Gunstocks

VARMINT THUMBHOLE, PARKER HALE MAUSER 1200, #1 BARREL CHANNEL Barrel Dimensions: Point A = 1 3/8" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16"Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:This stock is designed to accept #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE, REMINGTON 7, SHORT ACTION, LH STOCK, RH ACTION, MAG BARREL CHANNEL Barrel Dimensions: Point A = 1 5/16" and Point B = 13/16" Center to Center of Action Screws: 5 15/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Designed for the hinged floor plate Remington Model 7 with Magnum barrel contour. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

RANGER® 400, 16 GA, BEAVERTAIL FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 7/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

PRO VARMINT PARKER HALE MAUSER 1200, #1 BARREL CHANNEL Barrel Dimensions: Point A = 1 3/8" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16"Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:This stock is designed to accept #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

RIMFIRE HUNTER, MARLIN® 60 SS, FACTORY BARREL CHANNEL, STOCK, ZZ Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 30 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

MARLIN® 444SS, CAP STYLE FOREND, ZZ Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: .9"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 0.75"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 9.585"Over All Length of Part: 9.895"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE, MARLIN X7C, LONG ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock is designed for the X7 Long Action receiver. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BARRACUDA MARLIN® 60 SN, FBC Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 28 1/4 w/pad" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM, MOSIN NAGANT M-44, LH STOCK, RH ACTION, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are Sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. Our stocks are designed for the straight bolt. With fitting experience, they can be inlet for any bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC, MOSSBERG MVP, LH STOCK, RH ACTION, DETACHABLE BOX MAGAZINE, SHORT ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1" and Point B = 45/64" Center to Center of Action Screws: 4 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your magazine liner, trigger guard with screw, takedown bolts, and take down bolt head washer. ATTENTION: Not compatible with LR Tactical with AR-Style Magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

OTASCO 60 PISTOL GRIP STOCK Top Tang width 15/16" Top Tang length 3" Bottom Tang width 15/16" Bottom Tang length 4 15/16" Stock height at receiver 2 3/16" Stock width at receiver 1 7/16THS" Total Length of stock 16"

MARLIN 39A, CAP STYLE FOREND, ZZ Barrel Channel Point at Rear: .878"Barrel Channel Point at Front: .800"Receiver Edge to Center of Mounting Screw: n/aMagazine Tube Width: .45"Center to Center of Mounting Screws: n/aMagazine Tube Shoulder to Shoulder: n/aOver All Length of Part: 9.92"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:YOu will need endcap and endcap screws.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC, MARLIN® X7C, LONG ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock is designed for the X7 Long Action receiver. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

SS EVOLUTION® MARLIN® 60 SN, ANY BARREL CHANNEL, ZZ, FINISHED Barrel Dimensions: Point A = 13/16" and Point B = N/A Center to Center of Action Screws: N/A Over All Length of Part: 27" w/pad Width of Trigger Guard Cut Out: 7/8" Length of Trigger Guard Cut Out: 4 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 Tube Feed with the u-shaped trigger guard (see inletting photots). Early model trigger guards are longer and are shaped differently. DIP Products sells the new u-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM, MOSIN NAGANT M-44, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are Sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. Our stocks are designed for the straight bolt. With fitting experience, they can be inlet for any bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

ITHACA® 37, 12 GA, FOREND, ZZ Barrel Channel Point at Rear: 1.02"Barrel Channel Point at Front: 0.57"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.08"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 5.91"Over All Length of Part: 7.965"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the forend cap from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

OTASCO 30 CAP STYLE FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 15/16"Barrel Channel Point B: 13/16"Magazine Tube Width: 3/4"Magazine Tube Shoulder to Shoulder: 9 1/4"Over All Length of Part: 9 9/16"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS:There are a few variations of Cap style forends that were made for this model. Please confirm dimensions prior to ordering.

MARLIN 39A ,.22 STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: .535" Top Tang Length: 3.1" Bottom Tang Width: .525" Bottom Tang Length: 3.1" Stock Height at Receiver: 1.575" Stock Width at Receiver: 1.25" Overall Length of Stock: 12.9" Measurement of Receiver Mounting Bolt: .215" X1.68" BUTTPLATE ATTENTION CUSTOMERS:You will need the take down screw from the original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

Classic, Mossberg MVP, Detachable Box Magazine, Short Action, Factory Barrel Channel Barrel Dimensions: Point A = 1" and Point B = 45/64" Center to Center of Action Screws: 4 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your magazine liner, trigger guard with screw, takedown bolts, and take down bolt head washer. ATTENTION: Not compatible with LR Tactical with AR-Style Magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC, MARLIN X7C, LONG ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock is designed for the X7 Long Action receiver. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

RIMFIRE VARMIT THUMBHOLE, MARLIN® 60 SN, FACTORY BARREL CHANNEL, STOCK, ZZ, FINISHED Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 30 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60 needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRO VARMINT, MOSIN NAGANT M-44, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

OTASCO 30 BARREL BAND FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 1"Barrel Channel Point B: 3/4"Magazine Tube Width: 21/32"Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A"Shoulder to Shoulder for Barrel Band: 9 3/16"Over All Length of Part: 11 1/16"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied.

MARSHWOOD DRAWBOLT, .410GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 2 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 2 5/8" Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 9/16" BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: Please see Stevens 311 series stocks for possible crossover parts if your tang dimensions are not matching the supplied dimensions above.

