The prices shown reflect all discounts applied.

Rapid Fire Products

:
262 products
Items per page: 40 80 120 View All
  • BROWNING AB-2 SA FACTORY BA...

    SPIKE CAMP BROWNING AB-2 SA FACTORY BARREL CHANNEL Nutmeg Satin Finish Boyds Pad Laser Symbol Pillar Bedding Barrel Dimensions: Point A = 1 3/16" and Point B = 11/16" Center to Center of Action Screws: 4 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety is located on the tang and Bolt release is on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION: You will need your factor floor plate, trigger guard w/trigger, mag box, and take down screws. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $167.45 $197.00
    Available: 
    1
    View Details
  • NEF Handi-Rifle Heavy Barr...

    NEF Handi-Rifle Heavy Barrel Channel Forend Nutmeg Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 11/16 Barrel Channel Point B: 7/8 Receiver Edge to Center of Mounting Screw: 3 5/8 Center to Center of Mounting Screws: N/A Over All Length of Part: 9 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:If you are converting from a plastic forend, you will need to purchase rear mounting bracket directly from H&R or Numerich. Numerich part #: 1571800E. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • TCA Contender Pistol Forend

    TCA Contender Pistol Forend Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel : 27/32"Barrel Channel Point B: 27/32"Receiver Edge to Center of Mounting Screw: 23/32"Center to Center of Mounting Screws: 3 1/8"Screw Hole Diameter: 1/4"Screw Head Hole Diameter: 5/16"Over All Length of Part: 11"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • MOSSBERG 500 12 GA BANTAM F...

    MOSSBERG® 500 12 GA BANTAM FOREND Sky Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Magazine Tube Width: 1 1/2 Magazine Tube Shoulder to Shoulder: 5 3/4 Over All Length of Part: 9 1/4 ATTENTION CUSTOMERS: On your action slide tube, measure from top of threads to bottom of collar that holds the action bars. This measurement is critical! This forend is for the 7 5/8" action slide. If your action slide measures 6 1/2", see our American Plainsman Bantam Forend Shape! NOTE: Since 2006, some newer models shotguns with synthetic forearms may not use an action slide tube at all; rather, the pump handle will have two integral bars pinned into the handle itself. If you have one of these, you cannot use a forearm that was designed to go over an action slide tube without first buying the correct length tube and action slide tube nut. You may contact Havlin Sales at 636-937-6401 to obtain proper components. ATTENTION: Boyds Mossberg pump action fore arms (500 & 835) are designed for a two piece Slide Action Tube, i.e. there is a Slide Tube nut that holds the fore arm onto the Action Tube. If you have a one piece Slide Action Tube, i.e. the Action Bars are pinned to the fore arm and are integral, you will need to purchase the appropriate length/gauge of two piece Slide Action Tube and Slide Action Tube Nut. These are available from gun parts stores such as Midway USA or Brownells. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $36.40 $56.00
    Available: 
    1
    View Details
  • Browning Bar Type 1 Forend

    Browning Bar Type 1 Forend Coyote Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.35 $79.00
    Available: 
    1
    View Details
  • Browning BAR Type 1 Forend

    Browning BAR Type 1 Forend Nutmeg Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • Browning Bar Stock

    Sterling Browning Bar Stock Nutmeg Satin Finish Boyds Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/A"Top Tang Length: N/A"Bottom Tang Width: 5/8"Bottom Tang Length: 3/4"Stock Height at Receiver: 2"Stock Width at Receiver: 1 3/8"Overall Length of Stock:13 1/16"Measurement of Receiver Mounting Bolt: 5 3/4"BUTTPLATEAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • H&R Single Shot Stock

    Sterling H&R Single Shot Stock Nutmeg Satin Finish Boyds Pad Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • Mossberg 500 12 Gauge Stock

    Sterling Left Hand Mossberg 500 12 Gauge Stock Nutmeg Satin Finish Boyds Pad Stock comes with mounting bolt. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 3/8" Stock Height at Receiver: 1 13/16" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $70.20 $108.00
    Available: 
    1
    View Details
  • Browning Bar Stock

    Browning Bar Stock Coyote Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/A"Top Tang Length: N/A"Bottom Tang Width: 5/8"Bottom Tang Length: 3/4"Stock Height at Receiver: 2"Stock Width at Receiver: 1 3/8"Overall Length of Stock:13 1/16"Measurement of Receiver Mounting Bolt: 5 3/4"BUTTPLATEAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $59.48 $91.50
    Available: 
    1
    View Details
  • Browning BPS 12 Gauge Stock

    American Plainsman Browning BPS 12 Gauge Stock Nutmeg Satin Finish Pachmayr Pad Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 13/16" Stock Width at Receiver - 1 13/16" Overall Length of the Stock- 12 13/16" Measurement of Receiver Mounting Bolt - 5 1/4" Pachmayr Decelerator Recoil Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $81.90 $126.00
    Available: 
    1
    View Details
  • H&R Single Shot Stock

    Sterling H&R Stock Nutmeg Satin Finish Boyds Pad Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • H&R Single Shot Stock

    Sterling H&R Single Shot Stock Nutmeg Satin Finish Boyds Pad ATTENTION CUSTOMERS: VOID IN GRAIN OF THUMBHOLE. Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • Marlin 336 Pistol Grip Stock

    Marlin 336 Pistol Grip Stock Nutmeg Satin Finish Boyds Pad Length of Pull 13 3/4"Top Tang width 1/2"Top Tang length 3 1/16"BottomTang width 9/16"BottomTang length 3 1/8 "Stock height at receiver 1 3/4 "Stock width at receiver 1 1/2 " All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • H&R Stock

    Sterling H&R Stock Nutmeg Satin Finish Boyds Pad Stock comes with a 2" mounting bolt that will require 7/32 allen wrench for assembly. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: N/A Bottom Tang Length: N/A Stock Height at Receiver: 1 3/4" Stock Width at Receiver: 1 15/32" Overall Length of Stock: 12 3/4" Comes with 3/4" vented recoil pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS: These stocks are designed for the modern style knuckle style receiver. Please see our H&R round tang stock for older tanged receiver models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • Marlin 336 Pistol Grip Stock

    Marlin 336 Pistol Grip Stock Nutmeg Satin Finish Boyds Pad Laser Panel Length of Pull 13 3/4"Top Tang width 1/2"Top Tang length 3 1/16"BottomTang width 9/16"BottomTang length 3 1/8 "Stock height at receiver 1 3/4 "Stock width at receiver 1 1/2 " All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $88.73 $136.50
    Available: 
    1
    View Details
  • SAVAGE 10 TBR, DETACHABLE M...

