fits At-One series, Agility, and Spike Camp stocks.

Beaver-style; flat design forend. Width 2" at rear to 1-13/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Sleek and slender standard forend. Width 1-3/4" at rear to 1-7/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Gun Metal Grey Extended buttplate for At-One series and Agility stocks. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Gun Metal Grey Buttplate for At-One series and Agility stocks. Approximately 12-1/2" to 14" Length of Pull. 1/2" thick over molded (rubber) recoil pad.

This extended LOP butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

This butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

ROTATING AT-ONE & AGILITY BUTT ASSEMBLY Attaches to the existing butt plate of the At-One and Agility adjustable butt plate assembly. It will provide rotation on the recoil pad to allow the user to position the pad to fit their shooting style. To install: Remove the butt pad from the adjustable butt plate assembly, attach using the mounting screws and reattach the butt pad. Increases LOP by approximately 3/4" when installed. Will work in conjunction with the vertically adjustable assembly. Technical Specification: 5.7 degrees per rotation index, 40 degrees per side (right and left) with 80 degrees of full index range. Engraved index identifier marks. Aluminum housing, stainless dowel pins, black phosphate steel snap ring. Black anodized coating. The threaded knob is hard anodized and Teflon impregnated to prevent gulling of the threads. Operates without tools.

Thicker, more vertical grip designed for prone shooting. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Thicker, more vertical grip designed for prone shooting. Plastic substrate – Super Tough, Impact Modified, Heat Stabilized Nylon. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Swept back pistol grip design. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

This Quick Detach Sling Swivel features a 1.25" Loop for compatibility with a wide variety of sling types and is quickly and easily installed or removed from our At-One QD Sling Socket via its large push button. The QDS swivel is constructed of Stainless Steel for strength and durability, blued finish and is a 100% US Made product.

Blue Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Blue Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap.

Grey Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Red Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Red Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Red Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Brown Camo Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Pink Camo Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Pink Camo Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

This kit is compatible with short action caliber Mossberg Patriot models with AICS platforms and can be used to convert a rotary detachable magazine to an AI Magazine. Not compatible with 350 Legend and 450 Bushmaster calibers due to cartridge design. This kit is not compatible with factory stocks, must have a Boyds Hardwood Gunstock in order to convert to the AI Magazine.

Machined black anodized Tikka T3 Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3, T3x, & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

Machined black anodized Tikka T3 Lite Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3 & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

The Rail Sling Attachment provides a forward sling attachment point for the Magpul MS3 and other clip-in sling systems. •Solid Steel construction •Milspec manganese phosphate finish •Compatible with 1913 Picatinny rails •UPC # 873750005249

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Our Rights" T-shirt Design in Black with white 1776 graphic and "Shall Not Be Infringed" quote on front. Boyds red logo on front. Boyds red B and #BetterwBoyds on the back. White Boyds logo and South Dakota, USA on back.