Boyds® will be closed on 1/1/2025. Have a Happy New Year!

Gunstocks

:
12886 products
  • REM 700 MUZZLELOADER SA LH ...

    LH FT REM 700 MUZZLELOADER SA LH STK RH ACT FBC Maroon Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 55/64"Center to Center of Action Screws: 6 1/2"Over All Length of Part: 31 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: Not compatible with the Ultimate Muzzleloader. This stock is design with the ramrod channel.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $194.00
    View Details
  • REM 700 SA DBM HAWKINS PREC...

    CLA REM 700 SA DBM HAWKINS PRECISION BOTTOM METAL LEFT HAND STOCK RIGHT HAND ACTION FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Laser Panel Adjustable Comb Barrel Channel Dimensions: Point A - 1 1/4" Point B - 3/4" Center to Center Action Screws: 6 1/2" Comes with Boyds 1/2" recoil pad. ATTENTION CUSTOMERS: This inlet is machined to accept the Hawkins Precision M5 Detachable Box Magazine Short Action Bottom Metal. You will need to purchase the Hawkins Precision M5 Bottom Metal separately. Inlet is not milled for Hawkins pillars due to end user preference. Refer to Hawkins Precision for specifics of the M5 Detachable Box Magazine. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $197.60 $304.00
    View Details
  • BROWNING® A-5 12 GA STK

    BROWNING® A-5 12 GA STK Coyote Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 3 1/4" Stock Height at Receiver: 1 5/8" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 13" Measurement of Receiver Mounting Bolt: N/A" Come with Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. This item is not made for the new production A-5 which was introduced in 2012. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $143.00
    View Details
  • Pro V Cf Benjamin® Marauder...

    Barrel Dimensions: Point A = .883" and Point B = .883"Center to Center of Action Screws: n/a" Over All Length of Part: 31.4375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the trigger guard, takedown screw and wood screw from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTN: Center of regulator hole to center of action screw hole spacing is 2.348".

    Price: 

    $189.00
    View Details
  • KIMBER 84M SA FBC

    FT KIMBER 84M SA FBC Pepper Satin Finish Pachmayr Pad Pillar Bedding LOP 14 1/4" It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64" Center to Center of Action Screws: 6 9/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $180.70 $278.00
    View Details
  • BROWNING A-BOLT LEFT HAND S...

    PLATINUM BROWNING A-BOLT 2 LEFT HAND STOCK RIGHT HAND ACTION FBC Nutmeg Satin Finish Boyds Pad Laser Panel ATTENTION CUSTOMERS: LIP/EDGE FROM SANDING OPPOSITE SIDE TO THE BOLT CUT. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions:Where Barrel meets the receiver/ Point A = 1.175" Barrel Dimensions: 9 inches in front of Point A/ Point B = .680 Center to Center of Action Screws: 7.2" Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $155.35 $239.00
    View Details
  • Pro V Cz® 452-2e American S...

    PRO VARMINT CZ® 452-2E AMERICAN, SHORT ACTION, CLIP FEED, LH ACTION, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = .99" and Point B = .712"Center to Center of Action Screws: 3.235"Over All Length of Part: 27.0"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, trigger plate and clip from the factory stock. ATTENTION CUSTOMERS: Not compatible with ZKM model variations. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect."

    Price: 

    $189.00
    View Details
  • Hert Mauser M18 Dbm Lh Stk ...

    HERITAGE, MAUSER M18, DETACHABLE MAGAZINE, LEFT HAND STOCK, RIGHT HAND ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Plat Mauser M18 Dbm Lh Stk ...

    PLATINUM, MAUSER M18, DETACHABLE MAGAZINE, LEFT HAND STOCK, RIGHT HAND ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect .

    Price: 

    $270.00
    View Details
  • Hert Mauser M18 Dbm

    HERITAGE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Plat Mauser M18 Dbm

    PLATINUM, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Ph Mauser M18 Dbm Lh Stk Rh...

