Due to routine maintenance, our production facility will be shut down from 6/29-7/3. You may experience a delay in shipping with your orders. We will resume our normal production on 7/6/2020.
Sales and Customer Service will be open 6/29-7/1.

Rapid Fire Products

:
372 products
Items per page: 25 50 75 View All
  • Ruger ACF Predator DBM SA FBC

    Classic Ruger ACF Predator DBM SA FBC Pepper Satin Finish Boyds Pad Laser Panel Adjustable Comb LOP 14 1/4" Pillar Bedding Barrel Dimensions: Point A = 1 1/64" and Point B = 3/4" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs.. ATTENTION: Not compatible with 7.62x39 caliber due to steel mag liner. Not compatiable with AR mag.ATTENTION CUSTOMERS : Does not work with AR Mags. ATTENTION CUSTOMERS: Compatible with AI magazines if used with the Ruger American AI Magazine Kit offered on theAccessories page. See full list of compatible short action calibers here: https://www.boydsgunstocks.com/ruger-american-ai-magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $219.70
    Available: 
    1
    View Details
  • Ruger M77 MKII LA LH STK LH...

    FT Ruger M77 MKII LH STK LH ACT FBC Forest Camo High Gloss Boyds Pad Laser Symbol Walnut Angled Tip Barrel Dimensions: Point A = 1 3/16" and Point B = 3/4" Center to Center of Action Screws: 7 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks are designed for the Ruger 77 MKII rifles with safety located by the bolt handle on the LEFT hand side of the action. If you have the rear mounted safety, please see the Ruger 77 tang safety models. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $150.54
    Available: 
    2
    View Details
  • BRNO ZKK-600 FBC

    CLA BRNO ZKK-600 FBC Maroon/Pepper Satin Finish Pachmayr Pad Pillar Bedding Laser Panel Barrel Dimensions: Point A = 1 7/64" and Point B = 3/4" Center to Center of Action Screws: 7 53/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your takedown screws, mag liner, follower, and floorplate for your original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $200.53
    Available: 
    1
    View Details
  • REM 700 LA DETACHABLE MAGAZ...

    FT REM 700 LA DETACHABLE MAGAZINE FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet for the standard factory tapered barrel. These stocks are designed for the Remington 700 right hand long action receiver with factory supplied detachable box magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $98.80
    Available: 
    1
    View Details
  • SAV AXIS DBM LA FBC

    VT SAV AXIS DBM LA FBC Nutmeg High Gloss Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 11/32" and Point B = 23/32" ATTENTION CUSTOMERS : For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws. Length of Mag Box: 3 49/64" approximately Center to Center of Action Screws: 4 25/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, and recoil lug are included with the stock. ***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.*** It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $161.20
    Available: 
    1
    View Details
  • MARLIN® 336 BARREL BAND FE

    MARLIN® 336 BARREL BAND FE SKY SATIN It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $46.80
    Available: 
    1
    View Details
  • REMINGTON® 870 12 GA FE

    AP REMINGTON® 870 12 GA FE FOREST CAMO SATIN FINISH It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 " Magazine Tube Shoulder to Shoulder: 5 3/8 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $39.00
    Available: 
    1
    View Details
  • SAVAGE® 99 SPRING CLIP FE

    SAVAGE® 99 SPRING CLIP FOREND WALNUT SATIN FINISH It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/16" Barrel Channel Point B: 23/32" Receiver Edge to Center of Mounting Screw: 6 3/4" Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 9 1/2" Over All Width at Receiver: 1 7/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:There are 2 known variations of the spring clip design, please confirm dimensions prior to ordering. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $55.25
    Available: 
    1
    View Details
  • Marlin® 336 Barrel Band Fe

    Marlin® 336 Barrel Band Fe SKY SATIN FINISH It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $46.80
    Available: 
    1
    View Details
  • MOSSBERG® 500 12 GA FOREND

    MOSSBERG® 500 12 GA FOREND ZOMBIE SATIN FINISH Barrel Channel Point at Rear: 1.87"Barrel Channel Point at Front: 0.81"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 1.2"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 6.738"Over All Length of Part: 9.154"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Customers will need the forend cap nut from the factory forend.THIS WILL NOT FIT WITH THE BARREL HEAT SHIELD.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $49.73
    Available: 
    1
    View Details
  • REMINGTON® 1100 12 GA FE

    REMINGTON® 1100 12 GA FE SKY SATIN It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw/Magazine Tube Width: 1 9/16 " Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 11 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $48.75
    Available: 
    1
    View Details
  • Rossi 92 44 Octagon Barrel ...

