Gunstocks

PLAT RUGER GUNSITE SCOUT SA LH STK RH ACT DBM FBC PEPPER SATIN FINISH BOYDS PAD WALNUT GRIP CAP LOP 13 1/4" PILLAR BEDDING ATTENTION CUSTOMERS: FINISH FLAWS, DENTED BY TRIGGER GUARD Barrel Dimensions: Point A = 1 5/32" and Point B = 3/4" Center to Center of Action Screws: 6 45/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: If you are purchasing this stock as a replacement to a Polymer Stocked GSR, you will need to purchase or acquire a bottom metal kit to complete the build. You will need your takedown screws, trigger guard, mag box assembly, forward takedown/mag box retainer, and magazine.ATTENTION CUSTOMERS: We do not machine or provide for the factory threaded cross bolt behind the mag well on this model. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows other Ruger American rifles to be converted to allow the use of the Ruger AI-Style magazines with compatible calibers when they are assembled to a Boyds stock. Not compatible with 7.62x39 calibers. See compatible calibers here: Ruger American Magazine Styles

Intended use for attachment with mono pod shooting stabilizer on the Boyds At-One Gunstock for the rear bottom of buttstock. One-to-one modular component will exchange with a standard bottom cap. Dimensionally the same as the standard bottom cap with a 3-slot section Picatinny rail built in. CNC machined aluminum with black anodization. Remove standard bottom cap and install new bottom cap with Picatinny rail section. Attention customers: this part in not intended for use on the forend section of the stock!

This butt pad is easily installed onto the At-One™, Agility™, Spike Camp™, and Quest gunstocks using a 1/8" Allen Wrench. If you are installing this 1" butt pad on a Spike Camp™ gunstock, you will need to use the screws from your Boyds gunstock's 1/2" pad, not the supplied screws with this 1" butt pad accessory. They will be too short.

This 1/2" Kick-eez brand recoil pad fits At-One™ series, Agility™, Spike Camp™, and Quest gunstocks.

Beaver-style; flat design forend. Width 2" at rear to 1-13/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Sleek and slender standard forend. Width 1-3/4" at rear to 1-7/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Gun Metal Grey Extended buttplate for At-One series and Agility stocks. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Gun Metal Grey Buttplate for At-One series and Agility stocks. Approximately 12-1/2" to 14" Length of Pull. 1/2" thick over molded (rubber) recoil pad.

This extended LOP butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

This butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

ROTATING AT-ONE & AGILITY BUTT ASSEMBLY Attaches to the existing butt plate of the At-One and Agility adjustable butt plate assembly. It will provide rotation on the recoil pad to allow the user to position the pad to fit their shooting style. To install: Remove the butt pad from the adjustable butt plate assembly, attach using the mounting screws and reattach the butt pad. Increases LOP by approximately 3/4" when installed. Will work in conjunction with the vertically adjustable assembly. Technical Specification: 5.7 degrees per rotation index, 40 degrees per side (right and left) with 80 degrees of full index range. Engraved index identifier marks. Aluminum housing, stainless dowel pins, black phosphate steel snap ring. Black anodized coating. The threaded knob is hard anodized and Teflon impregnated to prevent gulling of the threads. Operates without tools.

Thicker, more vertical grip designed for prone shooting. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Thicker, more vertical grip designed for prone shooting. Plastic substrate – Super Tough, Impact Modified, Heat Stabilized Nylon. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Swept back pistol grip design. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.