***Australian postal service has suspended delivery until further notice.***

For updates on International Mail Service Suspensions, please refer to USPS.
Please email
Customer Service for a list of Australian dealers that may be able to help with your order; help@boydsgunstocks.com.

Rapid Fire Products

:
368 products
Items per page: 40 80 120 View All
  • BROWNING AB-2 SSA 2-PC FLOO...

    FT BROWNING AB-2 SSA 2-PC FLOOR PLATE FBC Pepper Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1.176" and Point B = .842" Center to Center of Action Screws: 6.66" Over All Length of Part: 31.5" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : You will need the floor plate, take down screws, trigger guard and screw from your factory stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • STEVENS® 820 12GA STOCK

    STEVENS® 820 12GA STOCK Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A" Top Tang Length: N/A" Bottom Tang Width: 3/4" Bottom Tang Length: 5/16" Stock Height at Receiver: 2 7/16" Stock Width at Receiver: 1 11/32" Overall Length of Stock:13 1/4" Measurement of Boyds'Receiver Mounting Bolt: 5 1/2" BUTTPLATE ATTENTION CUSTOMERS:Known variations exist on this model you need to confirm supplied dimensions with your firearm . All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • REMINGTON® 742 CAP STYLE FE

    REMINGTON® 742 CAP STYLE FE Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 1 5/32"Barrel Channel Point B: 25/32"Receiver Face to Shoulder of Mounting Cap: 10 21/64"Over All Length of Part/Shoulder to Shoulder: 10 3/4"ATTENTION CUSTOMERS: You will need the liner, front mounting cap, and screw from the original forend. This forend requires a metal liner with front mounting screw sleeve for installation; which is not included. The metal liner from the original forend may be used if it is not damaged, deformed or modified in any way. The removal of metal liner from the original forend will require original forend to be split into 2 pieces, making it unusable once completed. Before installing forend liner ensure all surfaces are free from dried adhesive debris. Rubbing alcohol, or other cleaning agent that will not hinder new adhesive performance, should be used to clean the metal surfaces. Slight fitting may be required to properly fit you specific liner. Make sure the forend retains its intended shape when the liner is installed. Dry fit the metal liner into forend, and onto gun, to ensure proper fit and function. Ensure all inletted surfaces of forend are completely free from debris before applying adhesive. Generously, apply Acraglas adhesive to all inletted surfaces of forend that the liner will make contact with. Also, apply adhesive to metal liner if necessary to ensure proper function of the gun. Once installed make sure to let adhesive dry according to manufactures specifications before use.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • REMINGTON® 760 GAMEMASTER F...

    REMINGTON® 760 GAMEMASTER FOREND Zombie Hunter Satin Finish Barrel Channel Point at Rear: 1.237"Barrel Channel Point at Front: 0.789"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 0.875"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 3.985"Over All Length of Part: 7.809"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • BROWNING BAR MKII FOREND

    FT REM 700 ADL SHORT ACTION FBC Nutmeg Satin Finish Boyds Pad Pillar Bedding ATTENTION CUSTOMERS: CHIP OUT OF TIP OF FOREND ON TOP, OUTER EDGE OF INLET. Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 6 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlett for standard factory tapered barrel channel and is designed for the Remington 700 right hand short action with blind magazine, loads and unloads through top of action. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • Browning Bar Safari Forend

    Browning Bar Safari Forend ClaroX Walnut Satin Finish Barrel Channel Point at Rear: 1.275"Barrel Channel Point at Front: 0.750"Receiver Edge to Center of Mounting Screw: 9.669"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 13.00"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the original swivel stud and mounting screw from the factory forend. We will provide the bushing and spacer where the swivel stud mounts to the gun.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $117.00 $180.00
    Available: 
    1
    View Details
  • SAV 110 1ST GENERATION SA B...

    CLA SAV 110 1ST GENERATION SA BLIND MAG FBC Pepper Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1.028" and Point B = .715"Center to Center of Action Screws: 4.51" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Recoil to front action screw: 1.01" This inlet is for Savage 110 1st Generation Firearms. They are also referred to as "J" series or intermediate models. You will need the take down screws, trigger guard and mag box & spring from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    HERT SAV 110 BBR DETACHABLE MAG LA LH STH LH ACT FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 110 TBR, BLIND MAGAZINE...

    SPIKE CAMP SAV 110 TBR, BLIND MAGAZINE, LONG ACTION, CENTER FIRE, LH ACTION, FACTORY BARREL CHANNEL Pepper High Gloss Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside of the stock when the barreled action is removed. If the magazine box stays attached to the action you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $132.60 $156.00
    Available: 
    1
    View Details
  • REM 788 LONG RECEIVER, LEFT...

    HERT REM 788 LONG RECEIVER, LEFT HAND STOCK, RIGHT HAND ACTION, FBC Forest Camo Satin Finish Boyds Pad ATTENTION: DENT ON COMB, PRESENT IN PHOTO. Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16"Center to Center of Action Screws: 7"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: This stock is designed for the Remington 788 Long Action.Long action Calibers- 243 Win, 6mm Rem, 7mm-08 Rem, 308 Win.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    SPIKE CAMP SAV 110 BBR DETACHABLE MAG LA LH ACT FBC Pepper Satin Finish Boyds Pad ATTENTION: DEEP SCRATCH ON SIDE OF FOREND NEAR GRIP. CIRCLED ON STOCK. Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • CZ 452 2E AMERICAN SA MAGAZ...

    RVT CZ 452 2E AMERICAN SA MAGAZINE FEED FBC Zombie Hunter Satin Finish Boyds Pad Barrel Dimensions: Point A = .99" and Point B = .712"Center to Center of Action Screws: 3.235"Over All Length of Part: 31.25"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, trigger plate and clip from the factory stock. ATTENTION CUSTOMERS: Not compatible with ZKM model variations.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • WINCHESTER® 92 STK

    WINCHESTER® 92 STK Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Remington 11 Type 2 12 Gaug...