    Rossi 92 44 Octagon Barrel Capstyle Fe XX WALNUT SATIN FINISH Barrel Channel Point at Rear: 0.805"Barrel Channel Point at Front: 0.805"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 0.68"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 10.78"Over All Length of Part: 10.78"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $84.15
    Available: 
    1
    View Details
  • Cva Scout V2 Fe SKY SATIN

    Cva Scout V2 Fe SKY SATIN Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. BR>All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $48.75
    Available: 
    1
    View Details
  • MARLIN® 336 BARREL BAND FE

    MARLIN® 336 BARREL BAND FE WALNUT SATIN FINISH LASER PANEL It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $95.55
    Available: 
    1
    View Details
  • SAVAGE® 99 PISTOL GRIP STOCK

    SAVAGE® 99 PISTOL GRIP STOCK Walnut Satin Finish Top Tang width 15/16" Top Tang length 3" Bottom Tang width 15/16" Bottom Tang length 4 15/16" Stock height at receiver 2 3/16" Stock width at receiver 1 7/16THS" Total Length of stock 16" All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $72.80
    Available: 
    1
    View Details
  • SAVAGE® 30 (TRIGGER GUARD S...

    SAVAGE® 30 (TRIGGER GUARD SAFETY) STOCK Walnut satin It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang width: N/A Top Tang length: N/A Bottom Tang width: 5/8" Bottom Tang length: 1 3/8" Stock height at receiver: 2" Stock width at receiver: 1 5/16" Overall Length of Stock: 13 3/4" Measurement of Receiver Mounting Bolt: 5 1/4" Comes with Boyds' black plastic buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $69.55
    Available: 
    1
    View Details
  • AP REMINGTON® 1100 12 GA STK

    AP REMINGTON® 1100 12 GA STK Sky Satin Finish Pachmayr Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 9/16"Bottom Tang Length: 9/16"Stock Height at Receiver: 2"Stock Width at Receiver: 1 7/16"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt: 10 1/2"Comes with Pachmayr recoil pad All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $89.05
    Available: 
    1
    View Details
  • WINCHESTER® 94 POST 64 BARR...

    WINCHESTER® 94 POST 64 BARREL BAND FE & STOCK Forest Camo Satin Finish FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Receiver: Approximately 1" Barrel Channel at End: 11/16" Receiver Edge to Center of Mounting Screw: 6 7/8" Shoulder to Shoulder: 6 11/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 1 1/32" Top Tang Length: 3 7/8" Bottom Tang Width: 9/16" Bottom Tang Length: 3 15/16" Stock Height at Receiver: 1 5/16" Stock Width at Receiver: 1 3/8" Overall Length of Stock:13 1/4" BOYDS' PLASTIC BUTTPLATE All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:Due to variations with this model minor fitting of the receiver may be needed even with these finished parts. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $87.10
    Available: 
    1
    View Details
  • MARLIN® 1895 LEVER ACT BUTT...

    MARLIN® 1895 LEVER ACT BUTTSTOCK Blk Txt Paint STOCK Top Tang Width: 0.75"Top Tang Length: 3.10"Bottom Tang Width: 0.56"Bottom Tang Length: 3.10"Stock Height at Receiver: 3.64"Stock Width at Receiver: 1.300"Overall Length of Stock: aprox. 13.25"Measurement of Receiver Mounting Bolt: N/ABUTTPLATEIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. FOREND MARLIN® 336, CAP STYLE FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 15/16"Barrel Channel Point B: 13/16"Magazine Tube Width: 3/4"Magazine Tube Shoulder to Shoulder: 9 1/4"Over All Length of Part: 9 9/16"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.ATTENTION CUSTOMERS:There are a few variations of Cap style forends that were made for this model. Please confirm dimensions prior to ordering. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $79.95
    Available: 
    1
    View Details
  • SPRINGFIELD® M1A HG & STOCK

    SPRINGFIELD® M1A HG & STOCK Walnut Oil Finish STOCK Stocks are designed to accept Springfield M1 A .308 receivers other manufacturers may work but only with modifactions to our stocks. Norinco actions have variation in gas port location and receiver. Fitting of action is required.ATTENTION CUSTOMERS:  Stocks are cut for stock liner but liner is not included. No mounting hardware is included with this stock. FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 13 1/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS:Barrel band is not included. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $136.50
    Available: 
    1
    View Details
  • Springfield 5100 TYPE 2 16g...