JC PENNY® 3040, STRAIGHT GRIP STOCK, ZZ Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

Pro Varmint Mossberg 702 Plinkster, Clip Feed, Factory Barrel Channel Barrel Dimensions: Point A = 45/64" and Point B = 21/32" Center to Center of Action Screws: 6 55/64" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need the takedown screws from your gun. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

ITHACA® 37, 12 GA ,RIBBED FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/8 " Magazine Tube Shoulder to Shoulder: 2 9/16 " Over All Length of Part: 6 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

RH, MARLIN® 60 SN, FACTORY BARREL CHANNEL, STOCK, ZZ Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 30 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER, MOSIN NAGANT M-44, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AT-ONE, MARLIN X7C, SHORT ACTION, FACTORY BARREL CHANNEL, ZZ F Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock designed for the Marlin X7 Short Action with factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

LONG TOM, .410 GA, SPRING CLIP SINGLE FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/32" Barrel Channel Point B: 11/16" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A Over All Length of Part: 9" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: No mounting hardware is included. This forend is for internal mounted springclip. Variations of mounting hardware exist, fitting of your hardware may be needed.

OTASCO 30 STRAIGHT GRIP STOCK Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AT-ONE, HOWA 1500 MINI, DETACHABLE BOX MAGAZINE, HEAVY #6 BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1.095" and Point B = .783" Center to Center of Action Screws: 6.785" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

MARSHWOOD DRAWBOLT SPLINTER FOREND, .410GA, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Receiver Edge to Center of Mounting Screw: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A " Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:These forends are designed to accept Internal spring clip hardware. Do to variations for this model final fitting of hardware and the drilling for mounting screws may be required.

Rimfire Varmint Thumbhole, Mossberg 702 Plinkster, Clip Feed, Factory Barrel Channel Barrel Dimensions: Point A = 45/64" and Point B = 21/32" Center to Center of Action Screws: 6 55/64" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need the takedown screws from your gun. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BARRACUDA MARLIN® 60 S-CF, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 28 1/4" w/pad Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

JC PENNY® 2935, STRAIGHT GRIP STOCK, ZZ Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

ITHACA® 37 STK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 5/8" Stock Height at Receiver: 2 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 13/16" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate Most 12ga, 16ga, and 20 GAUGE Ithaca 37 actions will work with this stock. THIS STOCK WILL REQUIRE FITTING FOR THE FEATHERWEIGHT FRAMED MODEL 37. PLEASE COMPARE MEASUREMENTS SUPPLIED WITH THOSE OF YOUR FIREARM.

PLATINUM, MARLIN® X7C, SHORT ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock designed for the Marlin X7 Short Action with factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE, MOSIN NAGANT M-44, LH STOCK, RH ACTION, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are Sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. Our stocks are designed for the straight bolt. With fitting experience, they can be inlet for any bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

OTASCO 30 PISTOL GRIP STOCK Length of Pull 13 3/4"Top Tang width 1/2"Top Tang length 3 1/16"BottomTang width 9/16"BottomTang length 3 1/8 "Stock height at receiver 1 3/4 "Stock width at receiver 1 1/2 "

HERT HOWA 1500 MINI, DETACHABLE BOX MAGAZINE, LH STOCK, RH ACTION, HEAVY #6 BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1.095" and Point B = .783" Center to Center of Action Screws: 6.785" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

LONG TOM, .410 GA, TAKEDOWN SINGLE FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/16 " Barrel Channel Point B: 11/16 " Receiver Edge to Center of Mounting Screw: 3 3/4 " Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 9 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: If you do not have spring clip model forend please see the savage 94 takedown or Stevens model 85 for possible compatible parts.

HERITAGE, MOSSBERG 4x4, DETACHABLE BOX MAGAZINE, SHORT ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 11/64" and Point B = 23/32" Center to Center of Action Screws: 4 23/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety and Bolt Release are on the side of the receiver. ATTENTION CUSTOMERS: BOYDS STOCK WILL ONLY WORK FOR THE PLASTIC/SYNTHETIC TO WOOD CONVERSION. You will need to use the plastic mag liner from the original factory stock and the front action screw (.930"). Each stock will be supplied with the rear action screw (1.5"), "FLAT FRONT" trigger guard, and wood screw (1"). It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

MARLIN® 1895, LEVER ACTION, BUTTSTOCK, ZZ Top Tang Width: 0.75"Top Tang Length: 3.10"Bottom Tang Width: 0.56"Bottom Tang Length: 3.10"Stock Height at Receiver: 3.64"Stock Width at Receiver: 1.300"Overall Length of Stock: aprox. 13.25"Measurement of Receiver Mounting Bolt: N/ABUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

INTERSTATE ARMS 97, 16 GA STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw: 1 1/2" Magazine Tube Shoulder to Shoulder: 6 1/8" Over All Length of Part: 6 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

MARSHWOOD DRAWBOLT, 16GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 2 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 2 5/8" Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 9/16" BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: Please see Stevens 311 series stocks for possible crossover parts if your tang dimensions are not matching the supplied dimensions above.

HERITAGE, MARLIN X7C, SHORT ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 7" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Stock designed for the Marlin X7 Short Action with factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE, MOSIN NAGANT M-44, MILITARY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are Sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. Our stocks are designed for the straight bolt. With fitting experience, they can be inlet for any bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

SS EVOLUTION® MARLIN® 60 S-CF, ANY, FACTORY BARREL CHANNEL, ZZ, FINISHED Barrel Dimensions: Point A = 13/16" and Point B = N/A Center to Center of Action Screws: N/A Over All Length of Part: 27" w/pad Width of Trigger Guard Cut Out: 7/8" Length of Trigger Guard Cut Out: 4 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 Tube Feed with the u-shaped trigger guard (see inletting photots). Early model trigger guards are longer and are shaped differently. DIP Products sells the new u-shaped trigger guards for the Model 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.