    Remington 11 Type 2 12 Gauge Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 3 1/4" Stock Height at Receiver: 1 5/8" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 13 1/2" Come with Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Mossberg 500 12 Gauge Bant...

    American Plainsman Mossberg 500 12 Gauge Bantam Forend F Blaze Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 Magazine Tube Shoulder to Shoulder: 5 3/4 Over All Length of Part: 9 1/4 ATTENTION CUSTOMERS: On your action slide tube, measure from top of threads to bottom of collar that holds the action bars. This measurement is critical! This forend is for the 6 1/2" action slide. If your action slide measures 7 5/8", see our American Plainsman Forend Shape! NOTE: Since 2006, some newer models shotguns with synthetic forearms may not use an action slide tube at all; rather, the pump handle will have two integral bars pinned into the handle itself. If you have one of these, you cannot use a forearm that was designed to go over an action slide tube without first buying the correct length tube and action slide tube nut. You may contact Havlin Sales at 636-937-6401 to obtain proper components. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • Browning A-5 12 Gauge Foren...

    Browning A-5 12 Gauge Forend Walnut Satin Finisht It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: N/A Recoil Spring cut out measures 7 9/16" from front receiver Over All Length of Part: 11 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • Marlin 336 Barrel Band Forend

    Marlin 336 Barrel Band Forend Green Paint It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $52.65 $81.00
    Available: 
    1
    View Details
  • CVA Optima V2 Stock

    CVA Optima V2 Stock Zombie Hunter Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 11/16" Top Tang Length: 13/16" Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 1/4"Stock Width at Receiver: 1 3/8Overall Length of Stock: 14 1/4"Measurement of Receiver Mounting Bolt: 3 1/2"Comes with Boyds plastic butt plate ATTENTION CUSTOMERS: You will need your factory Stock Receiver Bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $65.00 $100.00
    Available: 
    1
    View Details
  • Mossberg Intl 817 Short Act...

    Pro Varmint Mossberg Intl 817 Short Action Factory Barrel Channel Black Textured Boyds Pad Barrel Dimensions: Point A = 0.787" and Point B = 0.787"Center to Center of Action Screws: 5.575" Over All Length of Part: 30.375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the 2-take down screws and clip from your original stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • CZ 527 AMERICAN DBM SA FBC

    CLA CZ 527 AMERICAN DBM SA FBC Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 63/64" and Point B = 45/64" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • SAV 110 TBR DETACHABLE MAG ...

    HERT SAV 110 TBR DETACHABLE MAG LA FBC Walnut Unfinished Boyd Pad LOP 14" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. ATTENTION CUSTOMERS:If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $143.65 $221.00
    Available: 
    1
    View Details
  • MOSS 4X4 DBM SA FBC

    FT MOSS 4X4 DBM SA FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 23/32" Center to Center of Action Screws: 4 23/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety and Bolt Release are on the side of the receiver. ATTENTION CUSTOMERS: OUR STOCK WILL ONLY WORK FOR THE PLASTIC/SYNTHETIC TO WOOD CONVERSION. You will need to use the plastic mag liner from the original factory stock and the front action screw (.930"). Each stock will be supplied with the rear action screw (1.5"), "FLAT FRONT" trigger guard, and wood screw (1"). It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • WIN 93 12 Gauge Stock

    Winchester 93 12 Gauge Stock Walnut Boyds Pad N/A All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $78.65 $121.00
    Available: 
    1
    View Details
  • RUGER AMERICAN RANCH LONG A...

    SPIKE CAMP RUGER AMERICAN RANCH LONG ACTION DBM FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Does not work with AI or AR Mags. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. r> All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.10 $146.00
    Available: 
    1
    View Details
  • Win 70 La 1-pc Fp Fbc Post 64

    Spike Camp Win 70 La 1-pc Fp Fbc Post 64 Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 1 piece floor plate design with standard factory tapered barrel. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $124.95 $147.00
    Available: 
    1
    View Details
  • KIMBER 84M SA FBC

    SPIKE CAMP KIMBER 84M SA FBC Shady Camo Satin Finish Boyds Pad Laser Symbol It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64" Center to Center of Action Screws: 6 9/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $110.50 $170.00
    Available: 
    1
    View Details
  • Ruger American Centerfire A...

    PH RUGER AMERICAN LA FBC Shady Camo High Gloss Finish Pachmayr Pad Walnut Grip Cap Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Not compatible with AI or AR Magazines. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $203.15 $239.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LONG ACTI...

    PLATINUM BROWNING A-BOLT 2 LONG ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL Nutmeg Satin Finish Pachmayr Pad Laser Panel Adjustable Comb Walnut Grip Cap Angled Walnut Tip Cap Barrel Dimensions: Point A = 1 11/64" and Point B = 49/64" Center to Center of Action Screws: 7 59/64" Over All Length of Part: 31/1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $245.38 $377.50
    Available: 
    1
    View Details
  • Sears 53 SA 2-PC FP FBC

    FT Sears 53 SA 2-PC FP FBC Pepper High Gloss Limbsaver Pad Laser Panel Pillar Bedding LOP 14 3/4" Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $226.20 $348.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA RH ...

    HERT SAV 220 SLUG GUN DBM LA RH ACTION FBC Claro XX High Gloss White line spacer kit Boyds Pad Walnut Grip Cap ATTENTION CUSTOMERS: SCUFF MARK ON COMB, DENTS ON LEFT SIDE OF GRIP WHERE THE COMB STARTS. Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $293.15 $451.00
    Available: 
    1
    View Details
  • BROWNING BAR TYPE 1 FOREND

    BROWNING BAR TYPE 1 FOREND Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $64.03 $98.50
    Available: 
    1
    View Details
  • Marlin 1895Gs Cap Style For...