    Springfield 5100 TYPE 2 16ga Stk & Splinter FE X Walnut Satin Finish FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Over All Length of Part: 7 1/2" Over All width at receiver: 1 1/2" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS:Final fitting of spring clip assembly and drilling for mounting screws maybe required due to the many variations of mounting hardware used on this model. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 5/8" Top Tang Length: 3 1/4" Bottom Tang Width: 5/8" Bottom Tang Length: 3 7/8" Stock Height at Receiver: 1 7/8" Stock Width at Receiver: 1 5/8" Boyds' Black Plastic Buttplate All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $109.80
    Available: 
    1
    View Details
  • SAVAGE 110 BBR DETACHABLE M...

    CLA SAVAGE 110 BBR DETACHABLE MAG LA LH STK LH ACT FBC Walnut Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $121.55
    Available: 
    1
    View Details
  • KIMBER 84M SA FBC

    HERT KIMBER 84M SA FBC Walnut Satin Finish Laser Panel Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 3/64" and Point B = 43/64" Center to Center of Action Screws: 6 9/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:You will need the mag box, shell follower and spring, takedown screws, and trigger guard with trigger screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $157.30
    Available: 
    1
    View Details
  • SAV 11 BBR DETACHABLE MAG S...

    PLAT SAV 11 BBR DETACHABLE MAG SA FBC Royal Satin Finish Boyds Pad LOP 13" Attention: Bubbles in finish on under side of forend Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $79.95
    Available: 
    1
    View Details
  • SAV 10 TBR DETACHABLE MAG S...

    FT SAV 10 TBR DETACHABLE MAG SA FBC Coyote High Gloss Laser Panel Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Short Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $161.53
    Available: 
    1
    View Details
  • Win XPR SA FBC

    Classic Win XPR SA FBC X Maple Satin Finish Boyds Pad Black Polymer Grip Cap Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32"Center to Center of Action Screws: 4 11/32"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the Floorplate, rear takedown screw, front takedown screw, washer x2, mag spring, wood screw, magazine from your gun.The mag spring from factory stock will will need to be screwed in before assembly. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $152.10
    Available: 
    1
    View Details
  • Sav 16 TBR DETACHABLE MAGAZ...

    FT Sav 16 TBR DETACHABLE MAGAZINE, SHORT ACTION, LH STOCK, LH ACTION, FACTORY BARREL CHANNEL Pepper High Gloss Kick-Eez Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Short Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $152.35
    Available: 
    1
    View Details
  • REM 700 ADL LA FBC

    PLAT REM 700 ADL LA FBC Circassian Walnut XX High Gloss Walnut Grip Cap White Line Spacer Kit Boyds Pad Attention: Scratch on side of forend. Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 Right Hand Long Action with blind magazine, loads and unloads through top of action. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $288.65
    Available: 
    1
    View Details
  • Rem 700 ADL SA LH STH RH AC...

    HERT Rem 700 ADL SA LH STH RH ACT FBC Pepper Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8.475" Over All Length of Part: 31 1/2" Comes with Boyds 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is for Mauser Large Ring Guns that utilize the shorter commercial floor plate, see dimensions to determine application. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $134.55
    Available: 
    1
    View Details
  • Sako L16r Finnbear Magnum L...

    PH Sako L16r Finnbear Magnum LA LH ACT FBC Forest Camo Satin Finish Pachmayr Pad Laser Panel Adjustable Comb Black Polymer Grip Cap Barrel Dimensions: Point A = 1 11/64" and Point B = 25/32"Center to Center of Action Screws: 7 51/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need your takedown screws, hinged floorplate, and mag well.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $193.05
    Available: 
    1
    View Details
  • Sav 11 TBR BLIND MAGAZINE, ...

    FT Sav 11 TBR BLIND MAGAZINE, SHORT ACTION, CENTER FEED, LH STOCK, LH ACTION, FACTORY BARREL CHANNEL Shady Camo Satin Finish Boyds Pad Angled Walnut Tip LOP 13" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside the stock when the barreled action is removed. If the magazine box stays attached to the action, you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $132.02
    Available: 
    1
    View Details
  • HOWA 1500 MINI DBM STD #2 BC

    PLAT HOWA 1500 MINI DBM STD #2 BC XX Maple Satin Finish Boyds Pad Walnut Grip Cap Angled Walnut Tip Attention: Deep dent on comb. Barrel Dimensions: Point A = 1.095" and Point B = .653" Center to Center of Action Screws: 6.765" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $179.97
    Available: 
    1
    View Details
  • Sav 16 TBR BLIND MAGAZINE, ...