    SPIKE CAMP THUMBHOLE, SAVAGE 10 TBR, DETACHABLE MAGAZINE, SHORT ACTION, FACTORY BARREL CHANNEL Zombie Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Short Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $115.60 $136.00
    Available: 
    1
    View Details
  • SAV 110 TBR BLIND MAG LONG ...

    HERT SAV 110 TBR BLIND MAG LONG ACTION CENTER FEED LH STH LH ACT FBC Pepper Satin Finish Pachmayr Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside of the stock when the barreled action is removed. If the magazine box stays attached to the action you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $196.30 $302.00
    Available: 
    1
    View Details
  • Rem 700 BDL LA LH STK LH AC...

    FT Rem 700 BDL LA LH STK LH ACT FBC Forest Camo Satin Finish Kick-EEZ Pad Laser Panel Angled Walnut Tip Pillar Bedding Barrel Dimensions: Point A = 1 1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 LEFT Hand Long Action with hinged floor plate. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $238.23
    Available: 
    1
    View Details
  • Marlin 336 Cap Style Forend

    Marlin 336 Cap Style Forend Claro X Walnut Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Channel Point A: 15/16"Barrel Channel Point B: 13/16"Magazine Tube Width: 3/4"Magazine Tube Shoulder to Shoulder: 9 1/4"Over All Length of Part: 9 9/16"All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee.ATTENTION CUSTOMERS:There are a few variations of Cap style forends that were made for this model. Please confirm dimensions prior to ordering. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $84.18 $129.50
    Available: 
    1
    View Details
  • Marlin 336 Barrel Band Forend

    Marlin 336 Barrel Band Forend Black Textured It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Magazine Tube Width: 21/32" Center to Center of Mounting Screws/Magazine Tube Shoulder to Shoulder: N/A" Shoulder to Shoulder for Barrel Band: 8 3/16" Over All Length of Part: 10 1/8" ATTENTION CUSTOMERS:There are many configurations of forends for this model please confirm dimensions with those supplied. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $38.35 $59.00
    Available: 
    1
    View Details
  • M1 GARAND REAR HANDGUARD Wa...

    M1 GARAND REAR HANDGUARD Walnut Oil Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A Center to Center of Mounting Screws: N/A Over All Length of Part: 7 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee. ATTENTION CUSTOMERS: This Item Has An Authentic Military Oil Finish.No metal hardware is included. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $103.20 $172.00
    Available: 
    1
    View Details
  • Mossberg 500 12 Gauge Stock

    Sterling Mossberg 500 12 Gauge Stock Forest Camo Satin Finish Boyds Pad Stock comes with mounting bolt. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A Top Tang Length: N/A Bottom Tang Width: 1/2" Bottom Tang Length: 3/8" Stock Height at Receiver: 1 13/16" Stock Width at Receiver: 1 7/16" Overall Length of Stock: 12 3/4" Comes with 3/4" vented pad All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $51.68 $79.50
    Available: 
    1
    View Details
  • TIKKA T3 CTR LA FBC

    HERT TIKKA T3 CTR LA FBC Walnut Satin Finish Boyds Pad Walnut LOP 13 1/2" Barrel Dimensions: Point A = 1 1/8" and Point B = 51/64 Center to Center of Action Screws: 7 1/32" Over All Length of Part: 31 1/2 It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part ATTENTION CUSTOMER: You will need the floor plate and take down screws from your factory stock. We will provide the lug. Width of magazine opening is 1 3/8". ATTENTION CUSTOMERS: This stock is NOT compatible with the T3x Compact Tactical. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $125.78 $193.50
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAGA...

    FT SAV 110 BBR DETACHABLE MAGAZINE LA FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Ruger American Centerfire L...

    FT Ruger American Centerfire Long Action DBM FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs. Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Does not work with AI or AR Mags. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $112.78 $173.50
    Available: 
    1
    View Details
  • CZ 452 2E AMERICAN MAGAZINE...

    RIMFIRE HUNTER CZ 452 2E AMERICAN MAGAZINE FEED FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = .99" and Point B = .712"Center to Center of Action Screws: 3.235"Over All Length of Part: 31.25"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, trigger plate and clip from the factory stock. ATTENTION CUSTOMERS: Not compatible with ZKM model variations. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • WIN 70 LA 1-PC FP FBC POST 64

    CLA WIN 70 LA 1-PC FP FBC POST 64 Nutmeg Satin Finish Boyds Pad Laser Symbol Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 1 piece floor plate design with standard factory tapered barrel. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $115.70 $178.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LH ...

    FT CHARLES DALY MAUSER MARK X #1 BC Royal Jacaranda Satin Finish Pachmayr Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Length of Floor Plate 8 11/16" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour Barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $133.25 $205.00
    Available: 
    1
    View Details
  • REMINGTON 700 MUZZLELOADER ...

    FT REMINGTON 700 MUZZLELOADER SA FBC Zombie Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 55/64"Center to Center of Action Screws: 6 1/2"Over All Length of Part: 31 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION: Not compatible with the Ultimate Muzzleloader. This stock is design with the ramrod channel.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $129.35 $199.00
    Available: 
    1
    View Details
  • Browning A-Bolt 2 Short Act...

    FT Browning A-Bolt 2 SHORT ACTION, FACTORY BARREL CHANNEL Pepper Satin Finish Boyds Pad Laser Panel Pillar Bedding It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions:Where Barrel meets the receiver/ Point A = 1.175" Barrel Dimensions: 9 inches in front of Point A/ Point B = .680 Center to Center of Action Screws: 7.2" Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $176.15 $271.00
    Available: 
    1
    View Details
  • SAV 11 TBR BLIND MAGAZINE, ...

    FT SAV 11 TBR BLIND MAGAZINE, SHORT ACTION STAGGERED FEED, FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. When you disassemble your action the magazine box will be attached to the receiver. If the magazine box stays inside of the stock when the barreled action is removed, you may need the Center Feed Model or CTF version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • BENJAMIN MARAUDER GEN 2 AIR...