    Marlin 1895Gs Cap Style Forend & Straight Grip Stock Forest Camo Satin Finish Pachmayr Pad Laser Panel FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Rear: 31/64" Barrel Channel at Front: 29/32" Magazine Tube Width: 25/32" Magazine Tube Shoulder to Shoulder: 9 5/8" Over All Length of Part: 9 57/64" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $159.90 $246.00
    Available: 
    1
    View Details
  • REMINGTON® 870 20 GA FE

    AP REMINGTON® 870 20 GA FE Walnut Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: N/ABarrel Channel Point B: N/AMag Tube Width: 1 "Mag Tube Shoulder to Shoulder: 5 3/8 "Over All Length of Part: 9 "Boyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.The Remington 750 is interchangeable with the Remington 870.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • MOSSBERG® 930 12 GA FOREND

    MOSSBERG® 930 12 GA FOREND Sky Satin Finish Barrel Channel Point at Rear: 1.115"Barrel Channel Point at Front: 0.875"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.05"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 1.105"Over All Length of Part: 11.125"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine cap from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $54.60 $84.00
    Available: 
    1
    View Details
  • Rem 760 Takedown Forend

    Remington 760 Takedown Forend Forest Camo Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Width for Receiver Clearance : 1 3/8" Magazine Tube Shoulder to Shoulder: 6 " Over All Length of Part: 8 1/4 " ATTENTION CUSTOMERS:This part is not designed for the early 760 pump with tube nut retainer. This a Boyds' design forend, we do not offer original replacements. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • BROWNING® BPS 10 GA FOREND

    BROWNING® BPS 10 GA FOREND Coyote Satin Finish Barrel Channel Point at Rear: 1.058"Barrel Channel Point at Front: 1.13"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.14"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 5.818"Over All Length of Part: 9.17"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine cap and forend retention nut from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • Browning BPS 12 Gauge Stock

    American Plainsman Browning BPS 12 Gauge Stock F Coyote Satin Finish Pachmayr Pad Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 13/16" Stock Width at Receiver - 1 13/16" Overall Length of the Stock- 12 13/16" Measurement of Receiver Mounting Bolt - 5 1/4" Pachmayr Decelerator Recoil Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $101.40 $156.00
    Available: 
    1
    View Details
  • Remington 870 20 Gauge Stock

    American Plainsman Remington 870 20 Gauge Stock Forest Camo Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 9/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 5/16"Overall Length of Stock: 14"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmayr Decelerator recoil padBoyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the smaller frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $89.05 $137.00
    Available: 
    1
    View Details
  • Weatherby Sa-08 12 Gauge Bu...

    Weatherby Sa-08 12 Gauge Buttstock Walnut Satin Finish Pachmayr Pad Bottom Tang Width: 33/64" Bottom Tang Length: 3/8" Stock Height at Receiver: 2" Stock Width at Receiver: 1 1/2" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 1 1/2" It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $104.00 $160.00
    Available: 
    1
    View Details
  • Cva Optima Stock

    Sterling Cva Optima Stock Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 5/8" Top Tang Length: 1 13/16" Bottom Tang Width: 5/8" Bottom Tang Length: 15/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 11/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 1 3/16"Comes with Pachmayr recoil pad You will need your factory Through bolt. We will provide the Butt Plate, 2 Screws, and a 3/4" Blued Swivel Stud. ATTENTION: This stock is not compatible with the V2 Optima. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $165.75 $255.00
    Available: 
    1
    View Details
  • SAV 16 TBR BLIND MAGAZINE, ...

    FT SAV 16 TBR BLIND MAGAZINE, SHORT ACTION STAGGERED FEED, FACTORY BARREL CHANNEL Royal Jacaranda Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. When you disassemble your action the magazine box will be attached to the receiver. If the magazine box stays inside of the stock when the barreled action is removed, you may need the Center Feed Model or CTF version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $141.70 $218.00
    Available: 
    1
    View Details
  • CLA SAV AXIS DBM LA LH STH ...

    LH CLA SAV AXIS DBM LA LH STH LH ACT FBC Nutmeg Satin Finish Limbsaver Pad Walnut Grip Cap Barrel Dimensions: Point A = 1 1/32" and Point B = 23/32" ATTENTION CUSTOMERS: For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws. Length of Mag Box: 3 49/64" approximately Center to Center of Action Screws: 4 25/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, front mag tab, rear mag tab, and recoil lug are included with the stock. ***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.*** It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $193.05 $297.00
    Available: 
    1
    View Details
  • SAV 212 12 GA LA FBC

    PLAT SAV 212 12 GA LA FBC Nutmeg High Gloss Finish Kick-Eez Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 11/64" and Point B = 31/32"Center to Center of Action Screws: 5 1/16"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, mag box, and trigger guard with screw. ATTENTION CUSTOMERS:ATTENTION CUSTOMERS : This is for the older style floor plate that measures 5.7875. The gun is chambered for a 12 GAUGE shotgun shell. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $169.65 $261.00
    Available: 
    1
    View Details
  • SPIKE CAMP, BROWNING X-BOLT...

    BROWNING X-BOLT, SPIKE CAMP, LONG ACTION, FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 7/64" and Point B = 45/64" Center to Center of Action Screws: 5" Over All Length of Part: 29 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety is located on the tang and the Bolt Release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • Remington 870 12 Gauge Forend

    American Plainsman Remington 870 12 Gauge Forend Shady Camo Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.35 $79.00
    Available: 
    1
    View Details
  • BROWNING X-BOLT SA LH STK L...