    PRAIRIE HUNTER, MAUSER M18, DETACHABLE MAGAZINE, LEFT HAND STOCK, RIGHT HAND ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Vt Mauser M18 Dbm

    VARMINT THUMBHOLE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Pv Mauser M18 Dbm

    PRO VARMINT, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Ph Mauser M18 Dbm

    PRAIRIE HUNTER, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Ft Mauser M18 Dbm Lh Stk Rh...

    FEATHERWEIGHT THUMBHOLE, MAUSER M18, DETACHABLE MAGAZINE, LEFT HAND STOCK, RIGHT HAND ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Ft Mauser M18 Dbm

    FEATHERWEIGHT THUMBHOLE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Cla Mauser M18 Dbm Lh Stk R...

    CLASSIC, MAUSER M18, DETACHABLE MAGAZINE, LEFT HAND STOCK, RIGHT HAND ACTION, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Cla Mauser M18 Dbm

    CLASSIC, MAUSER M18, DETACHABLE MAGAZINE FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $270.00
    View Details
  • Agility Mauser M18 Dbm

    AGILITY MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $323.00
    View Details
  • Spike Camp Mauser M18 Dbm

    SPIKE CAMP THUMBHOLE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $225.00
    View Details
  • At-one Mauser M18 Dbm

    AT-ONE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $323.00
    View Details
  • At-one Thumbhole Mauser M18...

    AT-ONE THUMBHOLE, MAUSER M18, DETACHABLE MAGAZINE, FACTORY BARREL CHANNEL Barrel Dimensions: Point A = 1 1/8" and Point B = 3/4" Center to Center of Action Screws: 7 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your factory Box Magazine. Boyds will provide the floor plate with trigger guard attached, front and rear action screws, and lug. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $323.00
    View Details
  • Browning® Bar Mkii Fe

    Browning® Bar Mkii Fe Black Textured Paint Laser Panel: Stippling It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect . All Rapid Fire sales are final! Nonreturnable & nonrefundable.

    Price: 

    $75.40 $116.00
    View Details
  • Pro V Knight® Lk-93 (54 Ca...

    Barrel Dimensions: Point A = At lug =1.010" and Point B = 9" in front of lug = .930"Center to Center of Action Screws: single action screw Over All Length of Part: 31.4375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the trigger guard, ramrod spring & t-nut from your factory stock. We will provide trigger guard screws and escutcheons.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • Pro V Cf Benjamin Marauder ...

    Barrel Dimensions: Point A = 1.25" and Point B = 1.25" Over All Length of Part: 31.716" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : You will need the trigger guard, and take down screws from your factory stock. We will provide Escutcheon. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION: Center of regulator hole to center of action screw hole spacing will be 1.9".

    Price: 

    $189.00
    View Details
  • Pro V Anshutz® 64 Sa Clip F...

    Barrel Dimensions: Point A = 0.86" and Point B = 0.68" Center to Center of Action Screws: 6.02" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need the floor plate, takedown screws, machine screw/nut and trigger assembly from you factory stock.  All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • Pro V Cf Knight® D.i.s.c. ....

    Barrel Dimensions: Point A = 1.09" and Point B = 0.95"Center to Center of Action Screws: Single Takedown Screw" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:______________. You will need the Ram Rod Tension Spring & Trigger Guard from your factory stock. We will provide Black Escutcheon.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • Pro V Marlin® Xt 22 Mag Bol...

