Gunstocks

FOX® B 20 GA SEMI BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CENTRAL ARMS, DBL DRAWBOLT .410 GA SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Receiver Edge to Center of Mounting Screw: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A " Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:These forends are designed to accept Internal spring clip hardware. Do to variations for this model final fitting of hardware and the drilling for mounting screws may be required.

FEATHERWEIGHT THUMBHOLE, ENFIELD® P-17, FLAT FLOOR PLATE, #1 BARREL CHANNEL, ZZ, FINISHED Barrel dimensions: Point A = 1.315” Point B = .745” Center to Center Action Screws: 7.965” Enfield P-17’s with flat floor plates are a custom build that have had the original “stepped” floor plate and magazine box modified to a flat configuration, and generally have been rebarreled with a “sporter” barrel contour. Please review barrel dimensions and be aware that fitting or altering the floor plate and barrel channel in let may be required for your firearm.

Rear Receiver Height 1.68 Front Receiver Height 1.4 Rail Thickness for Receiver 1.6 What is the RECEIVER? - The receiver is what holds the mechanical parts of the firearm. This stock has the BOYDS' SS Evolution??? shape; however, the inletting and final sanding and finish has been LEFT up to the customer for their desired action. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

C.I.L. 621, 12 GA RIBBED FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/8 Magazine Tube Shoulder to Shoulder: 4 1/2 Over All Length of Part: 6 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BROWNING® GOLD HUNTER, 20 GA FOREND, ZZ Barrel Channel Point at Rear: 1.258"Barrel Channel Point at Front: 0.847"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.325"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 9.903"Over All Length of Part: 11.717"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine tube cap from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER BRNO MAUSER VZ-24 #1 BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AMERICAN PLAINSMAN COAST TO COAST 660 12 GA BANTAM FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 Magazine Tube Shoulder to Shoulder: 5 3/4 Over All Length of Part: 9 1/4 ATTENTION CUSTOMERS: On your action slide tube, measure from top of threads to bottom of collar that holds the action bars. This measurement is critical! This forend is for the 6 1/2" action slide. If your action slide measures 7 5/8", see our American Plainsman Forend Shape! NOTE: Since 2006, some newer models shotguns with synthetic forearms may not use an action slide tube at all; rather, the pump handle will have two integral bars pinned into the handle itself. If you have one of these, you cannot use a forearm that was designed to go over an action slide tube without first buying the correct length tube and action slide tube nut. You may contact Havlin Sales at 636-937-6401 to obtain proper components. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE DICKSON GOLDEN BEAR, SHORT ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 1/4" and Point B = 13/16" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:This stock is designed for the DICKSON GOLDEN BEAR Short Action, with factory tapered barrel channel. Numerous other models have been manufactured using this action design.

H & R® 1915, .410 GA FOREND, ZZ Barrel Channel Point at Rear: 0.855"Barrel Channel Point at Front: 0.73"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 8.585"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

CLASSIC BROWNING A-BOLT MICRO SHORT ACTION FACTORY BARREL CHANNEL ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 11/64" and Point B = 43/64"Center to Center of Action Screws: 7 13/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS: Before you order, you must confirm, by serial number, if your firearm model is an A-Bolt, A-Bolt II (2), or A-Bolt III (3). The roll stampings on all versions only states A-Bolt, regardless of model. Also, you will need to confirm if your particular firearm is a Micro version or not. Micro versions are different than the standard models. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FOX® MODEL B-E, TYPE 1, 20GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/8" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT BRNO ZKK-601 LH STOCK RH ACTION FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CRESENT SINGLE STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: 5/8 Top Tang length: 2 Bottom Tang width: 5/8" Bottom Tang length: 2" Stock height at receiver: 1 11/16" Stock width at receiver: 1 7/16" Overall Length of Stock: 12 1/2" Measurement of Receiver Mounting Bolt: 4 3/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

STERLING H&R® TRACKER, 20 GA STOCK, ZZ Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models.

CZ 527 VARMINT, AT-ONE, SHORT ACTION, DETACHABLE BOX MAGAZINE, BULL BARREL CHANNEL Barrel Dimensions: Point A = .990" and Point B = .890" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AP BROWNING® BPS 20 GA FOREND ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: 1 13/32" Magazine Tube Shoulder to Shoulder: 4 3/16 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS: Early BPS actions will not work with these parts.

