Accessories

Metal Ruger American Trigger Guard with Mag Catch for short actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.

Aluminum mag catch without pillar for Savage Axis.

Aluminum mag catch with pillar for Savage Axis.

These screws are required for most plastic to wood stock conversions. These are Nickel screws. This screw set is to be used for any Savage Stainless model 10, 11, 12, 14,16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

These screws are required for most plastic to wood stock conversions. This screw set is to be used for any Stevens 200 or Savage black or blued model 10, 11, 12, 14, 16, 110, 111, 112, 114 or 116 blind magazine action. Uses standard 5/32" allen wrench driver. Screws measure 1 1/4" and 1 1/2" respectively.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

Compatible with Savage Axis, Savage 10-16 and Savage 110-116 Models with a Top Bolt Release. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Hole to hole centers measure 2.898" (nominal). Not compatible with aftermarket trigger assemblies without modifications.

Machined Black Anodized aluminum Savage short or long action Trigger Guard for bottom bolt release models only. (Not compatible with Savage Axis or Edge Rifles.) Please note will require spring and flat plate from original trigger guard.

Machined aluminum anodized black trigger guard for Savage B-Mag models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

This is a metal replacement trigger guard for Marlin centerfire models. Compatible models include: X7, X7c, X7s, X7vh, Xy7, Xl7, Xs7, Xs7vh.

Machined aluminum anodized black trigger guard for REMINGTON 770 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

CNC machined, aluminum with black anodization Thompson/Center Venture Trigger Guard.

This is a metal replacement trigger guard for Marlin rimfire models. Compatible models include: 900 Series, 917, 925, 980, XT Series, XT-17, XT-22, & XT 22 Mag.

Machined aluminum anodized black trigger guard for WINCHESTER 72 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for Marlin 25 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for GLENFIELD 25 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Machined aluminum anodized black trigger guard for REMINGTON 710 models. Compatible with Boyds Gunstocks only, not a replacement for factory gunstocks.

Replacement trigger guard for Mossberg 100 ATR short and long action rifles.

6 Piece Nickel Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

Quick release rifle sling swivel - 1 1/4 inch. To attach sling swivel, unscrew locking screw, press in the locking screw, when the locking lever clears the retaining pin, move the locking lever out of the way, keeping the locking screw pressed in. Attach the swivel and return the locking lever over the retaining pin and release the locking screw. Tighten the locking screw to secure the swivel to the rifle swivel base. Stainless Steel; blued finish

6 Piece Blued Set Includes: •2- 3/4" Machine Screw Studs •1- 3/4" Wood Screw Stud •1- 1/2" Wood Screw Stud •2- Stop Nuts

Easy-to-use 1.5 oz. syringe gives pin-point application in hard-to-reach areas and prevents over-application. These syringes have a long tip with an extra-wide opening at the bottom. Each syringe comes completely assembled with a top quality barrel, plunger, and oversized cap. Allows for easy cleanup or disposal when project is complete.

Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This Kit is black. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

Pro-Bed 2000 is a Matrix Stabilized Microsphere Composite derived from a 2 part epoxy. Approximately 85% by volume of the mixed epoxy is made up of high quality additives that tremendously improve the qualities of epoxy. These additives,(microspheres, carbon fibers and Fiberglas™) eliminate shrinkage and adds to the compressive and flexural strength as well as improve the adhesive capabilities. This kit is brown. Each kit contains: 1 oz jar resin; 1 oz jar of curing agent; 1small jar of mold release; 1 application brush; mixing sticks; and modeling clay and complete instructions.

Designed to directly fit into Boyds® Deadset™ Stock ONLY. Will need to purchase a stock with this part or fit into existing Boyds® Deadset™ Stock. Currently only offered in Armor Black. Boyds® will provide (1) 1/4-28 x 3/4 Screw and (1) 1/4-28 x 1 - 1/4 Screw". Tighten Deadset™ screws to 30" LBS. Overall length of part 11 1/3".

This walking stick is 47 1/2" in height and in Applejack laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Royal laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Blackjack laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Coyote laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Nutmeg laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

This walking stick is 47 1/2" in height and in Pepper laminate. Wrist strap installed for ease of use with a rubber pad at the end of the walking stick.

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Maroon/Black

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Brown/Black

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Brown/Natural

Only select, quality hardwoods go into these laminate wood blanks. Each veneer is graded to eliminate defects and dyed under high pressure to give it color uniformity. They are then coated with high-strength, virtually waterproof industrial glue resin. The beautiful colors are created by alternating colored layers and bonding them together under intense heat and pressure. This extensive process produces a laminate blank long known for exceptional strength, stability and unconditional use in any environment. •Blaze Orange/Black