We are currently experiencing credit card processing technical difficulties; we are working on resolving them momentarily. We apologize for the inconvenience and thank you for choosing Boyds!

***Australian postal service has suspended delivery until further notice.***
For updates on International Mail Service Suspensions, please refer to
USPS.

Rapid Fire Products

:
351 products
Items per page: 40 80 120 View All
  • RUGER ACF PREDATOR AR MAG S...

    FT RUGER ACF PREDATOR AR MAG SA RH ACT FBC Forest Camo Satin Finish Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 1/64" and Point B = 3/4" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : We will provide the Ruger American AR magazine conversion floor plate, front and rear lugs, front and rear taked down screws, trigger guard with screw, magazine release catch, magazine release spring, magazine release button. Boyds Gunstocks recommends bedding the front and rear lugs.. ATTENTION: A relief cut to allow magazine release button clearance has been added. ATTENTION CUSTOMERS : You will need round specific magazines for the 7.62x39, 300 Blackout, 350 legend, and 6.5 grendel. Due to dimmensional differences they will not feed or stack properly in a standard 5.56 magazine. Calibers that are not compatible include: .308, 6.5 Creedmoor, and .243. Calibers that are compatible without round specific magazines: .223 and .204. ATTENTION: This stock is not compatible with the Ruger Mini 30 Magazines due to the steel mag liner. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $184.60 $284.00
    Available: 
    1
    View Details
  • MAUSER LARGE RING MILITARY ...

    HERT MAUSER LARGE RING MILITARY BARREL CHANNEL Forest Camo Satin Finish Limbsaver Pad LOP 14 1/4" Barrel Dimensions: Point A = 1 1/8" and Point B = 13/16" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:This stock is designed to accept the military stepped barrel minus sight sleeve. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All unfinished parts have been CNC inlet to Boyds' House Action. Final sanding and finish will be required. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • H&R Single Shot Stock

    Sterling H&R Single Shot Stock Sky Satin Finish Boyds Pad Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final!
    Price: 
    $66.95 $103.00
    Available: 
    1
    View Details
  • Ruger 22 Charger Pistol An...

    Ruger 22 Charger Pistol Any Barrel Channel Blaze Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = .920" Over All Length of Part: 15" ATTENTION CUSTOMERS:You will need the takedown screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • RUGER® 10/22® MAG .920 BC

    RIMFIRE HUNTER, RUGER® 10/22® MAG .920 BC Black Textured Paint Boyds Pad Barrel Dimensions: Point A = .920" and Point B = .920" Center to Center of Action Screws: N/A Over All Length of Part: 29" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Comes with brass mounting escutcheon. This stock is designed for the factory Ruger 10/22 Magnum Semi-Auto Action, measuring 6 3/4" long. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAVAGE AXIS DBM LA FBC

    SPIKE CAMP SAVAGE AXIS DBM LA FBC Sky Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/32"; and Point B = 23/32" ATTENTION CUSTOMERS: For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws. Length of Mag Box: 3 49/64" Center to Center of Action Screws: 4 25/32"; Over All Length of Part: 29 3/4" Comes with Boyds 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, front mag tab, rear mag tab, and recoil lug are included with the stock. ***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.*** It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds #39; House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $138.55 $163.00
    Available: 
    1
    View Details
  • SAVAGE 110 TBR, BLIND MAGAZ...

    SPIKE CAMP THUMBHOLE, SAVAGE 110 TBR, BLIND MAGAZINE, LONG ACTION, STAGGERED FEED, FACTORY BARREL CHANNEL Zombie Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Model Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.95 $147.00
    Available: 
    1
    View Details
  • Sako L61R Finnbear Magnum L...

    VT Sako L61R Finnbear Magnum Long Action FBC Nutmeg High Gloss Finish Limbsaver Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 25/32" Center to Center of Action Screws: 7 51/64" Over All Length of Part: 31 7/16" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your takedown screws, hinged floorplate, and mag well. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $148.85 $229.00
    Available: 
    1
    View Details
  • Win 70 Post 64 2-PC FP FBC

    Win 70 Spike Camp Post 64 2-PC FP FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 7/32" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 2 piece hinged floor plate with standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • MOSIN NAGANT MILITARY BARRE...

    SPIKE CAMP MOSIN NAGANT MILITARY BARREL CHANNEL Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet to accept the Mosin Nagant 91/30 Barreled action. Alternate models will work but minor fitting may be needed. These are Sporter stocks, they are not cut for barrel bands and are not intended to be used with the handguard. Our stocks are designed for the straight bolt. With fitting experience, they can be inlet for any bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • SAV 110 TBR BLIND MAG LONG ...

    SPIKE CAMP SAV 110 TBR BLIND MAG LONG ACTION, CENTER FEED, FACTORY BC Royal Jacaranda Satin Finish Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside of the stock when the barreled action is removed. If the magazine box stays attached to the action you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $171.70 $202.00
    Available: 
    1
    View Details
  • RUGER ACF PREDATOR SA DBM FBC

    SPIKE CAMP RUGER ACF PREDATOR SA DBM FBC Forest Camo Satin Finish Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 1/64" and Point B = 3/4" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.. ATTENTION: Not compatible with 7.62x39 caliber due to steel mag liner. Not compatible with AR mag. ATTENTION CUSTOMERS : Does not work with AR Mags. ATTENTION CUSTOMERS: Compatible with AI magazines if used with the Ruger American AI Magazine Kit offered on theAccessories page. See full list of compatible short action calibers here: https://www.boydsgunstocks.com/ruger-american-ai-magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $172.55 $203.00
    Available: 
    1
    View Details
  • WIN XPR LA FBC

    VT WIN XPR LA FBC Shady Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.153" and Point B = .72"Center to Center of Action Screws: 4.9" Over All Length of Part: 31 7/16"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the floorplate, rear takedown screw, front takedown screw, washers x2, slip spring, wood screw and clip from your factory stock. We will provide the recoil lug.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • TIKKA T1X DBM LH STH RH ACT...

    PH TIKKA T1X DBM LH STH RH ACT FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 7/8" and Point B = 3/4" Center to Center of Action Screws: 7" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. ATTENTION CUSTOMERS : Steel lug will be furnished with the stock. Ensure proper installation of the lug during assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • Browning X-Bolt Long Action...