    LH PH BROWNING X-BOLT SA LH STK LH ACT FBC Pepper Satin Finish Limbsaver Pad LOP 13 1/4" Barrel Dimensions: Point A = 1 7/64" and Point B = 45/64" Center to Center of Action Screws: 4 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety is located on the tang and the Bolt Release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • WIN 70 SA 2-PC FP FBC POST 64

    CLA WIN 70 SA 2-PC FP FBC POST 64 ClaroXX Walnut Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $279.50 $430.00
    Available: 
    1
    View Details
  • RUGER AMERICAN CENTERFIRE SA

    SPIKE CAMP RUGER AMERICAN CENTERFIRE SA Pepper Satin Finish Boyds Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks will provide the required bedding compound and you must bed the front and rear lugs. ATTENTION: Not compatible with 7.62x39 caliber due to steel mag liner. ATTENTION CUSTOMERS : Does not work with AR Mags. ATTENTION CUSTOMERS: Compatible with AI magazines if used with the Ruger American AI Magazine Kit offered on theAccessories page. See full list of compatible short action calibers here: https://www.boydsgunstocks.com/ruger-american-ai-magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $225.25 $265.00
    Available: 
    1
    View Details
  • Remington 870 12ga Field D...

    Remington 870 12ga Field Design Forend Nutmeg Satin FInish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $30.55 $47.00
    Available: 
    1
    View Details
  • SAVAGE® 30 12 GA RIBBED FOR...

    SAVAGE® 30 12 GA RIBBED FOREND TRIGGER GUARD SAFETY & RIBBED FOREND Shady Camo Satin Finish Boyds Pad STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: N/A Top Tang length: N/A Bottom Tang width: 5/8" Bottom Tang length: 1 3/8" Stock height at receiver: 2" Stock width at receiver: 1 5/16" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/8 Magazine Tube Shoulder to Shoulder: 4 1/2 Over All Length of Part: 6 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $106.60 $164.00
    Available: 
    1
    View Details
  • Browning A-BOLT SHORT ACTIO...

    VT Browning A-BOLT SHORT ACTION, FACTORY BARREL CHANNEL Shady Camo Satin Finish Boyds Pad LOP 14 1/4" Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $213.20 $328.00
    Available: 
    1
    View Details
  • SAKO A7-M Long Action Detac...

    PH SAKO A7-M Long Action Detachable Magazine FBC Maroon Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 1/8" and Point B = 23/32" Center to Center of Action Screws: 7 41/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need your floor plate, takedown screws, and magazine. We will provide the recoil lug. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $143.00 $220.00
    Available: 
    1
    View Details
  • SAV 11 BOLT ACTION SHORT AC...

    FT SAV 11 BOLT ACTION SHORT ACTION, BLIND MAGAZINE, BULL BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.310" and Point B = .930"Center to Center of Action Screws: 4.415" Over All Length of Part: 31.50"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need take down screws, and trigger guard & screw from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • VT WIN 70 LA 2-PC FP FBC PO...

    VT WIN 70 LA 2-PC FP FBC POST 64 Green Paint Boyds Pad Barrel Dimensions: Point A = 1 7/32" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 2 piece hinged floor plate with standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $120.95 $186.00
    Available: 
    1
    View Details
  • REM 700 BDL LA FBC LH STK R...

    LH PH REM 700 BDL LA FBC LH STK RH ACT Claro XX Walnut High Gloss Boyds Pad Laser Panel ATTENTION CUSTOMERS: MILKY FINISH IN AREAS, DENT ON COMB, STAIN BY LASER UNDER FINISH. Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 LEFT Hand Long Action with hinged floor plate. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $297.70 $458.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LH ...

    LH FT SAV 220 SLUG GUN DBM LA LH STK RH ACT FBC Forest Camo High Gloss Kick-EEZ Pad Laser Symbol Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $184.60 $284.00
    Available: 
    1
    View Details
  • CVA SCOUT V2 FE

    CVA SCOUT V2 FE Nutmeg Satin Finish Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • Optima Stock

    Sterling Optima Stock Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 5/8" Top Tang Length: 1 13/16" Bottom Tang Width: 5/8" Bottom Tang Length: 15/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 11/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 1 3/16"Comes with Pachmayr recoil pad You will need your factory Through bolt. We will provide the Butt Plate, 2 Screws, and a 3/4" Blued Swivel Stud. ATTENTION: This stock is not compatible with the V2 Optima. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • REMINGTON® 1187 12 GA STK

    STERLING REMINGTON® 1187 12 GA STK Coyote Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Over All Length of Part: 14" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $68.25 $105.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LH STK RH...

    CLA BROWNING A-BOLT 2 LH STK RH ACT FBC Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions:Where Barrel meets the receiver/ Point A = 1.175" Barrel Dimensions: 9 inches in front of Point A/ Point B = .680 Center to Center of Action Screws: 7.2" Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 12 TBR BLIND MAG SA CNT...

    PRO VARMINT SAV 12 TBR BLIND MAG SA CNTF BBC LAM STK Applejack Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws:4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have been used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $141.70 $218.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAGA...

    SPIKE CAMP SAV 110 BBR DETACHABLE MAGAZINE LA FBC Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 29 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • WIN 70 SA 2-PC FP FBC POST 64

    PH WIN 70 SA 2-PC FP FBC POST 64 Walnut High Gloss Boyds Pad LOP 14" Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock will not work for the WSSM Caliber Rifles. Pre-1984 actions are based on the Long Action receiver. These stocks are designed for the Winchester Model 70 Short Action 2-Piece hinged floor plate model with a standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $154.05 $237.00
    Available: 
    1
    View Details
  • AR-15/M16 Mid-Length Handgu...