    PRO VARMINT BENJAMIN MARAUDER GEN 2 AIR GUN Walnut High Gloss Boyds Pad Barrel Dimensions: Point A = .883" and Point B = .883"Center to Center of Action Screws: n/a" Over All Length of Part: 31.4375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the trigger guard, takedown screw and wood screw from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Non-refundable & non-returnable.
    Price: 
    $142.68 $219.50
    Available: 
    1
    View Details
  • MOSSBERG PATRIOT LONG ACTIO...

    SPIKE CAMP MOSSBERG PATRIOT LONG ACTION DBM FBC Walnut Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 5/16" Over All Length of Part: 31.5" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS : You will need the Mag Insert, Mag Box, Take Down Screws from your factory stock. We will provide Trigger Guard, Rear Action Screw, and Wood Screw. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $206.13 $242.50
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA EXT...

    HERT SAV 220 SLUG GUN DBM LA EXTD FP RH ACTION FBC Nutmeg Satin Finish Boyds Pad Black Grip Cap Angled Black Polymer Tip Barrel Dimensions: Point A = 1 1/16" and Point B = 14/16" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: Longer floor plate for this model is 6 3/16" and is .4 longer than the older version. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock.This stock is designed for the right hand bolt action only. We will installed the swivels. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Non-refundable & non-returnable.
    Price: 
    $135.85 $209.00
    Available: 
    1
    View Details
  • LITHGOW LA102 SA DBM FBC

    PRO VARMINT LITHGOW LA102 SA DBM FBC Shady Camo Satin Finish Limbsaver Pad Laser Panel Adjustable Comb Barrel Channel Dimensions: Point A - 1 1/8" Point B - 13/16" Center to Center Action Screws: 7 15/16" Comes with Boyds 1/2 Recoil Pad. ATTENTION CUSTOMERS: You will need your factory Rear Action Screw, Rear Action Screw Lug, Mag Box. ATTENTION CUSTOMERS: We will provide the Trigger Guard, Front Action Screw and Wood Screw, and Recoil Lug. Boyds recommends Glass Bedding at the forward Recoil Lug area. Exchange Factory Front Action Screw with Boyds provided Front Action Screw. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $206.70 $318.00
    Available: 
    1
    View Details
  • SAVAGE 110 TBR DETACHABLE M...

    SPIKE CAMP SAVAGE 110 TBR DETACHABLE MAGAZINE, LONG ACTION, FACTORY BARREL CHANNEL Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $115.60 $136.00
    Available: 
    1
    View Details
  • RUGER M77 TANG SAFETY, LONG...

    HERT RUGER M77 TANG SAFETY, LONG ACTION, FACTORY BARREL CHANNEL Nutmeg High Gloss Limbsaver Pad Initials: KJF Barrel Dimensions: Point A = 1 3/16" and Point B = 3/4" Center to Center of Action Screws: 7 3/4" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:These stocks are designed for the original Ruger model 77 with rear tang safety. Newer models will have safety located by the bolt handle on right hand side of action. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $229.00
    Available: 
    1
    View Details
  • REM 700 PTG SHORT ACTION DB...

    CLA REM 700 PTG SHORT ACTION DBM FBC Claro X Walnut Unfinished Pachmayr Pad Barrel Dimensions: Point A = 1.25" and Point B = .75"Center to Center of Action Screws: 6.5"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: This inlet is designed to accept PTG short action flushmount detachable mag bottom metal with M5 footprint .   You will need to purchase the PTG floor plate separately from PTG.  Please visit the PTG website for any of the following part numbers:  30183fe1, p5659618. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $196.95 $303.00
    Available: 
    1
    View Details
  • SAVAGE 110 BBR DETACHABLE M...

    PRO VARMINT SAVAGE 110 BBR DETACHABLE MAG LONG ACTION FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Win 70 La 1-pc Fp Fbc Zz Po...

    Heritage Win 70 La 1-pc Fp Fbc Zz Post 64 Royal Jacaranda Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 5/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:These stocks are designed for the Long Action 1 piece floor plate design with standard factory tapered barrel. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $197.50
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LH ...

    PH SAV 220 SLUG GUN DBM LA LH STH LH ACT FBC Nutmeg Satin Finish Pachmayr Pad Pillar Bedding LOP 13 1/2" Barrel Dimensions: Point A = 11/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS : This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable and nonreturnable.
    Price: 
    $159.25 $245.00
    Available: 
    1
    View Details
  • WIN 70 SHORT ACTION 1-PC FL...

    CLASSIC WIN 70 SHORT ACTION 1-PC FLOOR PLATE POST 64 Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:This stock will not work for the WSSM caliber rifles. Pre 1984 actions are based on the long action receiver.These stocks are designed for the Short Action 1 piece hinged floor plate with standard factory tapered barrel. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • M1 CARBINE STOCK & HANDGUARD

    M1 CARBINE STOCK & HANDGUARD Walnut Oil Finish STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel: 39/64" Tube Barrel Receiver/action is approximately 6 19/64" long by 1 7/32" wide. Over All Length of Part: 28 1/4" ATTENTION CUSTOMERS: This requires all metal components and sling assembly from the original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee HANDGUARD N/A All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $138.78 $213.50
    Available: 
    1
    View Details
  • ANSHUTZ 64 MAGAZINE FBC

    RVT ANSHUTZ 64 MAGAZINE FBC Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 0.86" and Point B = 0.68"Center to Center of Action Screws: 6.02" Over All Length of Part: 31"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the floor plate, takedown screws, machine screw/nut and trigger assembly from you factory stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable and nonreturnabe.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • REM 700 ULTIMATE MUZZLELOAD...

    FT REM 700 ULTIMATE MUZZLELOADER SA FBC Coyote High Gloss Pachmayr Pad Laser Panel ATTENTION CUSTOMERS: BLEMISH IN HIGH GLOSS FINISH. Barrel Channel Dimensions: Point A - 1 1/4" Point B - 7/8" Center to Center Action Screws: 6 1/2" Comes with Boyds 1/2" Recoil PadATTENTION CUSTOMERS: Boyds will provide the Wood Screw for Ram Rod Retainer Spring. Utilize the provided Wood Screw to attatch the Ram Rod Retainer Spring into Boyds Stock.ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Foam mold from Floor Plate, Ram Rod Retainer Spring, & Ram Rod.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $187.20 $288.00
    Available: 
    1
    View Details
  • Browning A-Bolt LA FBC

    PRO VARMINT SAVAGE 93R BBC Shady Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: 3 11/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models. Do not over tighten. All plastic stocks, and some laminate and hardwood stocks will require you to purchase a different trigger guard and floor plate.You can purchase them on the Accessories page, bottom left-hand corner. Some stocks may also require different action screws which are available through DiProductsInc: PN 13020. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Savage 99 Spring Clip Forend

    Savage 99 Spring Clip Forend Green Textured It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 1/16" Barrel Channel Point B: 23/32" Receiver Edge to Center of Mounting Screw: 6 3/4" Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 9 1/2" Over All Width at Receiver: 1 7/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:There are 2 known variations of the spring clip design, please confirm dimensions prior to ordering. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $43.23 $66.50
    Available: 
    1
    View Details
  • Remington 760 Gamemaster F...