    Prairie Hunter Browning X-Bolt Long Action Factory Barrel Channel ClaroXX Walnut High Gloss Finish Limbsaver Pad Laser Panel Black Grip Cap Black Polymer Tip Barrel Dimensions: Point A = 1 7/64" and Point B = 45/64" Center to Center of Action Screws: 5" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety is located on the tang and the Bolt Release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $354.90 $546.00
    Available: 
    1
    View Details
  • REMINGTON 783, LONG ACTION,...

    SPIKE CAMP THUMBHOLE, REMINGTON 783, LONG ACTION, DETACHABLE BOX MAGAZINE, FACTORY BARREL CHANNEL Boyds Pad Barrel Dimensions: Point A = 1 5/64" and Point B = 3/4"Center to Center of Action Screws: 7 31/32"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.Safety and Bolt Release are located on the side of the receiver.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • CVA SCOUT V2 FE & STERLING ...

    CVA SCOUT V2 FE & STERLING BUTTSTOCK Pepper Satin Finish Boyds Pad FOREND Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 11/16" Top Tang Length: 13/16" Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 1/4"Stock Width at Receiver: 1 3/8"Overall Length of Stock: 13 7/8"Measurement of Receiver Mounting Bolt: 3 5/8"Comes with Boyds Pad. ATTENTION CUSTOMERS: You will need your factory Stock Receiver Bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $99.45 $153.00
    Available: 
    1
    View Details
  • MARLIN® 336 STRAIGHT GRIP STK

    MARLIN® 336 STRAIGHT GRIP STK Sky Satin Finish Boyds Pad Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $66.95 $103.00
    Available: 
    1
    View Details
  • STEVENS® 67E 12GA STOCK

    STEVENS® 67E 12GA STOCK Black Textured Paint Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A" Top Tang Length: N/A" Bottom Tang Width: 3/4" Bottom Tang Length: 5/16" Stock Height at Receiver: 2 7/16" Stock Width at Receiver: 1 11/32" Overall Length of Stock:13 1/4" Measurement of Boyds'Receiver Mounting Bolt: 5 1/2" BUTTPLATE ATTENTION CUSTOMERS:Known variations exist on this model you need to confirm supplied dimensions with your firearm . All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • Marlin 336 Stock

    Straight Grip Marlin 336 Stock Walnut Satin Finish Boyds Pad Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • REM 870 12 GA FOREND

    REMINGTON 870 12 GA FOREND ZOMBIE HUNTER SATIN FINISH It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $42.90 $66.00
    Available: 
    1
    View Details
  • Cva Scout V2 Fe

    Cva Scout V2 Fe SKY SATIN Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $54.60 $84.00
    Available: 
    1
    View Details
  • Remington® 1187 12 Ga Stock

    American Plainsman Remington® 1187 12 Ga Stock Nutmeg Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 9/16"Bottom Tang Length: 9/16"Stock Height at Receiver: 2"Stock Width at Receiver: 1 7/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 10 1/2"Comes with Pachmayr recoil pad All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $89.05 $137.00
    Available: 
    1
    View Details
  • WEATHERBY MARK V LA 1-PC FL...

    LH FT WEATHERBY MARK V LA 1-PC FLOOR PLATE LH STK FBC Coyote Gloss Finish Limbsaver Pad Laser Panel Angled Walnut Tip LOP 13 1/4" Barrel Dimensions: Point A = 1.140" and Point B = 0.680"Center to Center of Action Screws: 8.105" Over All Length of Part: 32"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:You will need the floorplate and action screws from your original stock. ATTENTION CUSTOMERS: These stocks are designed for rifles with a 6 lug bolt, and are not compatible with rifles with a 9 lug bolt system. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $226.85 $349.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    CLA SAV 110 BBR DETACHABLE MAG LA FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 110 TBR STAGGERED FEED ...

    HERT SAV 110 TBR STAGGERED FEED LA LH STH LH ACT FBC ClaroX Walnut High Gloss White line spacer kit Angled Black Polymer Tip Black Grip Cap Kick-EEZ Pad Laser Panel Pillar Bedding Barrel Channel Dimensions: Point A - 1 5/16" Point B - 3/4" Center to Center Action Screws: 5 1/16 Comes with Boyds 1/2" Recoil Pad. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4" and 1 1/2" respectively. These are sold separately on our Accessories page, bottom, left hand side of the website under Products.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $367.90 $566.00
    Available: 
    1
    View Details
  • SAV 111 SIDE RELEASE DBM LA...

    HERT SAV 111 SIDE RELEASE DBM LA FBC Shady Camo Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 21/64" and Point B = 23/32"Center to Center of Action Screws: 5 1/16”Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  This inlet is for the side release magazine version. You will need your trigger guard with screws and side release button.  All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & noneturnable.
    Price: 
    $144.30 $222.00
    Available: 
    1
    View Details
  • SAVAGE AXIS DBM LONG ACTION...

    PRO VARMINT SAVAGE AXIS DBM LONG ACTION FBC Coyote High Gloss Finish Boyds Pad ATTENTION CUSTOMERS: FLAW IN FINISH ON FOREND, FINISH DRIPPED. Barrel Dimensions: Point A = 1 11/32" and Point B = 23/32"ATTENTION CUSTOMERS: For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws.Length of Mag Box: 3 49/64" approximately Center to Center of Action Screws: 4 25/32"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, front mag tab, rear mag tab, and recoil lug are included with the stock. .***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.*** It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $152.10 $234.00
    Available: 
    1
    View Details
  • TIKKA T3 LITE DBM LH STH LH...