    AR-15/M16 Mid-Length Handguard Set Nutmeg Satin Finish Laser Panel INTERNATIONAL ORDERS FOR THIS PRODUCT WILL NOT BE PROCESSED. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Forend Shoulder to Shoulder: 8 5/16" Over All Length of Part: 8 21/32" ATTENTION CUSTOMERS: This forend is for the Mid-length compression style model. They are not designed to replace the free float handguards. These handguards will not fit the triangle front caps. It must have the front "cap" by the gas block and the delta ring. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $88.40 $136.00
    Available: 
    1
    View Details
  • M1 Garand Rear Hand Guard

    M1 Garand Rear Hand Guard Walnut Oil Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A Center to Center of Mounting Screws: N/A Over All Length of Part: 7 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: This Item Has An Authentic Military Oil Finish.No metal hardware is included. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $46.15 $71.00
    Available: 
    1
    View Details
  • BROWNING AB-3 DBM LA FBC

    HERT BROWNING AB-3 DBM LA FBC ClaroX Walnut High Gloss Finish Boyds Pad ATTENTION CUSTOMERS: SCRATCHES ON TOP OF GRIP. Barrel Dimensions: Point A = 1 5/32" and Point B = 45/64" Center to Center of Action Screws: 5 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and Bolt release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $201.50 $310.00
    Available: 
    1
    View Details
  • WIN 70 NFP SA FBC POST 64

    FT WIN 70 NFP SA FBC POST 64 Pepper Satin Finish Boyds Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS :This stock will not work for the WSSM caliber rifles. Pre-1984 actions are based on the Long Action Receiver. These stocks are designed for the Winchester Model 70 Short Action no floorplate model, with standard factory barrel contour. Due to changes made by Winchester to magazine sleeves for short action calibers. Magazine wells that are taller than 1.220 in rear and 1.030 in front will need to be modified to fit Boyds' stocks. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $187.20 $288.00
    Available: 
    1
    View Details
  • REM 700 ADL SA FBC

    HERT REM 700 ADL SA FBC ClaroXX Walnut High Gloss Finish Boyds Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 6 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlett for standard factory tapered barrel channel and is designed for the Remington 700 right hand short action with blind magazine, loads and unloads through top of action. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $257.40 $396.00
    Available: 
    1
    View Details
  • SAV 110 1ST GEN SA BLIND MA...

    SPIKE CAMP SAV 110 1ST GEN SA BLIND MAG FBC Blaze Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.028" and Point B = .715"Center to Center of Action Screws: 4.51" Over All Length of Part: 31.4375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Recoil to front action screw: 1.01" This inlet is for Savage 110 1st Generation Firearms. They are also referred to as "J" series or intermediate models. You will need the take down screws, trigger guard and mag box & spring from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.95 $147.00
    Available: 
    1
    View Details
  • CVA OPTIMA FE

    CVA OPTIMA FE Nutmeg Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 15/16" Receiver Edge to Center of Mounting Screw: 6 1/16" Over All Length of Part: 10 5/8" ATTENTION CUSTOMERS :You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • Browning A-5 12 Gauge Forend

    Browning A-5 12 Gauge Forend ClaroX Walnut Unfinished It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: N/A Recoil Spring cut out measures 7 9/16" from front receiver Over All Length of Part: 11 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. This item is not made for the new production A-5 which was introduced in 2012 All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.80 $192.00
    Available: 
    1
    View Details
  • Browning A-5 12 Gauge Mag ...

    Browning A-5 12 Gauge Mag Forend Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: N/A" Recoil Spring cut out measures 9 3/4 from front receiver " Over All Length of Part: 11 1/8 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. This item is not made for the new production A-5 which was introduced in 2012 All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • SAV B-MAG DBM SA BBC

    SPIKE CAMP SAV B-MAG DBM SA BBC Blackjack Satin Finish Boyds Pad Barrel Dimensions: Point A = 55/64" and Point B = 51/64" Center to Center of Action Screws: 6" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and Bolt Release is on the side of the receiver. ATTENTION CUSTOMERS : To assemble, you will need to use the two escutcheons and action screws from the original. The trigger guard/floor plate from original stock is not needed. We will provide you with a black plastic trigger guard. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS :To assemble you will need to use the two escutcheons and action screws from the original. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $124.95 $147.00
    Available: 
    1
    View Details
  • MOSS 500 12 GA STK

    MOSS 500 12 GA STK Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 5/16"Bottom Tang Length: 11/16"Stock Height at Receiver: 13/16"Stock Width at Receiver: 1 3/8"Overall Length of Stock: 12 3/4"Measurement of Receiver Mounting Bolt: 5 1/2"Comes with Pachmayr® Decelerator® recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • WIN 94 RANGER STK

    STRAIGHT GRIP STOCK WIN 94 RANGER STK Walnut Unfinished Boyds Pad ATTENTION CUSTOMERS: DENT ON TOP OF GRIP, WOOD FILL NEEDED AROUND REINFORCEMENT PIN. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $89.70 $138.00
    Available: 
    1
    View Details
  • SAV 111 SIDE RELEASE DBM LA...

    LH CLASSIC SAV 111 SIDE RELEASE DBM LA LH STH RH ACT FBC Pepper Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 21/64" and Point B = 23/32"Center to Center of Action Screws: 5 1/16”Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  This inlet is for the side release magazine version. You will need your trigger guard with screws and side release button.  All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • REMINGTON® 870 20 GA STK

    FIELD DESIGN REMINGTON® 870 20 GA STK Walnut Satin Finish Boyds Pad ATTENTION CUSTOMERS: You will need to purchase the 8 5/16" mounting bolt for wood stocks from the Accessories page, Part Number: A09168.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 9/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 5/16"Overall Length of Stock: 14"Measurement of Receiver Mounting Bolt - 8 5/16"Boyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the smaller frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Marlin 336 Barrel Band Forend

    Marlin 336 Barrel Band Forend Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $67.60 $104.00
    Available: 
    1
    View Details
  • Remington 870 12 Gauge Forend

    American Plainsman Remington 870 12 Gauge Forend F Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • Stevens 311 20 Gauge Splin...