FOX® B 20 GA BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 7/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

FOX® SERIES F, 16 GA, SEMI BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CENTRAL ARMS, DBL DRAWBOLT 16 GA SPLINTER FOREND ,ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

VARMINT THUMBHOLE, CZ® 527 AMERICAN, SHORT ACTION, CLIP FEED, LH ACTION,BULL BARREL CHANNEL, ZZ p>Barrel Dimensions: Point A = 0.99" and Point B = 0.885"Center to Center of Action Screws: 5.5" Over All Length of Part: 31.25"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect=.

CLASSIC, ENFIELD® P-17, FLAT FLOOR PLATE, LEFT HAND STOCK, RIGHT HAND ACTION, #1, BARREL CHANNEL Barrel dimensions: Point A = 1.315” Point B = .745” Center to Center Action Screws: 7.965” Enfield P-17’s with flat floor plates are a custom build that have had the original “stepped” floor plate and magazine box modified to a flat configuration, and generally have been rebarreled with a “sporter” barrel contour. Please review barrel dimensions and be aware that fitting or altering the floor plate and barrel channel in let may be required for your firearm.

Rear Receiver Height 2.5 Front Receiver Height 2.125 Receiver Width1.8Rear Forend Width 1.75Front Forend Width 1.625 Forend Width at the Front 1.65 What is the RECEIVER? - The receiver is what holds the mechanical parts of the firearm. This stock has the BOYDS' Varmint Thumbhole shape; however, the inletting and final sanding and finish has been LEFT up to the customer for their desired action. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHER WEIGHT BRNO® MAUSER® VZ-24 #1 BARREL CHANNEL LH STOCK RH ACTION ZZ Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Length of Floor Plate 8 11/16" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour Barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

C.I.L. 621, (TRIGGER GUARD SAFETY) 12 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: N/A Top Tang length: N/A Bottom Tang width: 5/8" Bottom Tang length: 1 3/8" Stock height at receiver: 2" Stock width at receiver: 1 5/16" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® 1915, ROUND TANG, .410 GA STOCK, ZZ Top Tang Width: 0.435"Top Tang Length: 1.530"Bottom Tang Width: 0.435"Bottom Tang Length: 1.675"Stock Height at Receiver: 1.270"Stock Width at Receiver: 1.000"Overall Length of Stock:12.600"Measurement of Receiver Mounting Bolt: 9.75"BUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the takedown bolt and washer from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

STERLING LH COAST TO COAST 660 12 GA STOCK, ZZ Stock comes with mounting bolt. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 3/8" Stock Height at Receiver: 1 13/16" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC DICKSON GOLDEN BEAR, SHORT ACTION, LEFT HAND STOCK RIGHT HAND ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 1/4" and Point B = 13/16" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:This stock is designed for the DICKSON GOLDEN BEAR Short Action, with factory tapered barrel channel. Numerous other models have been manufactured using this action design.

FOX® B-E, 20 GA, SPLINTER, FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

BROWNING T-BOLT, AT-ONE, SHORT ACTION, CLIP FEED, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 55/64" and Point B = 23/32" Center to Center of Action Screws: 5 47/64" Over All Length of Part: 27" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This inletting will fit all T-Bolt models manufactured from 1965-1974. The design of this gun will not allow a free floated barrel. Boyds' inlets will have a barrel pad at the front of the barrel channel. You will need the takedown screw, trigger, and floor plate with screw clip. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE BRNO ZKK-601 FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® TRACKER, 20 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: N/ABottom Tang Length: N/AStock Height at Receiver: 1 3/4"Stock Width at Receiver: 1 15/32"Comes with 3/4" vented recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS  Please see our H&R round tang stock for older tanged receiver models.

