Gunstocks

PLAT, DICKSON GOLDEN BEAR LONG ACTION, FACTORY BARREL CHANNEL, ZZ, FINISHED Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 3/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:This stock is designed for the DICKSON GOLDEN BEAR Long Action. Numerous other models have been manufactured using this action design.

CLASSIC, ENFIELD® P-17, LH STOCK, RH ACTION, MILITARY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1 11/32" and Point B = 25/32"Center to Center of Action Screws: 8"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: P-17 stocks are cut for the original military barrel channel and use the original stepped style floor plate. If you are using a straightened non-step design floor plate, modification and refinishing will be required. These are Sporter stocks, they are not cut for barrel bonds and are not intended to be used with handguard.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

GLENFIELD® 30A, STRAIGHT GRIP STOCK, ZZ Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

BIG STATE ROUND TANG .410 GA STOCK ZZ PLEASE CONFIRM MEASUREMENTS PRIOR TO ORDERING. Top Tang Width - 1/2" Top Tang Length - 1 7/16" Bottom Tang Width - 1/2 " Bottom Tang Length - 1 1/2 " Stock height at receiver -1 21/32" Stock width at receiver - 1 1/2" Measurement of Receiver Mounting Bolt: 10 1/2" Comes with plastic buttplate ATTENTION CUSTOMERS: This stock is compatible with most standard frame round tang receivers. Due to the many variations of this model, minor fitting may be needed.

FOX® B BEAVERTAIL FOREND, 12 GA, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: N/A" Center to Center of Mounting Screws: N/A" Over All Length of Part: 9 " Over All Width of part: 2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:This forend is designed for mounting hardware measuring 4 13/16" long and 5/8ths wide with interior mounting screws. Forends are not pre drilled for mounting screws.

RIMFIRE VARMIT THUMBHOLE BROWNING T-BOLT SHORT ACTION CLIP FEED FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 55/64" and Point B = 23/32" Center to Center of Action Screws: 5 47/64" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This inletting will fit all T-Bolt models manufactured from 1965-1974. The design of this gun will not allow a free floated barrel. Boyds' inlets will have a barrel pad at the front of the barrel channel. You will need the takedown screw, trigger, and floor plate with screw clip. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FOX® SERIES F, 12 GA, SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

CLASSIC CZ® 527 AMERICAN, SHORT ACTION, CLIP FEED, LH STOCK, LH ACTION, BULL BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 0.99" and Point B = 0.885"Center to Center of Action Screws: 5.5" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® TRACKER, 12 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: N/ABottom Tang Length: N/AStock Height at Receiver: 1 3/4"Stock Width at Receiver: 1 15/32"Comes with 3/4" vented recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS  Please see our H&R round tang stock for older tanged receiver models.

CHICAGO LONG RANGE WARDEN .410 GA SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Receiver Edge to Center of Mounting Screw: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A " Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:These forends are designed to accept Internal spring clip hardware. Do to variations for this model final fitting of hardware and the drilling for mounting screws may be required.

CENTRAL ARMS, DBL DRAWBOLT 20 GA BEAVERTAIL FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" Over All width at receiver: 1 7/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

HERT BROWNING® AB-2 SSA 2PC HINGED FP, LH, FACTORY BARREL CHANNEL, ZZ Barrel Dimensions: Point A = 1.176" and Point B = .842"Center to Center of Action Screws: 6.66"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the floor plate, take down screws, trigger guard and screw from your factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

C.I.L 720, TYPE 2 20GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/4" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FOX® B-E 12 GA SPLINTER FOREND, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model.

PLATINUM BRNO ZKK-600 FACTORY BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 7/64" and Point B = 3/4" Center to Center of Action Screws: 7 53/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your takedown screws, mag liner, follower, and floorplate for your original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM BRNO MAUSER #1 BARREL CHANNEL ZZ Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

LH PRAIRIE HUNTER CZ 527 VARMINT, SHORT ACTION, DETACHABLE BOX MAGAZINE, BULL BARREL CHANNEL, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Where the barrel meets receiver / Point A = .990" 9 inches in front of Point A/ Point B = .890" Center to Center of Action Screws: 5.5”;Over All Length of Part: 31 7/16"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

H&R® 1908, ROUND TANG, .410 GA STOCK, ZZ PLEASE CONFIRM MEASUREMENTS PRIOR TO ORDERING. Top Tang Width - 1/2" Top Tang Length - 1 7/16" Bottom Tang Width - 1/2 " Bottom Tang Length - 1 1/2 " Stock height at receiver -1 21/32" Stock width at receiver - 1 1/2" Measurement of Receiver Mounting Bolt: 10 1/2" Comes with plastic buttplate ATTENTION CUSTOMERS: This stock is compatible with most standard frame round tang receivers. Due to the many variations of this model, minor fitting may be needed.

COTTER & CO 167T (TOP REC SAFETY) 12 GA STOCK, ZZ It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: 5/8" Top Tang length: 1 3/8" BottomTang width: 5/8" BottomTang length: 1 3/8" Stock height at receiver: 1 9/16" Stock width at receiver: 1 3/8" Overall Length of Stock: 13 1/4" Measurement of Receiver Mounting Bolt: 4 1/2" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.