    Hert Sav 16 TBR BLIND MAGAZINE, SHORT ACTION, STAGGERED FEED, FACTORY BARREL CHANNEL Walnut Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $121.55
    Available: 
    1
    View Details
  • REM 700 LA 1PC FP BBC

    PLAT REM 700 LA 1PC FP BBC Walnut Unfinished Pachmayr Pad LOP 13 1/2" Attention: Black stain on top of grip. Barrel Dimensions: Point A = 1.245" and Point B = 0.9"Center to Center of Action Screws: 7.345" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad. Barrel contour for the light weight "Mountain" version.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the floor plate, mag box, and take down screws from your factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $147.55
    Available: 
    1
    View Details
  • Browning AB-3 LH STK RH ACT...

    PLAT Browning AB-3 LH STK RH ACT DBM LA FBC Blaze Satin Finish Kick-Eez Pad Barrel Dimensions: Point A = 1 5/32" and Point B = 45/64" Center to Center of Action Screws: 5 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and Bolt release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $146.83
    Available: 
    1
    View Details
  • Remington 870 20 Gauge Ste...

    Sterling Remington 870 20 Gauge Sterling Thumbhole Stock & Forend Nutmeg Satin Finish Boyds Pad Laser Panel FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: N/ABarrel Channel Point B: N/AMag Tube Width: 1 "Mag Tube Shoulder to Shoulder: 5 3/8 "Over All Length of Part: 9 "Boyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.The Remington 750 is interchangeable with the Remington 870.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK Stock comes with mounting bolt.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 9/16"Stock Height at Receiver: 1 13/16"Stock Width at Receiver: 1 5/16"Overall Length of Stock: 14"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmayr Decelerator recoil padBoyds inlets (both butt and fore end) for the Remington 870, 20 gauge are for the Lightweight version. Remington also produced/produces the 870, 20 gauge on the 12 gauge frame. If you have the 20 gauge version that is built on the 12 gauge frame, you need to order the 12 gauge butt and fore end. If you are unsure of which version you have, contact a qualified gunsmith for assistance.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS: These stocks are designed for the smaller frame models.. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $124.80
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LH ...

    LH FT SAV 220 SLUG GUN DBM LA LH ACT FBC Nutmeg Satin Finish Pachmayr Pad Barrel Dimensions: Point A = 11/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS : This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $118.30
    Available: 
    1
    View Details
  • RUGER AMERICAN CENTERFIRE S...

    HERT RUGER AMERICAN CENTERFIRE SA DBM FBC Claro X Satin Finish Boyds Pad Barrel Dimensions: Point A = 55/64" and Point B = 23/32" Center to Center of Action Screws: 3 7/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. ATTENTION CUSTOMERS: You will need the rear magazine block, front magazine block, and takedown screws. We will provide the trigger guard and screw. ATTENTION CUSTOMERS: Not compatible with target model.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $174.85
    Available: 
    1
    View Details
  • SAV 111 TBR DETACHABLE MAGA...

    FT SAV 111 TBR DETACHABLE MAGAZINE, LONG ACTION, FACTORY BARREL CHANNEL Blackjack High Gloss Hi Viz Pad Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: 3 11/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models. Do not over tighten. All plastic stocks, and some laminate and hardwood stocks will require you to purchase a different trigger guard and floor plate. You can purchase them on the Accessories page, bottom left-hand corner. Some stocks may also require different action screws which are available through DiProductsInc: PN 13020. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $170.92
    Available: 
    1
    View Details
  • REM 700 LA DETACHABLE MAG FBC

    FT REM 700 LA DETACHABLE MAG FBC Pepper Satin Finish Kick-Eez Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet for the standard factory tapered barrel. These stocks are designed for the Remington 700 right hand long action receiver with factory supplied detachable box magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $136.10
    Available: 
    1
    View Details
  • REM 700 BDL LA FBC LH STH L...

    HERT REM 700 BDL LA FBC LH STH LH ACT FBC Nutmeg Satin Finish Limbsaver Pad Black Grip Cap Black Polymer Tip Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 LEFT Hand Long Action with hinged floor plate. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $146.90
    Available: 
    1
    View Details
  • WIN 70 SA 1-PC FP FBC Post 64

    PH WIN 70 SA 1-PC FP FBC Post 64 Walnut Satin Finish Boyds Pad Pillar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:This stock will not work for the WSSM caliber rifles. Pre 1984 actions are based on the long action receiver.These stocks are designed for the Short Action 1 piece hinged floor plate with standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $157.30
    Available: 
    1
    View Details
  • AK-47 RECEIVER RIFLE GRIP &...