    PRO VARMINT MARLIN® XT 22 MAG BOLT, SHORT ACTION, TUBE FEED, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 0737" and Point B = 0.749"Center to Center of Action Screws: n/a" Over All Length of Part: N/AComes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 0737" and Point B = 0.749"Center to Center of Action Screws: n/a" Over All Length of Part: 27"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS : You will need take down screws and trigger guard from the factory stock. ATTENTION CUSTOMERS: If converting from composite stock to a Boyds hardwood gunstock you will need to purchase the Marlin Rimfire Trigger Guard on the Accessories page, part number A09166. They can be found on the Accessories page.**All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • At-one Mossberg® 500 20 Ga Fe

    AT-ONE MOSSBERG 500 20 GA FE It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 Magazine Tube Shoulder to Shoulder: 6 3/4 Over All Length of Part: 9 1/4 ATTENTION CUSTOMERS : On your action slide tube, measure from top of threads to bottom of collar that holds the action bars. This measurement is critical! This forend is for the 7 5/8" action slide. If your action slide measures 6 1/2", see our American Plainsman Bantam Forend Shape! NOTE: Since 2006, some newer models shotguns with synthetic forearms may not use an action slide tube at all; rather, the pump handle will have two integral bars pinned into the handle itself. If you have one of these, you cannot use a forearm that was designed to go over an action slide tube without first buying the correct length tube and action slide tube nut. You may contact Havlin Sales at 636-937-6401 to obtain proper components. ATTENTION: Boyds Mossberg pump action fore arms (500 & 835) are designed for a two piece Slide Action Tube, i.e. there is a Slide Tube nut that holds the fore arm onto the Action Tube. If you have a one piece Slide Action Tube, i.e. the Action Bars are pinned to the fore arm and are integral, you will need to purchase the appropriate length/gauge of two piece Slide Action Tube and Slide Action Tube Nut. These are available from gun parts stores such as Midway USA or Brownells. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $79.00
    View Details
  • Cva Scout V2 Non Takedown Fe

    CVA SCOUT V2 NON TAKEDOWN FE ZZBarrel Channel Point at Rear: 1" Barrel Channel Point at Front: 15/16" Receiver Edge to Center of Mounting Screw: N/A" Magazine Tube Width: N/A" Center to Center of Mounting Screws: 6 7/16"" Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 10 1/2" It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : You will need the 2 factory forend mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $79.00
    View Details
  • Pro Varmint Marlin® Xt-17 C...

    PRO VARMINT MARLIN® XT-17, CLIP FEED, BULL BARREL CHANNEL Barrel Dimensions: Point A = 13/16" and Point B = 13/16"Center to Center of Action Screws: 4 7/8"Over All Length of Part: N/AComes with Boyds' 1/2" Rubber Recoil PadIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: These stocks are designed for inlett trigger guard and floor plate. Variations exist on the safety for this model, minor fitting of safety may be needed.ATTENTION CUSTOMERS: You will need your takedown screws, trigger guard, and screw from your original stock. ATTENTION CUSTOMERS:If converting from composite stock to a Boyds hardwood gunstock you will need to purchase the Marlin Rimfire Trigger Guard on the Accessories page, part number A09166.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • Pro Varmint Marlin® 917 Cli...

    PRO VARMINT MARLIN® 917, CLIP FEED, BULL BARREL CHANNEL Barrel Dimensions: Point A = 13/16" and Point B = 13/16"Center to Center of Action Screws: 4 7/8"Over All Length of Part: N/A w/padComes with Boyds' 1/2" Rubber Recoil PadIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: These stocks are designed for inlett trigger guard and floor plate. Variations exist on the safety for this model, minor fitting of safety may be needed. ATTENTION CUSTOMERS:If converting from composite stock to a Boyds hardwood gunstock you will need to purchase the Marlin Rimfire Trigger Guard on the Accessories page, part number A09166.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
  • Pv Cz 453 Varmint 22 Lr Sa ...

    PV CZ 453 VARMINT 22 LR SA CLIP FEED FBC Barrel Dimensions: Point A = 0.985" and Point B = 0.851"Center to Center of Action Screws: 3.25"Over All Length of Part: 28 1/4" w/padComes with Boyds' 1/2" Rubber Recoil Pad.Attn: Customers:  You will need the trigger guard, trigger plate, take down screw & wood screw from your original stock.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

    Price: 

    $189.00
    View Details
12886 products