    PLAT TIKKA T3 LITE DBM LH STH LH ACT FBC Pepper Satin Finish Limbsaver Pad Laser Panel Black Grip Cap Black Polymer Tip Pillar Bedding Barrel Dimensions: Point A = 1 9/64" and Point B = 45/64" Center to Center of Action Screws: 7" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. ATTENTION CUSTOMERS : Steel lug will be furnished with the stock. Ensure proper installation of the lug during assembly. ATTENTION CUSTOMERS: This stock is compatible with the T3x model. ATTENTION CUSTOMERS: This stock is NOT compatible with the T3x Compact Tactical. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $244.40 $376.00
    Available: 
    1
    View Details
  • MARLIN 39A .22 STOCK

    MARLIN 39A .22 STOCK Pepper Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: .535" Top Tang Length: 3.1" Bottom Tang Width: .525" Bottom Tang Length: 3.1" Stock Height at Receiver: 1.36" Stock Width at Receiver: 1.25" Overall Length of Stock: 12.9" Measurement of Receiver Mounting Bolt: .215" X1.68" BUTTPLATE ATTENTION CUSTOMERS:You will need the take down screw from the original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $66.95 $103.00
    Available: 
    1
    View Details
  • Savage 94 .410 Gauge Sprin...

    Savage 94 .410 Gauge Spring Clip Single Forend & Stock Black Textured Boyds Pad FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/32" Barrel Channel Point B: 11/16" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A Over All Length of Part: 9" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: No mounting hardware is included. This forend is for internal mounted springclip. Variations of mounting hardware exist, fitting of your hardware may be needed. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. IF YOU HAVE THE EARLY MODEL V-SHAPED RECEIVER Top Tang width: 9/16" Top Tang length: 2 7/8" BottomTang width: 9/16" BottomTang length: 2 13/16" Stock height at receiver: 1 15/16" Stock width at receiver: 1 3/8" Overall Length of Stock: 15" Measurement of Receiver Mounting Bolt: 4 1/2" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:The Stevens/Savage Model 94 and 24 use the same receivers. The Model 24 stock has a monte carlo style comb, the Model 94 has a straight field style comb. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $86.45 $133.00
    Available: 
    1
    View Details
  • Marlin 39a .22 Stock

    Marlin 39a .22 Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: .535" Top Tang Length: 3.1" Bottom Tang Width: .525" Bottom Tang Length: 3.1" Stock Height at Receiver: 1.36" Stock Width at Receiver: 1.25" Overall Length of Stock: 12.9" Measurement of Receiver Mounting Bolt: .215" X1.68" BUTTPLATE ATTENTION CUSTOMERS:You will need the take down screw from the original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Stevens 315 12 Gauge Stock

    Stevens 315 12 Gauge Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 2 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 2 5/8" Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 9/16" BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: Please see Stevens 311 series stocks for possible crossover parts if your tang dimensions are not matching the supplied dimensions above. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • AR-15/M16 Smooth Grip

    AR-15/M16 Smooth Grip Nutmeg Satin Finish Over All Length of Part: 4 1/4" Will fit all Carbine, Mid, and Rifle length AR-15's. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $30.55 $47.00
    Available: 
    1
    View Details
  • TCA ENCORE® RIFLE FOREND

    TCA® ENCORE® RIFLE FOREND Walnut Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws: 5" Over All Length of Part: 11" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:Many variations in mounting screws exist please confirm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • Browning BPS 12 Gauge Forend

    American Plainsman Browning BPS 12 Gauge Forend Pepper Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: 1 13/32" Magazine Tube Shoulder to Shoulder: 4 3/16 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: Early BPS actions will not work with these parts. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • Winchester 93 12 Gauge 3-H...

    Winchester 93 12 Gauge 3-Hole Grooved Forend Black Textured It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw: 1 1/2" Magazine Tube Shoulder to Shoulder: 6 1/8" Over All Length of Part: 6 3/4" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Non-refundable & non-returnable.
    Price: 
    $41.00 $64.00
    Available: 
    1
    View Details
  • Rem 700 BDL LA RH STK LH AC...

    FT Rem 700 BDL LA RH STK LH ACT FBC Forest Camo Satin Finish Kick-EEZ Pad Laser Panel Angled Walnut Tip Pillar Bedding Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 LEFT Hand Long Action with hinged floor plate. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $238.23 $261.95
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2/MEDALLION...

    SPIKE CAMP BROWNING A-BOLT 2/MEDALLION A-BOLT 2 SHORT ACTION 2-PC FP FBC Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions:Where Barrel meets the receiver/ Point A = 1.175" Barrel Dimensions: 9 inches in front of Point A/ Point B = .680 Center to Center of Action Screws: 7.2" Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • M1 Carbine Handguard & Stock

    M1 Carbine Handguard & Stock Walnut Oil Finished STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel: 39/64" Tube Barrel Receiver/action is approximately 6 19/64" long by 1 7/32" wide. Over All Length of Part: 28 1/4" ATTENTION CUSTOMERS: This requires all metal components and sling assembly from the original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable and nonreturnable.
    Price: 
    $154.05 $237.00
    Available: 
    1
    View Details
  • RUGER MINI 14 LEFT HAND STO...

    PLAT RUGER MINI 14 LEFT HAND STOCK, RIGHT HAND ACTION Walnut Unfinished Boyds Pad Barrel Dimensions: Point A = 29/32" and Point B = 5/8" Over All Length of Part: 29 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need the trigger assembly, magazine, forend liner, and Cap assembly. Our inlet is designed not to use the stock reinforcement or side stock reinforcement screws. There will not be swivel studs installed on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $200.85 $309.00
    Available: 
    1
    View Details
  • WIN 70 SUPER SHORT ACTION P...

    HERT WIN 70 SUPER SHORT ACTION POST 64 Blaze Satin Finish Boyds Pad Barrel Dimensions: where barrel meets receiver/Point A=1.138" Barrel Dimensions: 9 inches in front of Point A/Point B= .668" Center to Center of Action Screws: 6.35" Attention Customers: Winchester Super Short Magnum-Blind Mag-NO FLOOR PLATE Attention Customers: It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • KIMBER 84M SA FBC

    PH KIMBER 84M SA FBC ClaroXX Walnut High Gloss Finish White line spacer kit Black Grip Cap Angled Black Polymer Tip Laser Panel Limbsaver Pad Pillar Bedding LOP 14 1/4" Comes in either Forest Camo, Nutmeg or Pepper laminates. NO CHOICE.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64"Center to Center of Action Screws: 6 9/16"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $403.00 $620.00
    Available: 
    1
    View Details
  • SAV 93E MKII RH STK LEFT HA...