    AK-47 ROMAN/EASTERN EUROPEAN STAMPED RECEIVER RIFLE GRIP & STOCK Nutmeg Satin Finish Boyds Pad GRIP It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Receiver Face to Head of Mounting Screw: 3 55/64"Diameter of Through Hole: 5/16"Width of Trigger Guard: 31/64" Over All Length of Part: 4 35/64" ATTENTION CUSTOMERS: This grip was built off a WASR-10. You will need the mounting screw and threaded receiver block. We will provide the washer for the mounting screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: 9/16" Top Tang Length: 1 3/8" Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 29/64" Overall Length of Stock:10 55/64" Length of Pull: 12 3/4" Boyds' 1/2" Rubber Recoil Pad ATTENTION CUSTOMERS: This stock is built off a WASR-10. We will provide a drill bit for you to drill the mounting holes. You will need your mounting screws from your stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $82.55
    Available: 
    1
    View Details
  • Winchester 70 (Pre-Wwii) 2 ...

    Featherweight Thumbhole Winchester 70 (Pre-Wwii) 2 Piece Floor Plate Long Action Factory Barrel Channel Forest Camo Satin Finish Kick-EEZ Pad Barrel Dimensions: Point A = 1.143" and Point B = 0.766"Center to Center of Action Screws: 7.465" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: This inlet is for the Model 70 Pre WWII model. There are differences between the model 70 pre WWII and the Model 70 Pre 64. Most notable is that the Pre WWII has a clover leaf rear tang on the receiver. You must identify which model you have prior to ordering. You will need take down screws and 2 piece floor plate from the factory stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $136.10
    Available: 
    1
    View Details
  • ROSSI WIZARD .223 FOREND & ...

    ROSSI® WIZARD .223 FOREND & STOCK Walnut Satin Finish FOREND Barrel Channel Point at Rear: 1.114"Barrel Channel Point at Front: .822"Receiver Edge to Center of Mounting Screw:7.706"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10.625"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:Customer will need factory sling stud and mounting screw from factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. STOCK Barrel Channel Point at Rear: 1.114"Barrel Channel Point at Front: .822"Receiver Edge to Center of Mounting Screw:7.706"Magazine Tube Width: N/A"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10.625"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:Customer will need factory sling stud and mounting screw from factory forend.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefunable & nonreturnable.
    Price: 
    $111.80
    Available: 
    1
    View Details
  • Winchester 70 Post 64 LONG ...

    Classic Winchester 70 Post 64 LONG ACTION, 2-PIECE FLOOR PLATE, FACTORY BARREL CHANNEL Claro X Walnut Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 7/32" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 2 piece hinged floor plate with standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $141.65
    Available: 
    1
    View Details
  • Browning AB-3 DBM LA FBC

    FT Browning AB-3 DBM LA FBC Forest Camo High Gloss Finish Boyds Pad Laser Symbol LOP 12 3/4" Barrel Dimensions: Point A = 1 5/32" and Point B = 45/64" Center to Center of Action Screws: 5 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and Bolt release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $128.05
    Available: 
    1
    View Details
  • SAV A17 SEMI-AUTO DBM LH ST...

    FT SAV A17 SEMI-AUTO DBM LH STK RH ACT FBC Forest Camo Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 0.92" and Point B = 0.69"Center to Center of Action Screws: 7.444" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the front take down screw & washer from rear takedown screw from your original stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $134.55
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAG ...

    PH SAV 110 BBR DETACHABLE MAG LA FBC Pepper High Gloss Finish Boyds Pad LOP 14' Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $115.05
    Available: 
    1
    View Details
  • RUGER ACF PREDATOR AR MAG S...

    VT RUGER ACF PREDATOR AR MAG Zombie Satin Finish Limbsaver Pad ATTENTION: STAIN MARK ABOVE THE THUMBHOLE. BROWN COLORING OVER LAMINATE. Barrel Dimensions: Point A = 1 1/64" and Point B = 3/4" Center to Center of Action Screws: 4 3/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : We will provide the Ruger American AR magazine conversion floor plate, front and rear lugs, front and rear taked down screws, trigger guard screw, magazine release catch, magazine release spring, magazine release button. Boyds Gunstocks recommends bedding the front and rear lugs.. ATTENTION: A relief cut to allow magazine release button clearance has been added. ATTENTION CUSTOMERS : You will need round specific magazines for the 7.62x39, 300 Blackout, 350 legend, and 6.5 grendel. Due to dimmensional differences they will not feed or stack properly in a standard 5.56 magazine. Calibers that are not compatible include: .308, 6.5 Creedmoor, and .243. Calibers that are compatible without round specific magazines: .223 and .204. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $188.18
    Available: 
    1
    View Details
372 products
Items per page: 25 50 75 View All
All finished Rapid Fire Gunstocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!