    Remington 760 Gamemaster Forend Pepper Satin Finish ATTENTION CUSTOMERS: WOOD KNOT IN FOREND. Barrel Channel Point at Rear: 1.237"Barrel Channel Point at Front: 0.789"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: 0.875"Center to Center of Mounting Screws: N/A"Magazine Tube Shoulder to Shoulder: 3.985"Over All Length of Part: 7.809"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • Benelli Super Black Eagle I...

    Benelli Super Black Eagle II 12 Gauge Forend ClaroX Walnut Satin Finish All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $96.20 $148.00
    Available: 
    1
    View Details
  • TCA Encore Rifle Forend

    TCA Encore Rifle Forend Blaze High Gloss It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw/Magazine Tube Width: N/A" Center to Center of Mounting Screws: 5" Over All Length of Part: 11" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:Many variations in mounting screws exist please confirm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $68.25 $102.00
    Available: 
    1
    View Details
  • REMINGTON® 1100 12 GA FE

    REMINGTON® 1100 12 GA FE Sky Satin Finish Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Receiver Edge to Center of Mounting Screw/Magazine Tube Width: 1 9/16 " Magazine Tube Shoulder to Shoulder: N/A Over All Length of Part: 11 3/4 All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable and nonreturnable.
    Price: 
    $87.43 $134.50
    Available: 
    1
    View Details
  • WINCHESTER® 94 POST 64 BARR...

    WINCHESTER® 94 POST 64 BARREL BAND FE Walnut Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Receiver: Approximately 1" Barrel Channel at End: 11/16" Receiver Edge to Center of Mounting Screw: 6 7/8" Shoulder to Shoulder: 6 11/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $62.08 $95.50
    Available: 
    1
    View Details
  • BROWNING BAR MKII STK & FE

    BROWNING® BAR MKII STK & FE Zombie Satin Finish Boyds Pad STOCK It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Top Tang Width: N/A" Top Tang Length: N/A" Bottom Tang Width: 9/16" Bottom Tang Length: 7/8" Stock Height at Receiver: 2" Stock Width at Receiver: 1 5/16" Overall Length of Stock:13 1/16" Measurement of Receiver Mounting Bolt: 5 3/4" BUTTPLATE ATTENTION CUSTOMER: Before you order, you must confirm which type of Browning BAR you have. Visit the Browning Web site or contact Browning directly to determine your version. You will need the Reciever Mounting Bolt(Not necessary for Sterling Shape) from the factory stock. We will provide the Butt Pad w/screws & Reciever Mounting Bolt for Sterling Shape. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1 17/64" Barrel Channel Point B: 3/4" Receiver Edge to Center of Mounting Screw: 9 7/32" Over All Length of Part: 13" ATTENTION CUSTOMERS:You will need the original swivel stud mounting screw. We will be providing the bushing/spacer where the swivel stud mounts to the gun. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $99.78 $153.50
    Available: 
    1
    View Details
  • SAV 110 BBR DETACHABLE MAGA...

    HERT SAV 110 BBR DETACHABLE MAGAZINE LONG ACTION FBC Nutmeg Satin Finish White line spacer kit Angled Black Polymer Tip Walnut Grip Cap Laser Panel Boyds Pad LOP 13 1/2" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.
    Price: 
    $188.50 $290.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA RH ...

    HERT SAV 220 SLUG GUN DBM LA RH ACTION FBC Nutmeg Satin Finish Limbsaver Pad Laser Panel Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $155.35 $239.00
    Available: 
    1
    View Details
  • SAV 111 TROPHY HUNTER BBR D...

    FT SAV 111 TROPHY HUNTER BBR DETACHABLE MAGAZINE LONG ACTION FBC Applejack High Gloss Pachmayr Pad Laser Symbol Angled Walnut Tip Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $209.95 $323.00
    Available: 
    1
    View Details
  • Tikka T3 DBM FBC

    Featherweight Thumbhole Tikka T3 DBM FBC Green Textured Paint Kick-EEZ Pad Laser Panel ATTENTION CUSTOMERS: THIN PAINT IN LASER ENGRAVINGS, WOOD COLOR SHOWS THROUGH. Barrel Dimensions: Point A = 1 9/64" and Point B = 45/64"Center to Center of Action Screws: 7"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.Safety is located on the tang and the Bolt Release is on the side of the receiver.ATTENTION CUSTOMERS: Steel lug will be furnished with the stock. Ensure proper installation of the lug during assembly.ATTENTION CUSTOMERS: This stock is compatible with the T3x model. ATTENTION CUSTOMERS: This stock is NOT compatible with the T3x Compact Tactical. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $187.53 $288.50
    Available: 
    1
    View Details
  • SAV 111 BBR DETACHABLE MAGA...

    FT SAV 111 BBR DETACHABLE MAGAZINE LA FBC Pepper Satin Finish Kick-Eez Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $140.73 $216.50
    Available: 
    1
    View Details
  • SAV 111 TBR DETACHABLE MAGA...

    FT SAV 111 TBR DETACHABLE MAGAZINE, LONG ACTION, FACTORY BARREL CHANNEL Blackjack High Gloss Hi Viz Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $175.15
    Available: 
    1
    View Details
  • BENJAMIN MARAUDER AIRGUN

    VT BENJAMIN MARAUDER AIRGUN Applejack Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.25" and Point B = 1.25" Over All Length of Part: 31.716"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:______________. You will need the trigger guard, and take down screws from your factory stock. We will provide Escutcheon.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $112.13 $172.50
    Available: 
    1
    View Details
  • CVA SCOUT V2 FE

    CVA SCOUT V2 FE Pepper Satin Finish Barrel Channel Point at Rear: 1"Barrel Channel Point at Front: 15/16"Receiver Edge to Center of Mounting Screw: N/A"Magazine Tube Width: N/A"Center to Center of Mounting Screws: 5 1/4"Magazine Tube Shoulder to Shoulder: N/A"Over All Length of Part: 10 1/2"It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the factory forend Takedown Latch and the factory two mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • WINCHESTER® 94 PRE-64 CAP S...