    BARRACUDA SAV 93E MKII RIGHT HAND STOCK LEFT HAND ACTION FBC Nutmeg Satin Finish Boyds Pad You will receive Forest Camo, Nutmeg, Pepper, Royal, or Royal Jacaranda stock. No choice of laminate color.Barrel Dimensions: Point A = 13/16" and Point B = N/A Center to Center of Action Screws: 3 11/16" Over All Length of Part: 27" w/pad Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models. Do not over tighten. All plastic stocks, and some laminate and hardwood stocks will require you to purchase a different trigger guard and floor plate. You can purchase them on the Accessories page, bottom left-hand corner. Some stocks may also require different action screws which are available through DiProductsInc: PN 13020. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • REM 700 ADL SHORT ACTION FBC

    FT HOWA 1500 MINI DBM STD #2 BC Royal Satin Finish Kick-EEZ Pad Laser Symbol Angled Walnut Tip ATTENTION CUSTOMERS: CHIP OUT OF TIP OF FOREND ON TOP, OUTER EDGE OF INLET. Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 6 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlett for standard factory tapered barrel channel and is designed for the Remington 700 right hand short action with blind magazine, loads and unloads through top of action. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $146.90 $226.00
    Available: 
    1
    View Details
  • Winchester 37 12 Gauge Expo...

    Winchester 37 12 Gauge Exposed Plate Forend & Stock Walnut Satin Finish Boyds Pad FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/8" Barrel Channel Point B: 1" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 9 3/4" Over All Width at Receiver: 1 3/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:Please note: This is the exposed plate 37 forend. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1/2" Top Tang Length: 2 3/4" Bottom Tang Width: 1/2" Bottom Tang Length: " Stock Height at Receiver: 2 17/32" Stock Width at Receiver: 1 49/64" Overall Length of Stock: Approximately 15" Measurement of Receiver Mounting Bolt: Approximately 4 1/2" BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $105.30 $162.00
    Available: 
    1
    View Details
  • BROWNING AB-2 SSA 2-PC FLOO...

    FT BROWNING AB-2 SSA 2-PC FLOOR PLATE FBC Pepper Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1.176" and Point B = .842" Center to Center of Action Screws: 6.66" Over All Length of Part: 31.5" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : You will need the floor plate, take down screws, trigger guard and screw from your factory stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • STEVENS® 820 12GA STOCK

    STEVENS® 820 12GA STOCK Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A" Top Tang Length: N/A" Bottom Tang Width: 3/4" Bottom Tang Length: 5/16" Stock Height at Receiver: 2 7/16" Stock Width at Receiver: 1 11/32" Overall Length of Stock:13 1/4" Measurement of Boyds'Receiver Mounting Bolt: 5 1/2" BUTTPLATE ATTENTION CUSTOMERS:Known variations exist on this model you need to confirm supplied dimensions with your firearm . All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • REMINGTON® 742 CAP STYLE FE

    REMINGTON® 742 CAP STYLE FE Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 1 5/32"Barrel Channel Point B: 25/32"Receiver Face to Shoulder of Mounting Cap: 10 21/64"Over All Length of Part/Shoulder to Shoulder: 10 3/4"ATTENTION CUSTOMERS: You will need the liner, front mounting cap, and screw from the original forend. This forend requires a metal liner with front mounting screw sleeve for installation; which is not included. The metal liner from the original forend may be used if it is not damaged, deformed or modified in any way. The removal of metal liner from the original forend will require original forend to be split into 2 pieces, making it unusable once completed. Before installing forend liner ensure all surfaces are free from dried adhesive debris. Rubbing alcohol, or other cleaning agent that will not hinder new adhesive performance, should be used to clean the metal surfaces. Slight fitting may be required to properly fit you specific liner. Make sure the forend retains its intended shape when the liner is installed. Dry fit the metal liner into forend, and onto gun, to ensure proper fit and function. Ensure all inletted surfaces of forend are completely free from debris before applying adhesive. Generously, apply Acraglas adhesive to all inletted surfaces of forend that the liner will make contact with. Also, apply adhesive to metal liner if necessary to ensure proper function of the gun. Once installed make sure to let adhesive dry according to manufactures specifications before use.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • REMINGTON® 760 GAMEMASTER F...

    REMINGTON® 760 GAMEMASTER FOREND Zombie Hunter Satin Finish Barrel Channel Point at Rear: 1.237"Barrel Channel Point at Front: 0.789"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 0.875"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 3.985"Over All Length of Part: 7.809"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • BROWNING BAR MKII FOREND

    FT REM 700 ADL SHORT ACTION FBC Nutmeg Satin Finish Boyds Pad Pillar Bedding ATTENTION CUSTOMERS: CHIP OUT OF TIP OF FOREND ON TOP, OUTER EDGE OF INLET. Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 6 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlett for standard factory tapered barrel channel and is designed for the Remington 700 right hand short action with blind magazine, loads and unloads through top of action. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • Browning Bar Safari Forend

    Browning Bar Safari Forend ClaroX Walnut Satin Finish Barrel Channel Point at Rear: 1.275"Barrel Channel Point at Front: 0.750"Receiver Edge to Center of Mounting Screw: 9.669"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 13.00"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the original swivel stud and mounting screw from the factory forend. We will provide the bushing and spacer where the swivel stud mounts to the gun.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $117.00 $180.00
    Available: 
    1
    View Details
  • Ithaca 37 Stock

    Ithaca 37 Stock Pepper Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 5/8" Stock Height at Receiver: 2 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 13/16" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate Most 12ga, 16ga, and 20 GAUGE Ithaca 37 actions will work with this stock. THIS STOCK WILL REQUIRE FITTING FOR THE FEATHERWEIGHT FRAMED MODEL 37. PLEASE COMPARE MEASUREMENTS SUPPLIED WITH THOSE OF YOUR FIREARM. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $52.65 $81.00
    Available: 
    1
    View Details
  • SAV 110 1ST GENERATION SA B...