    Stevens 311 20 Gauge Splinter Forend Walnut Satin Finish ATTENTION CUSTOMERS: SCRATCHES ON TIP, PRESENT IN PHOTO. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $56.55 $87.00
    Available: 
    1
    View Details
  • STEVENS 311 SEMI-BEAVERTAIL...

    STEVENS 311 SEMI-BEAVERTAIL FE 12 GA Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:This forend is designed for mounting hardware measuring 4 13/16" long with interior mounting screws. You will need to predrill for screws. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $56.55 $87.00
    Available: 
    1
    View Details
  • Remington 870 12 Gauge Stock

    American Plainsman Remington 870 12 Gauge Stock XX Walnut Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need to purchase the 8 5/16" mounting bolt for wood stocks from the Accessories page, Part Number: A09168.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 5/8"Stock Height at Receiver: 1 15/16"Stock Width at Receiver: 1 1/2"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmay Decelerator recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the larger frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $218.40 $336.00
    Available: 
    1
    View Details
  • SS Evolution Uninlet

    SS Evolution Uninlet Zombie High Gloss Finish Boyds Pad This stock has no inlet and can be milled to fit. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $121.55 $187.00
    Available: 
    1
    View Details
  • BROWNING AB-2 SSA 2-PC FP FBC

    CLA BROWNING AB-2 SSA 2-PC FP FBC Forest Camo Satin Finish Boyds Pad Pillar Bedding LOP 13" Barrel Dimensions: Point A = 1.176" and Point B = .842"Center to Center of Action Screws: 6.66"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the floor plate, take down screws, trigger guard and screw from your factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $146.90 $226.00
    Available: 
    1
    View Details
  • SAKO A1 SA 1-PC HINGED FP FBC

    PRO V SAKO A1 SA 1-PC HINGED FP FBC Pepper Satin Finish Pachmayr Pad Laser Panel LOP 13 1/2" ATTENTION CUSTOMERS: SCUFF ON COMB, PRESENT IN PHOTO. Barrel Dimensions: Point A = 1.044" and Point B = .710"Center to Center of Action Screws: 6.235" Over All Length of Part: 27"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, mag box and take down screws from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $172.25 $265.00
    Available: 
    1
    View Details
  • WIN 70 SA 2-PC FP FBC POST 64

    FT WIN 70 SA 2-PC FP FBC POST 64 Nutmeg High Gloss Finish Pachmayr Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $150.15 $231.00
    Available: 
    1
    View Details
  • SKS YUGO 59/66 HANDGUARD

    SKS YUGO 59/66 HANDGUARD Nutmeg Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Rear: 11/16" Barrel Channel at Front: 11/16" Receiver Edge to Center of Mounting Screw: N/A Over All Length of Part: 5 5/8" ATTENTION CUSTOMERS: This inlet was developed using a Yugo Model 59/66 with a blade style bayonet. It is our understanding that this inlet will work for most, if not all, SKS model variations with minor fitting. (e.g. The Albanian SKS will not fit.) Installation of the hand guard will require removal of the hand guard ferrule. You are urged to research the "how" to replace a hand guard prior to ordering. The removal of the ferrule is not a difficult task, but the ferrule can be easily damaged during the process if proper care is not exercised. Finding a replacement ferrule may prove to be a challenging task if it is damaged beyond repair during removal and or installation. You will need the ferrule and the ferrule pin from the original forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.00 $67.00
    Available: 
    1
    View Details
  • REMINGTON 870, AT-ONE, 12 G...

    REMINGTON® 870, AT-ONE, 12 GA FOREND Sky Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $39.65 $61.00
    Available: 
    1
    View Details
  • Browning BPS 12 Gauge Forend

    American Plainsman Browning BPS 12 Gauge Forend F Black Textured It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: 1 13/32" Magazine Tube Shoulder to Shoulder: 4 3/16 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: Early BPS actions will not work with these parts. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • Winchester 92 Buttstock

    Straight Grip Winchester 92 Buttstock Nutmeg Satin Finish Boyds Pad Laser Engravings It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.
    Price: 
    $96.20 $148.00
    Available: 
    1
    View Details
  • RUGER 77/22 FBC

    RIMFIRE HUNTER RUGER 77/22 Pepper Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 15/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/2"Width of Magazine Well: 1 5/16"Length of Magazine Well: 3 11/32" Over All Length of Part: 29" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks are designed for the Ruger 77 Bolt Action 22 Long Rifle. Early plastic stocks will require additional mounting hardware to use our stocks. Please contact Ruger or Brownells (800) 741-0015 for the metal trigger guard and clip assembly. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $150.15 $231.00
    Available: 
    1
    View Details
  • RUGER M77 MKII HAWKEYE SHOR...

    FT RUGER M77 MKII HAWKEYE SHORT ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL Coyote High Gloss Limbsaver Pad Angled Walnut Tip PIllar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks are designed for the Ruger 77 MKII rifles with safety located by the bolt handle on the right hand side of the action. If you have the rear mounted safety, please see the Ruger 77 tang safety models. Our inlet is designed for Standard Short Action calibers, Magnum calibers will require the magazine well to be opened up. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $249.60 $384.00
    Available: 
    1
    View Details
  • CZ 527 AMERICAN SHORT ACTIO...

    PLAT CZ 527 AMERICAN SHORT ACTION MAGAZINE FEED LEFT HAND STOCK LEFT HAND ACTION BULL BARREL CHANNEL Claro XX Walnut High Gloss Boyds Pad Barrel Dimensions: Point A = 0.99" and Point B = 0.885"Center to Center of Action Screws: 5.5" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $238.88 $367.50
    Available: 
    1
    View Details
  • SAVAGE 110 1ST GEN BLIND MA...