    WINCHESTER® 94 PRE-64 CAP STYLE FE Walnut Satin Finish All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $38.35 $59.00
    Available: 
    1
    View Details
  • BROWNING® BPS 12 GA FE & STOCK

    AP BROWNING® BPS 12 GA FE & STOCK Pepper Satin Finish Boyds Pad FOREND It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A" Barrel Channel Point B: N/A" Magazine Tube Width: 1 13/32" Magazine Tube Shoulder to Shoulder: 4 3/16 " Over All Length of Part: 9 " All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS: Early BPS actions will not work with these parts. STOCK Top Tang Width - N/A Top Tang Length - N/A Bottom Tang Width - 9/16" Bottom Tang Length - 11/16" Stock Height at Receiver - 1 13/16" Stock Width at Receiver - 1 13/16" Overall Length of the Stock- 12 13/16" Measurement of Receiver Mounting Bolt - 5 1/4" Pachmayr Decelerator Recoil Pad It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: These stocks will not work with the early style flat mount receivers. Minor variations exist on trigger guards and fitting may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Cz® 452-2e American Sa Maga...

    Pro V Cz® 452-2e American Sa Magazine Feed Lh Act Fbc Green Textured Paint Boyds Pad Adjustable Comb Barrel Dimensions: Point A = .99" and Point B = .712"Center to Center of Action Screws: 3.235"Over All Length of Part: 27.0"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, trigger plate and clip from the factory stock. ATTENTION CUSTOMERS: Not compatible with ZKM model variations. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $152.10 $234.00
    Available: 
    1
    View Details
  • CZ® 550 DBM SA BBC

    PRO VARMINT CZ® 550 DBM SA BBC Black Textured Paint Boyds Pad Barrel Dimensions: Point A = 1 7/64" and Point B = 55/64" Center to Center of Action Screws: 7 13/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety and Bolt Release are located on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • RUGER AMERICAN SHORT ACTION...

    LH FT RUGER AMERICAN SHORT ACTION DBM LEFT HAND STOCK RIGHT HAND ACTION FBC Royal Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32" Center to Center of Action Screws: 4 37/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: We will provide the front and rear lugs, front and rear takedown screws, triggerguard with screw, and the front magazine tab catch. Boyds Gunstocks recommends bedding the front and rear lugs. Long Action Calibers: 270 Win, 30-06 Spfld.ATTENTION CUSTOMERS : Does not work with AI or AR Mags. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $122.85 $189.00
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA RH ...

    HERT SAV 220 SLUG GUN DBM LA RH ACTION FBC Pepper Satin Finish Pachmayr Pad Barrel Dimensions: Point A = 1 1/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. This stock is designed for the right hand bolt action only. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • SAKO L61R FINNBEAR MAGNUM L...

    CLASSIC SAKO L61R FINNBEAR MAGNUM LONG ACTION FBC Claro X Walnut High Gloss White line spacer kit Limbsaver Pad Laser Panel Walnut Grip Cap Angled Black Polymer Tip Barrel Dimensions: Point A = 1 11/64" and Point B = 25/32"Center to Center of Action Screws: 7 51/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need your takedown screws, hinged floorplate, and mag well.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $289.58 $445.50
    Available: 
    1
    View Details
  • STEVENS 200 TBR BLIND MAD S...

    HERT STEVENS 200 TBR BLIND MAD SHORT ACTION CENTERFEED FBC Royal Jacaranda Satin Finish Boyds Pad LOP 13 1/4" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside the stock when the barreled action is removed. If the magazine box stays attached to the action, you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $112.13 $172.50
    Available: 
    1
    View Details
  • MOSSBERG MVP .308 SA DBM FBC

    CLA MOSSBERG MVP .308 SA DBM FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 55/64" Center to Center of Action Screws: 4 23/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need the takedown screw, escutcheon, trigger guard and screw, and plastic magazine liner from your stock. ATTENTION: Not compatible with LR Tactical with AR-Style Magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • MOSS MVP DBM SA FBC

    FT MOSS MVP DBM SA FBC Pepper Satin Finish Boyds Pad Barrel Dimensions: Point A = 1" and Point B = 45/64" Center to Center of Action Screws: 4 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your magazine liner, trigger guard with screw, takedown bolts, and take down bolt head washer. ATTENTION: Not compatible with LR Tactical with AR-Style Magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Weatherby VG Short Action BBC

    Varmint Thumbhole Weatherby VG Short Action Bull Barrel Channel F Pepper Satin Finish Pachmayr Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 1" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:This stock is designed for the Weatherby Vanguard Short Action, with factory Varmint Contour. Numerous other models have been manufactured using this action design.
    Price: 
    $122.20 $188.00
    Available: 
    1
    View Details
  • Savage 10 Ml II Muzzleloade...

    Prairie Hunter Savage 10 Ml II Muzzleloader Bull Barrel Channel Royal Jacaranda Satin Finish Limbsaver Pad Laser Panel Barrel Dimensions: Point A = 1.302" and Point B = .97"Center to Center of Action Screws: 4.415"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the take down screws, trigger guard and screw and spring for ram rod from your factory stock. There are two variations of the Savage 10 ML II(2).  You MUST verify the hole to hole dimensions of the take down screws to insure you are ordering the correct version.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $165.43 $254.50
    Available: 
    1
    View Details
  • STEVENS 200 TBR BLIND MAG S...

    HERT STEVENS 200 TBR BLIND MAG SHORT ACTION CENTER FEED FBC Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. When you disassemble your action the magazine box will stay inside the stock when the barreled action is removed. If the magazine box stays attached to the action, you may need the Staggered Feed Model or STAGGERED FEED version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $112.13 $172.50
    Available: 
    1
    View Details
  • SAV 11 BOLT ACTION SHORT AC...