    CLA SAV 110 1ST GENERATION SA BLIND MAG FBC Pepper Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1.028" and Point B = .715"Center to Center of Action Screws: 4.51" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Recoil to front action screw: 1.01" This inlet is for Savage 110 1st Generation Firearms. They are also referred to as "J" series or intermediate models. You will need the take down screws, trigger guard and mag box & spring from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    HERT SAV 110 BBR DETACHABLE MAG LA LH STH LH ACT FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAKO L61R FINNBEAR MAGNUM

    HERT SAKO L61R FINNBEAR MAGNUM ClaroX Walnut High Gloss Finish Boyds Pad Laser Panel ATTENTION: SCRATCH ON GRIP Barrel Dimensions: Point A = 1 11/64" and Point B = 25/32" Center to Center of Action Screws: 7 51/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your takedown screws, hinged floorplate, and mag well. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $241.80 $372.00
    Available: 
    1
    View Details
  • BROWNING BBR LONG ACTION FBC

    SPIKE CAMP BROWNING BBR LONG ACTION FBC Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 11/64" and Point B = 47/64"Center to Center of Action Screws: 8 19/64�Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, and mag will. You will also need to remove he middle floor plate screw insert and reinstall in your Boyds upgrade stock or purchase the proper wood screw. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • SAV 110 TBR, BLIND MAGAZINE...

    SPIKE CAMP SAV 110 TBR, BLIND MAGAZINE, LONG ACTION, CENTER FIRE, LH ACTION, FACTORY BARREL CHANNEL Pepper High Gloss Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside of the stock when the barreled action is removed. If the magazine box stays attached to the action you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $132.60 $156.00
    Available: 
    1
    View Details
  • REM 788 LONG RECEIVER, LEFT...

    HERT REM 788 LONG RECEIVER, LEFT HAND STOCK, RIGHT HAND ACTION, FBC Forest Camo Satin Finish Boyds Pad ATTENTION: DENT ON COMB, PRESENT IN PHOTO. Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16"Center to Center of Action Screws: 7"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: This stock is designed for the Remington 788 Long Action.Long action Calibers- 243 Win, 6mm Rem, 7mm-08 Rem, 308 Win.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    SPIKE CAMP SAV 110 BBR DETACHABLE MAG LA LH ACT FBC Pepper Satin Finish Boyds Pad ATTENTION: DEEP SCRATCH ON SIDE OF FOREND NEAR GRIP. CIRCLED ON STOCK. Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • CZ 452 2E AMERICAN SA MAGAZ...

    RVT CZ 452 2E AMERICAN SA MAGAZINE FEED FBC Zombie Hunter Satin Finish Boyds Pad Barrel Dimensions: Point A = .99" and Point B = .712"Center to Center of Action Screws: 3.235"Over All Length of Part: 31.25"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, trigger plate and clip from the factory stock. ATTENTION CUSTOMERS: Not compatible with ZKM model variations.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • WINCHESTER® 92 STK

    WINCHESTER® 92 STK Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 15/16" Top Tang Length: 3 15/16" Bottom Tang Width: 5/8" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 7/16" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/4" Measurement of Receiver Mounting Bolt: N/A Comes with Boyds' plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Remington 11 Type 2 12 Gaug...

    Remington 11 Type 2 12 Gauge Stock Walnut Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 5/8" Bottom Tang Width: 5/8" Bottom Tang Length: 3 1/4" Stock Height at Receiver: 1 5/8" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 13 1/2" Come with Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • Mossberg 500 12 Gauge Bant...

    American Plainsman Mossberg 500 12 Gauge Bantam Forend F Blaze Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 Magazine Tube Shoulder to Shoulder: 5 3/4 Over All Length of Part: 9 1/4 ATTENTION CUSTOMERS: On your action slide tube, measure from top of threads to bottom of collar that holds the action bars. This measurement is critical! This forend is for the 6 1/2" action slide. If your action slide measures 7 5/8", see our American Plainsman Forend Shape! NOTE: Since 2006, some newer models shotguns with synthetic forearms may not use an action slide tube at all; rather, the pump handle will have two integral bars pinned into the handle itself. If you have one of these, you cannot use a forearm that was designed to go over an action slide tube without first buying the correct length tube and action slide tube nut. You may contact Havlin Sales at 636-937-6401 to obtain proper components. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • Browning A-5 12 Gauge Foren...

    Browning A-5 12 Gauge Forend Walnut Satin Finisht It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: N/A Recoil Spring cut out measures 7 9/16" from front receiver Over All Length of Part: 11 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These forends do not come with forward Cap retaining spring. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55 $107.00
    Available: 
    1
    View Details
  • Marlin 336 Barrel Band Forend

    Marlin 336 Barrel Band Forend Green Paint It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $52.65 $81.00
    Available: 
    1
    View Details
  • Marlin 336 Extended Cap Sty...

    Marlin 336 Extended Cap Style Forend Pepper Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 15/16"Barrel Channel Point B: 12/16"Magazine Tube Width: 11/16"Magazine Tube Shoulder to Shoulder: 9 5/8"Over All Length of Part: 9 3/4"Exposed material when installed: 9 5/8"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:There are a few variations of Cap style forends that were made for this model. Please confirm dimensions prior to ordering.ATTENTION CUSTOMERS: This is the same as the existing 336 only with an additional .325 in length to match the currently produced rifle. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • CVA Optima V2 Stock

    CVA Optima V2 Stock Zombie Hunter Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 11/16" Top Tang Length: 13/16" Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 1/4"Stock Width at Receiver: 1 3/8Overall Length of Stock: 14 1/4"Measurement of Receiver Mounting Bolt: 3 1/2"Comes with Boyds plastic butt plate ATTENTION CUSTOMERS: You will need your factory Stock Receiver Bolt. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $65.00 $100.00
    Available: 
    1
    View Details
  • TC COMPASS LA DBM FBC

    SPIKE CAMP TC COMPASS LA DBM FBC Blackjack High Gloss Finish Boyds Pad Barrel Dimensions: Point A = 1.11" and Point B = 0.68"Center to Center of Action Screws: 7.60"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the front takedown screw from your factory stock. Boyds will provide the recoil lug, rear magazine ledge, front magazine latching tab, front washer, trigger guard, trigger guard screw and rear takedown screw. Long Action Calibers, 270 Win, 300 Win mag,, 30-06 Spfld, 7mm Rem Mag. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $112.45 $173.00
    Available: 
    1
    View Details
  • Mossberg Intl 817 Short Act...