    SPIKE CAMP SAVAGE 110 1ST GEN BLIND MAG SHORT ACTION LEFT HAND STOCK LEFT HAND ACTION FBC Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.028" and Point B = .715"Center to Center of Action Screws: 4.51" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Recoil to front action screw: 1.01" This inlet is for Savage 110 1st Generation Firearms. They are also referred to as "J" series or intermediate models. You will need the take down screws, trigger guard and mag box & spring from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $115.60 $136.00
    Available: 
    1
    View Details
  • BROWNING A-5 16 GA FE

    BROWNING A-5 16 GA FE Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: N/A" Recoil Spring cut out measures 7 1/2" from front receiver Over All Length of Part: 10 1/2 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $64.03 $98.50
    Available: 
    1
    View Details
  • Winchester 92 Straight Gri...

    Winchester 92 Straight Grip Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundbale & nonreturnable.
    Price: 
    $62.08 $95.50
    Available: 
    1
    View Details
  • CVA OPTIMA BUTTSTOCK

    STERLING THUMBHOLE BUTTSTOCK CVA OPTIMA Sky Satin Finish Boyds Pad ATTENTION CUSTOMERS: You will need to purchase the 8 5/16" mounting bolt for wood stocks from the Accessories page, Part Number: A09168.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 9/16" Stock Height at Receiver: 1 15/16" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 14" Comes plastic buttplate If the customer is converting from a synthetic stock, they will need to order the REMINGTON 870 STOCK BOLT 8 1/4" mounting bolt from the Accessories page, part number A09168. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These stocks are designed for the larger frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.23 $106.50
    Available: 
    1
    View Details
  • Remington 11 Type 1 12 Ga Stk

    Remington 11 Type 1 12 Ga Stk Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 11/16" Top Tang Length: 13/16" Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 1/4"Stock Width at Receiver: 1 3/8Overall Length of Stock: 14 1/4"Measurement of Receiver Mounting Bolt: 3 1/2"Comes with Boyds plastic butt plate ATTENTION CUSTOMERS: You will need your factory Stock Receiver Bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Rossi Wizard .223 Stock

    Rossi Wizard .223 Stock Nutmeg Satin Finish Boyds Pad Barrel Channel Point at Rear: 1.114"Barrel Channel Point at Front: .822"Receiver Edge to Center of Mounting Screw:7.706"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10.625"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:Customer will need factory sling stud and mounting screw from factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • SAV 111 TBR DETACHABLE MAGA...

    CLA SAV 111 TBR DETACHABLE MAGAZINE LA LH STH LH ACT FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. ATTENTION CUSTOMERS:If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT II LH STOCK...

    HERT BROWNING A-BOLT II LH STOCK, RH ACTION, DETACHABLE BOX MAGAZINE, SHORT ACTION, FACTORY BARREL CHANNEL Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 43/64" Center to Center of Action Screws: 7 13/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need the takedown screws, trigger guard, floorplate, and rear takedown shim plate from your gun. Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II, or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO Versions are different than standard models. Call Browning Customer Service for more information. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • Savage® 67 12ga Stock

    Savage® 67 12ga Stock Walnut Satin Finish Boyds Pad Laser Panel ATTENTION CUSTOMERS: BLEMISH IN FINISH, PRESENT IN PHOTO. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A" Top Tang Length: N/A" Bottom Tang Width: 3/4" Bottom Tang Length: 5/16" Stock Height at Receiver: 2 7/16" Stock Width at Receiver: 1 11/32" Overall Length of Stock:13 1/4" Measurement of Boyds'Receiver Mounting Bolt: 5 1/2" BUTTPLATE ATTENTION CUSTOMERS:Known variations exist on this model you need to confirm supplied dimensions with your firearm . All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable and nonrefudnable.
    Price: 
    $112.45 $173.00
    Available: 
    1
    View Details
  • Marlin 336 Cap Style Forend

    Marlin 336 Cap Style Forend Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 15/16"Barrel Channel Point B: 13/16"Magazine Tube Width: 3/4"Magazine Tube Shoulder to Shoulder: 9 1/4"Over All Length of Part: 9 9/16"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:There are a few variations of Cap style forends that were made for this model. Please confirm dimensions prior to ordering. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $62.08 $95.50
    Available: 
    1
    View Details
  • Remington 870 20 Gauge Forend

    American Plainsman Remington 870 20 Gauge Forend Forest Camo Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: N/ABarrel Channel Point B: N/AMag Tube Width: 1 "Mag Tube Shoulder to Shoulder: 5 3/8 "Over All Length of Part: 9 "Boyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.The Remington 750 is interchangeable with the Remington 870.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • Browning A-5 12 Gauge Forend

    Browning A-5 12 Gauge Forend Royal Jacaranda Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: N/A Recoil Spring cut out measures 7 9/16" from front receiver Over All Length of Part: 11 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. This item is not made for the new production A-5 which was introduced in 2012 All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $50.38 $77.50
    Available: 
    1
    View Details
  • STEVENS 320 12 GA FOREND

    STEVENS 320 12 GA FOREND Walnut Satin Finish Barrel Channel Point at Rear: 1.254"Barrel Channel Point at Front: .99"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.14"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 5.07"Over All Length of Part: 9.115"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customer will need the forend cap nut from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $64.03 $98.50
    Available: 
    1
    View Details
  • Stevens® 311 12ga Stk & Spl...

    Stevens® 311 12ga Stk & Splinter Forend Walnut Satin Finish Boyds Pad FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 2 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 2 5/8" Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 9/16" BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: Please see Stevens 311 series stocks for possible crossover parts if your tang dimensions are not matching the supplied dimensions above. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $147.88 $227.50
    Available: 
    1
    View Details
  • WINCHESTER® 70, LH STOCK, R...

