Gunstocks

FEATHERWEIGHT THUMBHOLE, GOLDEN STATE MAUSER®, LR, #1 BARREL CHANNEL, LH STOCK, RH ACTION, ZZ Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Length of Floor Plate 8 11/16" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour Barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BROWNING® GOLD HUNTER, 20 GA STOCK, ZZ Top Tang Width: n/a"Top Tang Length: n/a"Bottom Tang Width: 0.45"Bottom Tang Length: 0.85"Stock Height at Receiver: 1.825"Stock Width at Receiver: 1.31"Overall Length of Stock:13"Measurement of Receiver Mounting Bolt: n/a"BUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:We will provide a washer.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AMERICAN PLAINSMAN COAST TO COAST 660 20 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 5/16"Bottom Tang Length: 11/16"Stock Height at Receiver: 13/16"Stock Width at Receiver: 1 3/8"Overall Length of Stock: 12 3/4"Measurement of Receiver Mounting Bolt: 5 1/2"Comes with Pachmayr® Decelerator® recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRO VARMINT, MAUSER® VZ-24, #1 BARREL CHANNEL Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Length of Floor Plate 8 11/16" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour Barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® WHITE POWDER WONDER, RND TANG, 12 GA STOCK, ZZ PLEASE CONFIRM MEASUREMENTS PRIOR TO ORDERING. Top Tang Width - 1/2" Top Tang Length - 1 7/16" Bottom Tang Width - 1/2 " Bottom Tang Length - 1 1/2 " Stock height at receiver -1 21/32" Stock width at receiver - 1 1/2" Measurement of Receiver Mounting Bolt: 10 1/2" Comes with plastic buttplate ATTENTION CUSTOMERS: This stock is compatible with most standard frame round tang receivers. Due to the many variations of this model, minor fitting may be needed.

CLASSIC BROWNING A-BOLT MICRO SHORT ACTION LH STOCK RH ACTION FACTORY BARREL CHANNEL ZZ style="color:red;">It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 11/64" and Point B = 43/64"Center to Center of Action Screws: 7 13/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS: Before you order, you must confirm, by serial number, if your firearm model is an A-Bolt, A-Bolt II (2), or A-Bolt III (3). The roll stampings on all versions only states A-Bolt regardless of model. Also, you will need to confirm if your particular firearm is a Micro version or not. Micro versions are different than the standard models. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

STERLING LH H&R® TRACKER, 20 GA STOCK, ZZ Stock comes with mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models.

FOX® MODEL B-E, TYPE 2, 20GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/4" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER BRNO ZKK-601 FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CRESCENT .410 GA SPRING CLIP SINGLE FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/32" Barrel Channel Point B: 11/16" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A Over All Length of Part: 9" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS: No mounting hardware is included. This forend is for internal mounted springclip. Variations of mounting hardware exist, fitting of your hardware may be needed.

SS EVO CZ® 527 AMERICAN, SHORT ACTION, CLIP FEED, LH ACTION, BBULL BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 0.99" and Point B = 0.885"Center to Center of Action Screws: 5.5" Over All Length of Part: 27"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FOX® SERIES F, 16 GA, SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CLASSIC CZ 550 AMERICAN, LONG ACTION ,FACTORY BARREL CHANNEL, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64"Center to Center of Action Screws: 7 53/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, and mag well. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect

STERLING BROWNING® BPS 20 GA STOCK ZZ Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 23/32" Stock Width at Receiver - 1 3/8" Overall Length of the Stock- 12 13/16" Comes with 3/4" vented pad Stock Comes with Mounting Bolt It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.

FOX® B 20 GA SEMI BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CENTRAL ARMS, DBL DRAWBOLT .410 GA SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Receiver Edge to Center of Mounting Screw: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A " Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:These forends are designed to accept Internal spring clip hardware. Do to variations for this model final fitting of hardware and the drilling for mounting screws may be required.

FEATHERWEIGHT THUMBHOLE, ENFIELD® P-17, FLAT FLOOR PLATE, #1 BARREL CHANNEL, ZZ, FINISHED Barrel dimensions: Point A = 1.315” Point B = .745” Center to Center Action Screws: 7.965” Enfield P-17’s with flat floor plates are a custom build that have had the original “stepped” floor plate and magazine box modified to a flat configuration, and generally have been rebarreled with a “sporter” barrel contour. Please review barrel dimensions and be aware that fitting or altering the floor plate and barrel channel in let may be required for your firearm.

Rear Receiver Height 1.68 Front Receiver Height 1.4 Rail Thickness for Receiver 1.6 What is the RECEIVER? - The receiver is what holds the mechanical parts of the firearm. This stock has the BOYDS' SS Evolution??? shape; however, the inletting and final sanding and finish has been LEFT up to the customer for their desired action. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

C.I.L. 621, 12 GA RIBBED FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/8 Magazine Tube Shoulder to Shoulder: 4 1/2 Over All Length of Part: 6 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BROWNING® GOLD HUNTER, 20 GA FOREND, ZZ Barrel Channel Point at Rear: 1.258"Barrel Channel Point at Front: 0.847"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.325"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 9.903"Over All Length of Part: 11.717"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine tube cap from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.