    Pro Varmint Mossberg Intl 817 Short Action Factory Barrel Channel Black Textured Boyds Pad Barrel Dimensions: Point A = 0.787" and Point B = 0.787"Center to Center of Action Screws: 5.575" Over All Length of Part: 30.375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the 2-take down screws and clip from your original stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • CZ 527 AMERICAN DBM SA FBC

    CLA CZ 527 AMERICAN DBM SA FBC Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 63/64" and Point B = 45/64" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION: THIS STOCK IS NOT COMPATIBLE WITH THE CZ 527 M CARBINE MODEL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $133.90 $206.00
    Available: 
    1
    View Details
  • SAV 110 TBR DETACHABLE MAG ...

    HERT SAV 110 TBR DETACHABLE MAG LA FBC Walnut Unfinished Boyd Pad LOP 14" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. ATTENTION CUSTOMERS:If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $143.65 $221.00
    Available: 
    1
    View Details
  • BENJAMIN MARAUDER AIRGUN

    VT BENJAMIN MARAUDER AIRGUN Royal Jacaranda Satin Finish Boyds Pad LOP 13 1/4" Barrel Dimensions: Point A = 1.25" and Point B = 1.25" Over All Length of Part: 31.716"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the trigger guard, and take down screws from your factory stock. We will provide Escutcheon. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $133.90 $206.00
    Available: 
    1
    View Details
  • MOSS 4X4 DBM SA FBC

    FT MOSS 4X4 DBM SA FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 23/32" Center to Center of Action Screws: 4 23/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety and Bolt Release are on the side of the receiver. ATTENTION CUSTOMERS: OUR STOCK WILL ONLY WORK FOR THE PLASTIC/SYNTHETIC TO WOOD CONVERSION. You will need to use the plastic mag liner from the original factory stock and the front action screw (.930"). Each stock will be supplied with the rear action screw (1.5"), "FLAT FRONT" trigger guard, and wood screw (1"). It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • AR-15/M16 Rifle Length Hand...

    Ar-15/M16 Rifle Length Handguard Claro X Walnut Satin Finish INTERNATIONAL ORDERS FOR THIS PRODUCT WILL NOT BE PROCESSED. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Forend Shoulder to Shoulder: 11 21/32" Over All Length of Part: 11 15/16" ATTENTION CUSTOMERS: This forend is for the AR rifle compression style model. They are not designed to replace the free float handguards. These handguards will not fit the triangle front caps. It must have the front "cap" by the gas block and the delta ring. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable. pan>
    Price: 
    $121.55 $187.00
    Available: 
    1
    View Details
  • WIN 93 12 Gauge Stock

    Winchester 93 12 Gauge Stock Walnut Boyds Pad N/A All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $78.65 $121.00
    Available: 
    1
    View Details
  • RUGER AMERICAN RANCH LONG A...

    SPIKE CAMP RUGER AMERICAN RANCH LONG ACTION DBM FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Does not work with AI or AR Mags. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. r> All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.10 $146.00
    Available: 
    1
    View Details
  • Win 70 La 1-pc Fp Fbc Post 64

    Spike Camp Win 70 La 1-pc Fp Fbc Post 64 Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 1 piece floor plate design with standard factory tapered barrel. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $124.95 $147.00
    Available: 
    1
    View Details
  • KIMBER 84M SA FBC

    SPIKE CAMP KIMBER 84M SA FBC Shady Camo Satin Finish Boyds Pad Laser Symbol It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64" Center to Center of Action Screws: 6 9/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $110.50 $170.00
    Available: 
    1
    View Details
  • Ruger American Centerfire A...

    PH RUGER AMERICAN LA FBC Shady Camo High Gloss Finish Pachmayr Pad Walnut Grip Cap Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Not compatible with AI or AR Magazines. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $203.15 $239.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LONG ACTI...

    PLATINUM BROWNING A-BOLT 2 LONG ACTION, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL Nutmeg Satin Finish Pachmayr Pad Laser Panel Adjustable Comb Walnut Grip Cap Angled Walnut Tip Cap Barrel Dimensions: Point A = 1 11/64" and Point B = 49/64" Center to Center of Action Screws: 7 59/64" Over All Length of Part: 31/1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $245.38 $377.50
    Available: 
    1
    View Details
  • STEVENS 325 SA FBC

    PLAT STEVENS 325 SA FBC Walnut Satin Finish Boyds Pad N/A All Rapid Fire sales are final! Nonrefundable and nonreturnabe.
    Price: 
    $135.85 $209.00
    Available: 
    1
    View Details
  • Sears 53 SA 2-PC FP FBC

    FT Sears 53 SA 2-PC FP FBC Pepper High Gloss Limbsaver Pad Laser Panel Pillar Bedding LOP 14 3/4" Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $226.20 $348.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA RH ...

    HERT SAV 220 SLUG GUN DBM LA RH ACTION FBC Claro XX High Gloss White line spacer kit Boyds Pad Walnut Grip Cap ATTENTION CUSTOMERS: SCUFF MARK ON COMB, DENTS ON LEFT SIDE OF GRIP WHERE THE COMB STARTS. Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $293.15 $451.00
    Available: 
    1
    View Details
  • Ruger 10/22 Mag .920 BC

    Barracuda Ruger 10/22 Mag .920 BC Sky High Gloss Boyds Pad Barrel Dimensions: Point A = .920" and Point B = N/A Center to Center of Action Screws: N/A Over All Length of Part: 28 1/4" w/pad Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Comes with brass mounting escutcheon. This stock is designed for the factory Ruger 10/22 Magnum Semi-Auto Action, measuring 6 3/4" long. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $139.10 $214.00
    Available: 
    1
    View Details
  • BROWNING BAR TYPE 1 FOREND

    BROWNING BAR TYPE 1 FOREND Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $64.03 $98.50
    Available: 
    1
    View Details
  • Marlin 1895Gs Cap Style For...