    SPIKE CAMP THUMBHOLE, WINCHESTER® 70, LH STOCK, RH ACTION, SHORT ACTION, 2-PC FLOOR PLATE, FACTORY BARREL CHANNEL Blaze Satin Finish Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock will not work for the WSSM Caliber Rifles. Pre-1984 actions are based on the Long Action receiver. These stocks are designed for the Winchester Model 70 Short Action 2-Piece hinged floor plate model with a standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $164.05 $193.00
    Available: 
    1
    View Details
  • RUGER 77 MKII HAWKEYE SHORT...

    SPIKE CAMP RUGER 77 MKII HAWKEYE SHORT ACTION, FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 3/4" Center to Center of Action Screws: 7 1/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks are designed for the Ruger 77 MKII rifles with safety located by the bolt handle on the right hand side of the action. If you have the rear mounted safety, please see the Ruger 77 tang safety models. Our inlet is designed for Standard Short Action calibers, Magnum calibers will require the magazine well to be opened up. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $198.05 $233.00
    Available: 
    1
    View Details
  • Savage 99 Takedown Forend &...

    Savage 99 Takedown Forend & Pistol Grip Buttstock Walnut Satin Finish Boyds Pad FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 5/16" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 6 5/8" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:There are 2 known variations of the takedown design forend. Please confirm dimensions when ordering. STOCK Top Tang width 15/16" Top Tang length 3" Bottom Tang width 15/16" Bottom Tang length 4 15/16" Stock height at receiver 2 3/16" Stock width at receiver 1 7/16THS" Total Length of stock 16" All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.88 $167.50
    Available: 
    1
    View Details
  • CZ 557 SPORTER Dbm La Fbc

    PLAT CZ 557 SPORTER Dbm La Fbc Walnut Satin Finish Limbsaver Pad Laser Panel LOP 14 1/4" Barrel Dimensions: Point A = 1 7/32" and Point B = 47/64" Center to Center of Action Screws: 7 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $179.08 $275.50
    Available: 
    1
    View Details
  • Marlin® 1895 Lever Act Butt...

    Marlin® 1895 Lever Act Buttstock Coyote Satin Finish Boyds Pad Laser Panel Top Tang Width: 0.75"Top Tang Length: 3.10"Bottom Tang Width: 0.56"Bottom Tang Length: 3.10"Stock Height at Receiver: 3.64"Stock Width at Receiver: 1.300"Overall Length of Stock: aprox. 13.25"Measurement of Receiver Mounting Bolt: N/ABUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $99.78 $153.50
    Available: 
    1
    View Details
  • Savage 30 (Trigger Guard Sa...

    Savage 30 (Trigger Guard Safety) Stock Walnut Unfinished Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: N/A Top Tang length: N/A Bottom Tang width: 5/8" Bottom Tang length: 1 3/8" Stock height at receiver: 2" Stock width at receiver: 1 5/16" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $78.98 $121.50
    Available: 
    1
    View Details
  • H&r® Single Shot Stk

    Sterling H&r® Single Shot Stk Blackjack Satin Finish None Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $61.75 $95.00
    Available: 
    1
    View Details
  • SAV 219 BUTTSTOCK

    SAV 219 BUTTSTOCK ClaroXX Walnut Satin Finish Boyds Pad Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. IF YOU HAVE THE EARLY MODEL V-SHAPED RECEIVER Top Tang width: 9/16" Top Tang length: 2 7/8" BottomTang width: 9/16" BottomTang length: 2 13/16" Stock height at receiver: 1 15/16" Stock width at receiver: 1 3/8" Overall Length of Stock: 15" Measurement of Receiver Mounting Bolt: 4 1/2" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:The Stevens/Savage Model 94 and 24 use the same receivers. The Model 24 stock has a monte carlo style comb, the Model 94 has a straight field style comb. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $208.65 $321.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    SPIKE CAMP SAV 110 BBR DETACHABLE MAG LA FBC Royal Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 29 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $162.78 $191.50
    Available: 
    1
    View Details
  • WIN 70 COYOTE SA 1-PC FLOOR...

    SPIKE CAMP WIN 70 COYOTE SA 1-PC FLOOR PLATE FBC Coyote High Gloss Boyds Pad Laser Symbol Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:This stock will not work for the WSSM caliber rifles. Pre 1984 actions are based on the long action receiver.These stocks are designed for the Short Action 1 piece hinged floor plate with standard factory tapered barrel. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $155.55 $183.00
    Available: 
    1
    View Details
  • SAV 10 TBR DETACHABLE MAGAZ...

    SPIKE CAMP SAV 10 TBR DETACHABLE MAGAZINE, SHORT ACTION, FACTORY BARREL CHANNEL Blackjack Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 29 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. ATTENTION CUSTOMERS:If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE SA PLASTIC MAG WELL from our Accessories page, Part No. A09161. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Short Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE SA PLASTIC MAG WELL from our Accessories page, Part No. A09161. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $114.33 $134.50
    Available: 
    1
    View Details
  • Remington 1100 12 Gauge Forend

    Remington 1100 12 Gauge Forend Pepper Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw/Magazine Tube Width: 1 9/16 " Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 11 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $77.35 $119.00
    Available: 
    1
    View Details
  • Browning Bar Type 2 Stock

    Browning Bar Type 2 Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/A"Top Tang Length: N/A"Bottom Tang Width: 5/8"Bottom Tang Length: 3/4"Stock Height at Receiver: 2"Stock Width at Receiver: 1 3/8"Overall Length of Stock:13 1/16"Measurement of Receiver Mounting Bolt: 5 3/4"BUTTPLATEAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $72.15 $111.00
    Available: 
    1
    View Details
368 products
Items per page: 40 80 120 View All
All finished Rapid Fire Gunstocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!