COTTER & CO. 645C 12 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 3 1/4" Stock Height at Receiver: 1 5/8" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 13 1/2" Come with Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

LH HERITAGE CZ 527 VARMINT, SHORT ACTION, DETACHABLE BOX MAGAZINE, BULL BARREL CHANNEL, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Where the barrel meets receiver / Point A = .990" 9 inches in front of Point A/ Point B = .890" Center to Center of Action Screws: 5.5”;Over All Length of Part: 31 7/16"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AP BROWNING® BPS 20 GA STOCK ZZ Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 23/32" Stock Width at Receiver - 1 3/8" Overall Length of the Stock- 12 13/16" Measurement of Receiver Mounting Bolt - 5 1/4" Comes with Pachmayr Decelerator Recoil Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

FOX® MODEL B, TYPE 2, 12GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/4" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FOX® SERIES F, 16 GA, BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 7/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

RIMFIRE THUMBHOLE CZ® 527 AMERICAN, SHORT ACTION, CLIP FEED, LH ACTION, BULL BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 0.99" and Point B = 0.885"Center to Center of Action Screws: 5.5" Over All Length of Part: 31.25"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC, ENFIELD® P-17, FLAT FLOOR PLATE #1, BARREL CHANNEL Barrel dimensions: Point A = 1.315” Point B = .745” Center to Center Action Screws: 7.965” Enfield P-17’s with flat floor plates are a custom build that have had the original “stepped” floor plate and magazine box modified to a flat configuration, and generally have been rebarreled with a “sporter” barrel contour. Please review barrel dimensions and be aware that fitting or altering the floor plate and barrel channel in let may be required for your firearm.

CENTRAL ARMS, DBL DRAWBOLT 16 GA SEMI BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

Rear Receiver Height 2.340 Front Receiver Height 2.340 Rail Thickness for Receiver 1.710 Tapered Forend Width at the End 1.500 & Height at the End 1.640 What is the RECEIVER? - The receiver is what holds the mechanical parts of the firearm. This stock has the BOYDS' Blaster shape; however, the inletting and final sanding and finish has been LEFT up to the customer for their desired action. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BROWNING® 81 BLR, FOREND, ZZ Barrel Channel Point at Rear: 1.116"Barrel Channel Point at Front: 0.657"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 9.12"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the barrel band/pin and mounting bolt and spacers from the factory forend.ATTENTION CUSTOMERS: This forend is for models made from 1969 to 1980 with a front receiver height of 2.10" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

C.I.L 720, TYPE 2 .410GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/4" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® 1915, ROUND TANG, 20 GA STOCK, ZZ Top Tang Width: 0.435"Top Tang Length: 1.530"Bottom Tang Width: 0.435"Bottom Tang Length: 1.675"Stock Height at Receiver: 1.270"Stock Width at Receiver: 1.000"Overall Length of Stock:12.600"Measurement of Receiver Mounting Bolt: 9.75"BUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the takedown bolt and washer from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

STERLING COAST TO COAST 660 12 GA STOCK, ZZ Stock comes with mounting bolt. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 3/8" Stock Height at Receiver: 1 13/16" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 12 3/4" Comes with 3/4" vented pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLASSIC DICKSON GOLDEN BEAR, SHORT ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 1/4" and Point B = 13/16" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:This stock is designed for the DICKSON GOLDEN BEAR Short Action, with factory tapered barrel channel. Numerous other models have been manufactured using this action design.

FOX® B-E, 20 GA, SEMI BEAVERTAIL, FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CLASSIC BRNO ZKK-601 LH STOCK RH ACTION FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

RIMFIRE VARMIT THUMBHOLE, GLENFIELD® 60, FACTORY BARREL CHANNEL STOCK, ZZ Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: N/A" Width of Trigger Guard: 7/8" Length of Trigger Guard: 4 1/2" Over All Length of Part: 30 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to fit the Marlin Model 60 tube feed with the U shaped trigger guard. (See inletting photos). Early model trigger guards are longer and are shaped differently. DIP Products sells new U-shaped trigger guards for the Model 60/Glenfield 60 if needed. May also require aftermarket screws not supplied by DIP or Boyds. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM CZ 527 VARMINT, SHORT ACTION, DETACHABLE BOX MAGAZINE, BULL BARREL CHANNEL, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Where the barrel meets receiver / Point A = .990" 9 inches in front of Point A/ Point B = .890" Center to Center of Action Screws: 5.5”;Over All Length of Part: 31 7/16"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.