    Marlin 1895Gs Cap Style Forend & Straight Grip Stock Forest Camo Satin Finish Pachmayr Pad Laser Panel FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Rear: 31/64" Barrel Channel at Front: 29/32" Magazine Tube Width: 25/32" Magazine Tube Shoulder to Shoulder: 9 5/8" Over All Length of Part: 9 57/64" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK Length of Pull - 13 3/4"Top Tang width -5/8"Top Tang length -3 1/16"BottomTang width -5/8"BottomTang length -3 1/16"Stock height at receiver -1 11/16"Stock width at receiver -11/2"Fitting of trigger spring may be required.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $159.90 $246.00
    Available: 
    1
    View Details
  • REMINGTON® 870 20 GA FE

    AP REMINGTON® 870 20 GA FE Walnut Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: N/ABarrel Channel Point B: N/AMag Tube Width: 1 "Mag Tube Shoulder to Shoulder: 5 3/8 "Over All Length of Part: 9 "Boyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.The Remington 750 is interchangeable with the Remington 870.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • MOSSBERG® 930 12 GA FOREND

    MOSSBERG® 930 12 GA FOREND Sky Satin Finish Barrel Channel Point at Rear: 1.115"Barrel Channel Point at Front: 0.875"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.05"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 1.105"Over All Length of Part: 11.125"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine cap from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $54.60 $84.00
    Available: 
    1
    View Details
  • Rem 760 Takedown Forend

    Remington 760 Takedown Forend Forest Camo Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Width for Receiver Clearance : 1 3/8" Magazine Tube Shoulder to Shoulder: 6 " Over All Length of Part: 8 1/4 " ATTENTION CUSTOMERS:This part is not designed for the early 760 pump with tube nut retainer. This a Boyds' design forend, we do not offer original replacements. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • BROWNING® BPS 10 GA FOREND

    BROWNING® BPS 10 GA FOREND Coyote Satin Finish Barrel Channel Point at Rear: 1.058"Barrel Channel Point at Front: 1.13"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.14"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 5.818"Over All Length of Part: 9.17"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the magazine cap and forend retention nut from the factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • Browning BPS 12 Gauge Stock

    American Plainsman Browning BPS 12 Gauge Stock F Coyote Satin Finish Pachmayr Pad Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 13/16" Stock Width at Receiver - 1 13/16" Overall Length of the Stock- 12 13/16" Measurement of Receiver Mounting Bolt - 5 1/4" Pachmayr Decelerator Recoil Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $101.40 $156.00
    Available: 
    1
    View Details
  • Remington 870 20 Gauge Stock

    American Plainsman Remington 870 20 Gauge Stock Forest Camo Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 9/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 5/16"Overall Length of Stock: 14"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmayr Decelerator recoil padBoyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the smaller frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $89.05 $137.00
    Available: 
    1
    View Details
  • Weatherby Sa-08 12 Gauge Bu...

    Weatherby Sa-08 12 Gauge Buttstock Walnut Satin Finish Pachmayr Pad Bottom Tang Width: 33/64" Bottom Tang Length: 3/8" Stock Height at Receiver: 2" Stock Width at Receiver: 1 1/2" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 1 1/2" It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $104.00 $160.00
    Available: 
    1
    View Details
  • Cva Optima Stock

    Sterling Cva Optima Stock Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 5/8" Top Tang Length: 1 13/16" Bottom Tang Width: 5/8" Bottom Tang Length: 15/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 11/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 1 3/16"Comes with Pachmayr recoil pad You will need your factory Through bolt. We will provide the Butt Plate, 2 Screws, and a 3/4" Blued Swivel Stud. ATTENTION: This stock is not compatible with the V2 Optima. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $165.75 $255.00
    Available: 
    1
    View Details
  • SAV 16 TBR BLIND MAGAZINE, ...

    FT SAV 16 TBR BLIND MAGAZINE, SHORT ACTION STAGGERED FEED, FACTORY BARREL CHANNEL Royal Jacaranda Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. When you disassemble your action the magazine box will be attached to the receiver. If the magazine box stays inside of the stock when the barreled action is removed, you may need the Center Feed Model or CTF version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $141.70 $218.00
    Available: 
    1
    View Details
  • CLA SAV AXIS DBM LA LH STH ...

    LH CLA SAV AXIS DBM LA LH STH LH ACT FBC Nutmeg Satin Finish Limbsaver Pad Walnut Grip Cap Barrel Dimensions: Point A = 1 1/32" and Point B = 23/32" ATTENTION CUSTOMERS: For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws. Length of Mag Box: 3 49/64" approximately Center to Center of Action Screws: 4 25/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, front mag tab, rear mag tab, and recoil lug are included with the stock. ***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.*** It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $193.05 $297.00
    Available: 
    1
    View Details
  • SAV 212 12 GA LA FBC

    PLAT SAV 212 12 GA LA FBC Nutmeg High Gloss Finish Kick-Eez Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 11/64" and Point B = 31/32"Center to Center of Action Screws: 5 1/16"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, mag box, and trigger guard with screw. ATTENTION CUSTOMERS:ATTENTION CUSTOMERS : This is for the older style floor plate that measures 5.7875. The gun is chambered for a 12 GAUGE shotgun shell. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $169.65 $261.00
    Available: 
    1
    View Details
  • SAVAGE 10 TBR, BLIND MAGAZI...

    SPIKE CAMP THUMBHOLE, SAVAGE 10 TBR, BLIND MAGAZINE, SHORT ACTION, STAGGERED FEED, FACTORY BARREL CHANNEL, FINISHED Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • SPIKE CAMP, BROWNING X-BOLT...

    BROWNING X-BOLT, SPIKE CAMP, LONG ACTION, FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 7/64" and Point B = 45/64" Center to Center of Action Screws: 5" Over All Length of Part: 29 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety is located on the tang and the Bolt Release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $108.80 $128.00
    Available: 
    1
    View Details
  • Remington 870 12 Gauge Forend

    American Plainsman Remington 870 12 Gauge Forend Shady Camo Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.35 $79.00
    Available: 
    1
    View Details
  • Kimber 84m SA FBC

    PH Kimber 84m SA FBC Pepper Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64" Center to Center of Action Screws: 6 9/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • BROWNING X-BOLT SA LH STK L...

