Gunstocks

STRAIGHT GRIP WINCHESTER® 94 WRANGLER STK ZZIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTIONCUSTOMERS: Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts.

It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

NORINCO 92 Stock It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLAT RUGER GUNSITE SCOUT SA LH STK RH ACT DBM FBC PEPPER SATIN FINISH BOYDS PAD WALNUT GRIP CAP LOP 13 1/4" PILLAR BEDDING ATTENTION CUSTOMERS: FINISH FLAWS, DENTED BY TRIGGER GUARD Barrel Dimensions: Point A = 1 5/32" and Point B = 3/4" Center to Center of Action Screws: 6 45/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: If you are purchasing this stock as a replacement to a Polymer Stocked GSR, you will need to purchase or acquire a bottom metal kit to complete the build. You will need your takedown screws, trigger guard, mag box assembly, forward takedown/mag box retainer, and magazine.ATTENTION CUSTOMERS: We do not machine or provide for the factory threaded cross bolt behind the mag well on this model. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows other Ruger American rifles to be converted to allow the use of the Ruger AI-Style magazines with compatible calibers when they are assembled to a Boyds stock. Not compatible with 7.62x39 calibers. See compatible calibers here: Ruger American Magazine Styles

Intended use for attachment with mono pod shooting stabilizer on the Boyds At-One Gunstock for the rear bottom of buttstock. One-to-one modular component will exchange with a standard bottom cap. Dimensionally the same as the standard bottom cap with a 3-slot section Picatinny rail built in. CNC machined aluminum with black anodization. Remove standard bottom cap and install new bottom cap with Picatinny rail section. Attention customers: this part in not intended for use on the forend section of the stock!

This butt pad is easily installed onto the At-One™, Agility™, Spike Camp™, and Quest gunstocks using a 1/8" Allen Wrench. If you are installing this 1" butt pad on a Spike Camp™ gunstock, you will need to use the screws from your Boyds gunstock's 1/2" pad, not the supplied screws with this 1" butt pad accessory. They will be too short.

This 1/2" Kick-eez brand recoil pad fits At-One™ series, Agility™, Spike Camp™, and Quest gunstocks.