    FT SAV 11 BOLT ACTION SHORT ACTION, BLIND MAGAZINE, BULL BARREL CHANNEL Forest Camo Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1.310" and Point B = .930"Center to Center of Action Screws: 4.415" Over All Length of Part: 31.50"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need take down screws, and trigger guard & screw from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $139.10 $214.00
    Available: 
    1
    View Details
  • REM 700 BDL LA FBC

    HERT REM 700 BDL LA FBC Blackjack Satin Finish Limbsaver Pad Walnut Grip Cap Angled Black Polymer Tip Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1-1/4" and Point B = 25/32" Center to Center of Action Screws: 7 3/8" Overall Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Inlett for standard factory tapered barrel channel. This stock is designed for the Remington 700 right hand long action hinged floor plate models. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $241.80 $198.50
    Available: 
    1
    View Details
  • WINCHESTER 70 POST 64 SHORT...

    HERT WINCHESTER 70 POST 64 SHORT ACTION, 2-PC FLOOR PLATE, FACTORY BARREL CHANNEL Pepper Satin Finish Kick-EEZ Pad Laser Symbol Black Grip Cap LOP 13 1/4" Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock will not work for the WSSM Caliber Rifles. Pre-1984 actions are based on the Long Action receiver. These stocks are designed for the Winchester? Model 70 Short Action 2-Piece hinged floor plate model with a standard factory tapered barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $171.28 $263.50
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LA FBC

    PLAT BROWNING A-BOLT 2 LA FBC Walnut Satin Finish Boyds Pad Laser Panel Pillar Bedding ATTENTION CUSTOMERS: ERROR WITH LASER ENGRAVINGS. ONE SIDE OF GRIP IS MULTI-POINT AND THE OTHER IS FLEUR DE'LIS. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 11/64" and Point B = 49/64"Center to Center of Action Screws: 7 59/64"Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need the floor plate, takedown screws, and trigger guard.Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $199.88 $307.50
    Available: 
    1
    View Details
  • SAV 220 SLUG GUN DBM LA LEF...

    LH FT SAV 220 SLUG GUN DBM LA LEFT HAND STK LEFT HAND ACT FBC Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Model Blind Magazine with Staggered Feed action and a top bolt release. When you disassemble your action the magazine box will be attached to the receiver. If the magazine box stays inside of the stock when the barreled action is removed, you may need the Center Feed Model or CTF version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • RUGER M77, SHORT ACTION , F...

    CLA RUGER M77, SHORT ACTION , FACTORY BARREL CHANNEL Circassian XX Walnut High Gloss White line spacer kit Walnut Tip Black Grip Cap Limbsaver Pad LOP 14" Barrel Dimensions: Point A = 1 3/16" and Point B = 3/4" Center to Center of Action Screws: 7 5/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION CUSTOMERS:These stocks are designed for the original Ruger model 77 with rear tang safety. Newer models will have safety located by the bolt handle on right hand side of action. All Rapid Fire sales are final!
    Price: 
    $331.83 $510.50
    Available: 
    1
    View Details
  • MOSSBERG MVP DETACHABLE BOX...

    VT MOSSBERG MVP DETACHABLE BOX MAGAZINE, SHORT ACTION ,FACTORY BARREL CHANNEL Shady Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1" and Point B = 45/64" Center to Center of Action Screws: 4 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need your magazine liner, trigger guard with screw, takedown bolts, and take down bolt head washer. ATTENTION: Not compatible with LR Tactical with AR-Style Magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $113.10 $174.00
    Available: 
    1
    View Details
  • TIKKA M65 DBM LA LH STK RH ...

    FT TIKKA M65 DBM LA LH STK RH ACT FBC Forest Camo Satin Finish Boyds Pad Barrel Channel Dimensions - Point A: 1 1/16" Point B: 3/4" Center to Center Action Screws: 7 1/16" ATTENTION CUSTOMERS: This stock is not compatible with the Tikka M65A. ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release Tab with Spring, and Mag Box. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • WIN 70 PRE-64 LA 2-PC FP FBC

    CLA WIN 70 PRE-64 LA 2-PC FP FBC Coyote Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 7/16" Over All Length of Part: N/A Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: These stocks are designed for the Winchester model 70 pre 64 long action, with a 2 piece floor plate, factory barrel. You will need your factory Trigger Guard, 2-Piece Hinged Floor Plate, 3 Action Screws, Machine Screw w/escutcheon(Forend Location) & Magazine Box. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $129.35 $199.00
    Available: 
    1
    View Details
  • SAV 11 TBR BLIND MAGAZINE, ...

    CLA SAV 11 TBR BLIND MAGAZINE, SHORT ACTION, FACTORY BARREL CHANNEL Coyote Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release (located on the side of the receiver). Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $113.10 $174.00
    Available: 
    1
    View Details
  • BROWNING T-BOLT POST 2006 L...

    RH BROWNING T-BOLT POST 2006 LA FBC Pepper High Gloss Boyds Pad Laser Panel Barrel Dimensions: Point A = 0.82" and Point B = 0.72"Center to Center of Action Screws: 2.47" Over All Length of Part: 30.375"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Key element is rotary magazine and tang safety, inlet is based on .17HMR. Length of mag opening: 1.973" ATTENTION CUSTOMERS: You will need the 2-take down screws and plastic mag insert from your original stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $156.00 $240.00
    Available: 
    1
    View Details
  • SAV 11 TBR BLIND MAGAZINE, ...

    PLATINUM SAV 11 TBR BLIND MAGAZINE, SHORT ACTION, STAGGERED FEED, FACTORY BARREL CHANNEL Pepper Satin Finish Limbsaver Pad Pillar Bedding lop 13 1/4" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $155.35 $239.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT SHORT ACTIO...

    FT BROWNING A-BOLT SHORT ACTION, FACTORY BARREL CHANNEL Forest Camo Satin Finish Boyds Pad LOP 13 1/2" Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 1/4" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out Browning for more info. All finished stocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • SAV 10 BBR DBM SA LH STK RH...

    PRO SAV 10 BBR SHORT ACTION LEFT HAND STOCK RIGHT HAND ACTION DETACHABLE BOX MAGAZINE BULL BARREL CHANNEL Zombie Hunter High Gloss Boyds Pad Laser Symbol: Skull/Crossbones Barrel Dimensions: Point A = 1 1/8" Point B = 1 1/16" Center to Center Action Screws: 4 7/16" Overall Length of Part: N/A Comes with Boyds 1/2" Recoil Pad. ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws and Detachable Box Mag. ATTENTION CUSTOMERS: This stock is designed for the Savage Detachable Box Magazine rifles with bottom bolt release (located on the front of the trigger guard). The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock. MUST READ: If you have a XP model with a synthetic stock, you will need to purchase the bottom metal component system through Savage or any aftermarket component supplier. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the accessories page SAVAGE SA PLASTIC MAG WELL Item #: A09161 Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $143.65 $221.00
    Available: 
    1
    View Details
  • SAV 110 1ST GEN BLIND MAG S...