    LH PH BROWNING X-BOLT SA LH STK LH ACT FBC Pepper Satin Finish Limbsaver Pad LOP 13 1/4" Barrel Dimensions: Point A = 1 7/64" and Point B = 45/64" Center to Center of Action Screws: 4 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. The Safety is located on the tang and the Bolt Release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $130.65 $201.00
    Available: 
    1
    View Details
  • WIN 70 SA 2-PC FP FBC POST 64

    CLA WIN 70 SA 2-PC FP FBC POST 64 ClaroXX Walnut Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $279.50 $430.00
    Available: 
    1
    View Details
  • RUGER AMERICAN CENTERFIRE SA

    SPIKE CAMP RUGER AMERICAN CENTERFIRE SA Pepper Satin Finish Boyds Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 29 3/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks will provide the required bedding compound and you must bed the front and rear lugs. ATTENTION: Not compatible with 7.62x39 caliber due to steel mag liner. ATTENTION CUSTOMERS : Does not work with AR Mags. ATTENTION CUSTOMERS: Compatible with AI magazines if used with the Ruger American AI Magazine Kit offered on theAccessories page. See full list of compatible short action calibers here: https://www.boydsgunstocks.com/ruger-american-ai-magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $225.25 $265.00
    Available: 
    1
    View Details
  • Remington 870 20 Gauge Stock

    American Plainsman Remington 870 20 Gauge Stock Nutmeg Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 9/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 5/16"Overall Length of Stock: 14"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmayr Decelerator recoil padBoyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the smaller frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $89.05 $137.00
    Available: 
    1
    View Details
  • Remington 870 12ga Field D...

    Remington 870 12ga Field Design Forend Nutmeg Satin FInish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $30.55 $47.00
    Available: 
    1
    View Details
  • SAVAGE® 30 12 GA RIBBED FOR...

    SAVAGE® 30 12 GA RIBBED FOREND TRIGGER GUARD SAFETY & RIBBED FOREND Shady Camo Satin Finish Boyds Pad STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: N/A Top Tang length: N/A Bottom Tang width: 5/8" Bottom Tang length: 1 3/8" Stock height at receiver: 2" Stock width at receiver: 1 5/16" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/8 Magazine Tube Shoulder to Shoulder: 4 1/2 Over All Length of Part: 6 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $106.60 $164.00
    Available: 
    1
    View Details
  • Browning A-BOLT SHORT ACTIO...

    VT Browning A-BOLT SHORT ACTION, FACTORY BARREL CHANNEL Shady Camo Satin Finish Boyds Pad LOP 14 1/4" Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $213.20 $328.00
    Available: 
    1
    View Details
  • SAKO A7-M Long Action Detac...

    PH SAKO A7-M Long Action Detachable Magazine FBC Maroon Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 1/8" and Point B = 23/32" Center to Center of Action Screws: 7 41/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need your floor plate, takedown screws, and magazine. We will provide the recoil lug. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $143.00 $220.00
    Available: 
    1
    View Details
  • SAV 11 BOLT ACTION SHORT AC...

    FT SAV 11 BOLT ACTION SHORT ACTION, BLIND MAGAZINE, BULL BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.310" and Point B = .930"Center to Center of Action Screws: 4.415" Over All Length of Part: 31.50"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need take down screws, and trigger guard & screw from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • VT WIN 70 LA 2-PC FP FBC PO...

    VT WIN 70 LA 2-PC FP FBC POST 64 Green Paint Boyds Pad Barrel Dimensions: Point A = 1 7/32" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 2 piece hinged floor plate with standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $120.95 $186.00
    Available: 
    1
    View Details
  • SAVAGE 10 BBR DBM SA BBC

    HERT SAVAGE 10 BBR DBM SA BBC Royal Satin Finish Pachmayr Pad Laser Panel Barrel Dimensions: Point A = 1 1/8" Point B = 1 1/16" Center to Center Action Screws: 4 7/16" Overall Length of Part: N/A Comes with Boyds 1/2" Recoil Pad. ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws and Detachable Box Mag. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE SA PLASTIC MAG WELL from our Accessories page, Part No. A09161. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.
    Price: 
    $183.30 $282.00
    Available: 
    1
    View Details
  • REM 700 BDL LA FBC LH STK R...

    LH PH REM 700 BDL LA FBC LH STK RH ACT Claro XX Walnut High Gloss Boyds Pad Laser Panel ATTENTION CUSTOMERS: MILKY FINISH IN AREAS, DENT ON COMB, STAIN BY LASER UNDER FINISH. Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 LEFT Hand Long Action with hinged floor plate. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $297.70 $458.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LH ...

    LH FT SAV 220 SLUG GUN DBM LA LH STK RH ACT FBC Forest Camo High Gloss Kick-EEZ Pad Laser Symbol Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $184.60 $284.00
    Available: 
    1
    View Details
  • CVA SCOUT V2 FE

    CVA SCOUT V2 FE Nutmeg Satin Finish Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.55 $67.00
    Available: 
    1
    View Details
  • Optima Stock

    Sterling Optima Stock Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: 5/8" Top Tang Length: 1 13/16" Bottom Tang Width: 5/8" Bottom Tang Length: 15/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 11/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 1 3/16"Comes with Pachmayr recoil pad You will need your factory Through bolt. We will provide the Butt Plate, 2 Screws, and a 3/4" Blued Swivel Stud. ATTENTION: This stock is not compatible with the V2 Optima. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.90 $86.00
    Available: 
    1
    View Details
  • REMINGTON® 1187 12 GA STK

    STERLING REMINGTON® 1187 12 GA STK Coyote Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Over All Length of Part: 14" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $68.25 $105.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LH STK RH...

    CLA BROWNING A-BOLT 2 LH STK RH ACT FBC Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions:Where Barrel meets the receiver/ Point A = 1.175" Barrel Dimensions: 9 inches in front of Point A/ Point B = .680 Center to Center of Action Screws: 7.2" Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $109.85 $169.00
    Available: 
    1
    View Details
  • SAV 12 TBR BLIND MAG SA CNT...

    PRO VARMINT SAV 12 TBR BLIND MAG SA CNTF BBC LAM STK Applejack Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws:4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately on our Accessories page. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have been used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $141.70 $218.00
    Available: 
    1
    View Details
351 products
Items per page: 40 80 120 View All
All finished Rapid Fire Gunstocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!