Accessories

Zombie Hunter Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Machined aluminum anodized black trigger guard for WINCHESTER 72 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

This walking stick is 47 1/2" in height and in Royal laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Pepper laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Nutmeg laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Coyote laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Blackjack laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Applejack laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

CNC machined, aluminum with black anodization Thompson/Center Venture Trigger Guard.

Machined black anodized Tikka T3 Lite Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3 & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

Machined black anodized Tikka T3 Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3, T3x, & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

6 Piece Nickel Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

6 Piece Blued Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

Quick release rifle sling swivel - 1 1/4 inch. To attach sling swivel, unscrew locking screw, press in the locking screw, when the locking lever clears the retaining pin, move the locking lever out of the way, keeping the locking screw pressed in. Attach the swivel and return the locking lever over the retaining pin and release the locking screw. Tighten the locking screw to secure the swivel to the rifle swivel base. Stainless Steel; blued finish

These screws are required for most plastic to wood stock conversions. These are Nickel screws. This screw set is to be used for any Savage Stainless model 10, 11, 12, 14,16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

These screws are required for most plastic to wood stock conversions. This screw set is to be used for any Stevens 200 or Savage black or blued model 10, 11, 12, 14, 16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

Machined aluminum anodized black trigger guard for Savage B-Mag models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined Black Anodized aluminum Savage short or long action Trigger Guard for bottom bolt release models only. (Not compatible with Savage Axis or Edge Rifles.) Please note will require spring and flat plate from original trigger guard.

Aluminum mag catch without pillar for Savage Axis.

Metal Ruger American Trigger Guard with Mag Catch for short actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.

Metal Ruger American Trigger Guard with Mag Catch for Long Actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows other Ruger American rifles to be converted to allow the use of the Ruger AI-Style magazines with compatible calibers when they are assembled to a Boyds stock. Not compatible with 7.62x39 calibers. See compatible calibers here: Ruger American Magazine Styles

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows Ruger American rifles to use of the Ruger Mini 30 magazines for the 7.62x39 caliber when they are assembled to a Boyds stock. ATTENTION CUSTOMERS: Critical to start both screws before tightening to final torque (30 in LBS). Learn more about this kit here: Ruger American 7.62x39 Mini 30 Magazine Kit

ROTATING AT-ONE & AGILITY BUTT ASSEMBLY Attaches to the existing butt plate of the At-One and Agility adjustable butt plate assembly. It will provide rotation on the recoil pad to allow the user to position the pad to fit their shooting style. To install: Remove the butt pad from the adjustable butt plate assembly, attach using the mounting screws and reattach the butt pad. Increases LOP by approximately 3/4" when installed. Will work in conjunction with the vertically adjustable assembly. Technical Specification: 5.7 degrees per rotation index, 40 degrees per side (right and left) with 80 degrees of full index range. Engraved index identifier marks. Aluminum housing, stainless dowel pins, black phosphate steel snap ring. Black anodized coating. The threaded knob is hard anodized and Teflon impregnated to prevent gulling of the threads. Operates without tools.

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Neon green/Black

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •American Walnut

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Royal Blue/Black