    PLAT SAV 110 1ST GEN BLIND MAG SA LH STH LH ACT FBC Pepper Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1.028" and Point B = .715"Center to Center of Action Screws: 4.51" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: Recoil to front action screw: 1.01" This inlet is for Savage 110 1st Generation Firearms. They are also referred to as "J" series or intermediate models. You will need the take down screws, trigger guard and mag box & spring from your factory stock. .All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable and nonreturnable.
    Price: 
    $139.10 $214.00
    Available: 
    1
    View Details
  • BROWNING BBR LA FBC

    CLA BROWNING BBR LA FBC Claro X Walnut High Gloss Boyds Pad Black Grip Cap Angled Walnut Tip ATTENTION CUSTOMERS: DENT ON DROP CHEEK PIECE, CIRCLED ON STOCK. LIGHT SCRATCH IN FINISH ON OPPOSITE SIDE OF BUTTSTOCK. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Barrel Dimensions: Point A = 1 11/64" and Point B = 47/64"Center to Center of Action Screws: 8 19/64”Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, and mag will. You will also need to remove he middle floor plate screw insert and reinstall in your Boyds upgrade stock or purchase the proper wood screw. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Non-refundable & non-returnable.
    Price: 
    $227.18 $249.50
    Available: 
    1
    View Details
  • WINCHESTER® 94 POST 64 BARR...

    WINCHESTER® 94 POST 64 BARREL BAND FE Coyote Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel at Receiver: Approximately 1" Barrel Channel at End: 11/16" Receiver Edge to Center of Mounting Screw: 6 7/8" Shoulder to Shoulder: 6 11/16" All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $49.40 $76.00
    Available: 
    1
    View Details
  • WINCHESTER® 94 PRE-64 CAP S...

    WINCHESTER® 94 PRE-64 CAP STYLE FE Applejack Satin Finish All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $48.43 $74.50
    Available: 
    1
    View Details
  • WIN 70 SHORT ACTION 2-PC FL...

    CLA WIN 70 SHORT ACTION 2-PC FLOOR PLATE FBC POST 64 Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. THIS STOCK WILL NOT WORK FOR THE WSSM CALIBER RIFLES. PRE 1984 ACTIONS ARE BASED ON THE LONG ACTION RECEIVER. THESE STOCKS ARE DESIGNED FOR THE WINCHESTER® MODEL 70 SHORT ACTION 2-PIECE HINGED FLOOR PLATE MODEL, WITH STANDARD FACTORY TAPERED BARREL. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • CLASSIC UNINLET Walnut Unfi...

    CLASSIC UNINLET Walnut Unfinished Boyds Pad Rear Receiver Height 2.350 Front Receiver Height 2.040 Rail Thickness for Receiver 1.810 Tapered Forend Width at the End 1.210 & Height at the End 1.260 Overall Length of Part is 31 1/4" Including 1/2" Recoil Pad This stock has the BOYDS' Classic shape; however, the inletting and final sanding and finish has been LEFT up to the customer for their desired action. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $107.58 $165.50
    Available: 
    1
    View Details
  • TC Icon Long Action Factory...

    Classic TC Icon Long Action Factory Barrel Channel Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1.182" and Point B = 0.682"Center to Center of Action Screws: 8.035"Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil PadIt is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: This item is not compatible with detachable magazine models. This item is designs for the hinged floor plate TC Icon model.  You will need Floor Plate & Take Down Screws from your original stock.  WE will provide red safety ball.  All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Ar-15/M16 Finger Groove Grip

    Ar-15/M16 Finger Groove Grip Walnut Satin Finish Laser Panel Over All Length of Part: 4 1/4" Will fit all Carbine, Mid, and Rifle length AR-15's. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire Sales are final! Nonrefundable & nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Remington 760 Takedown Forend

    Remington 760 Takedown Forend Nutmeg Satin Finish It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A Barrel Channel Point B: N/A Width for Receiver Clearance : 1 3/8" Magazine Tube Shoulder to Shoulder: 6 " Over All Length of Part: 8 1/4 " ATTENTION CUSTOMERS:This part is not designed for the early 760 pump with tube nut retainer. This a Boyds' design forend, we do not offer original replacements. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • Ar-15/M16 Finger Groove Grip

    Ar-15/M16 Finger Groove Grip Royal Satin Finish Laser Panel Over All Length of Part: 4 1/4" Will fit all Carbine, Mid, and Rifle length AR-15's. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $75.40 $116.00
    Available: 
    1
    View Details
  • Ar-15/M16 Rifle Handguard Set

    Ar-15/M16 Rifle Handguard Set Walnut Satin Finish INTERNATIONAL ORDERS FOR THIS PRODUCT WILL NOT BE PROCESSED. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: N/A " Barrel Channel Point B: N/A " Forend Shoulder to Shoulder: 11 21/32" Over All Length of Part: 11 15/16" ATTENTION CUSTOMERS: This forend is for the AR rifle compression style model. They are not designed to replace the free float handguards. These handguards will not fit the triangle front caps. It must have the front "cap" by the gas block and the delta ring. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $67.93 $104.50
    Available: 
    1
    View Details
  • WIN 70 NFP SHORT ACTION FBC...

    CLA WIN 70 NFP SHORT ACTION FBC POST 64 Sky Satin Finish Boyds Pad Laser Panel Barrel Dimensions: Point A = 1 3/16" and Point B = 13/16" Center to Center of Action Screws: 7 1/8" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee . ATTENTION CUSTOMERS :This stock will not work for the WSSM caliber rifles. Pre-1984 actions are based on the Long Action Receiver. These stocks are designed for the Winchester Model 70 Short Action no floorplate model, with standard factory barrel contour. Due to changes made by Winchester to magazine sleeves for short action calibers. Magazine wells that are taller than 1.220 in rear and 1.030 in front will need to be modified to fit Boyds' stocks. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $149.18 $229.50
    Available: 
    1
    View Details
  • Cva Optima V2 Forend

    Cva Optima V2 Forend Nutmeg Satin Finish Boyds Pads It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Channel Point A: 1" Barrel Channel Point B: 15/16" Receiver Edge to Center of Mounting Screw: 6" Over All Length of Part: 10 1/2" ATTENTION CUSTOMERS :You will need the factory forend mounting screws. One sling stud will be mounted on the forend. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & norefundable.
    Price: 
    $40.30 $62.00
    Available: 
    1
    View Details
  • SAKO L61R FINNBEAR MAGNUM L...

    CLA SAKO L61R FINNBEAR MAGNUM LONG ACTION FBC Pepper Satin Finish Limbsaver Pad LOP 14 1/4" Barrel Dimensions: Point A = 1 11/64" and Point B = 25/32"Center to Center of Action Screws: 7 51/64"Over All Length of Part: 31 1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need your takedown screws, hinged floorplate, and mag well.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $118.30 $182.00
    Available: 
    1
    View Details
  • HERTERS U9 FBC

    CLA HERTERS U9 FBC Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 15/64" and Point B = 23/32"Center to Center of Action Screws: 7 61/64"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the Mag box, trigger guard, floorplate, 2 takedown screws, 1 internal trigger guard screw from your gun.This inlet is for the Herters U9 Standard Short Action, which includes calibers of 22-250, .243, 6mm, 257 Roberts, 7 x 57 and .308. The Short action calibers of .222, .223 and .222 Magnum reportedly have shorter magazines and may not work in this inlet.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • WIN 70 SUPER SHORT ACTION P...

    FT WIN 70 SUPER SHORT ACTION POST 64 Pepper Satin Finish Boyds Pad Barrel Dimensions: where barrel meets receiver/Point A=1.138" Barrel Dimensions: 9 inches in front of Point A/Point B= .668" Center to Center of Action Screws: 6.35" Attention Customers: Winchester Super Short Magnum-Blind Mag-NO FLOOR PLATE Attention Customers: It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT 2 LONG ACTI...

    FT BROWNING A-BOLT 2 LONG ACTION FACTORY BARREL CHANNEL Pepper Satin Finish Kick-EEZ Pad Laser Panel It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. Barrel Dimensions: Point A = 1 11/64" and Point B = 49/64" Center to Center of Action Screws: 7 59/64" Over All Length of Part: 31/1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need the floor plate, takedown screws, and trigger guard. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $177.78 $273.50
    Available: 
    1
    View Details
  • HOWA 1500 MINI DBM STD #2 BC

    FT HOWA 1500 MINI DBM STD #2 BC Royal Satin Finish Kick-EEZ Pad Laser Symbol Angled Walnut Tip Barrel Dimensions: Point A = 1.095" and Point B = .653" Center to Center of Action Screws: 6.765" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $187.85 $289.00
    Available: 
    1
    View Details
  • BROWNING A-BOLT LONG ACTION...

    CLA BROWNING A-BOLT LONG ACTION LH STK RH ACT Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 13/16"Center to Center of Action Screws: 8"Over All Length of Part: 31/1/2"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:;Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO versions are different than the standard models. Check out;Browning;for more info.All finished stocks have been CNC inlet to Boyds House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • SAV 110 TACTICAL AICS MAG L...

    FT SAV 110 TACTICAL AICS MAG LH STK RH ACT Shady Camo Satin Finish Limbsaver Pad Barrel Dimensions: Point A = 1 1/16" and Point B = 14/16" Center to Center of Action Screws: 4 716" Over All Length of Part: N/A Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: You will need to order the Savage Screw Set from the Accessories page(PART #: 100010). This stock is designed for the Savage 110 Tactical model that utilizes an AICS platform and has a heavy barrel. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $129.35 $199.00
    Available: 
    1
    View Details
  • SAV 116 BLIND MAGAZINE, LO...

    FT SAV 116 BLIND MAGAZINE, LONG ACTION, STAGGERED FEED, FACTORY BARREL CHANNEL Nutmeg Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • SAV 11 TBR BLIND MAGAZINE, ...

    FT SAV 11 TBR BLIND MAGAZINE, SHORT ACTION, STAGGERED FEED, LH STOCK, RH ACTION, FACTORY BARREL CHANNEL Nutmeg High Gloss Kick-EEZ Pad LOP 14 1/4" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 9/32" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Staggered Feed action and a top bolt release. When you disassemble your action the magazine box will be attached to the receiver. If the magazine box stays inside of the stock when the barreled action is removed, you may need the Center Feed Model or CTF version we offer. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $157.63 $242.50
    Available: 
    1
    View Details
  • SAV 111 TBR DETACHABLE MAGA...

    CLA SAV 111 TBR DETACHABLE MAGAZINE, LONG ACTION, FACTORY BARREL CHANNEL Applejack High Gloss Boyds Pad Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with top bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. This stock is designed for the Savage Long Action Detachable Box Magazine rifles with top bolt release. The magazine release is located on the bottom of the floorplate. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from Savage or Brownells. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $129.03 $198.50
    Available: 
    1
    View Details
  • BROWNING A-BOLT II LEFT HAN...

    CLA BROWNING A-BOLT II LEFT HAND STOCK RIGHT HAND ACTION FBC Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/64" and Point B = 43/64" Center to Center of Action Screws: 7 13/64" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need the takedown screws, trigger guard, floorplate, and rear takedown shim plate from your gun. Before you order, you must confirm, by Serial Number, if your firearm model is an A-Bolt, A-Bolt II, or A-Bolt III. The roll stamping on all versions only states A-Bolt, regardless of model. Also confirm if your particular firearm is a MICRO version or not. MICRO Versions are different than standard models. Call Browning Customer Service for more information. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • WIN XPR SHORT ACTION FBC

    PH WIN XPR SHORT ACTION FBC Nutmeg Satin Finish Pachmayr Pad Pillar Bedding LOP 14" Barrel Dimensions: Point A = 1 5/32" and Point B = 23/32"Center to Center of Action Screws: 4 11/32"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need the Floorplate, rear takedown screw, front takedown screw, washer x2, mag spring, wood screw, magazine from your gun.The mag spring from factory stock will will need to be screwed in before assembly. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $159.25 $245.00
    Available: 
    1
    View Details
  • RUGER 77/357, FACTORY BARRE...

    PRO VARMINT, RUGER 77/357, FACTORY BARREL CHANNEL Black Textured Boyds Pad Barrel Dimensions: Point A = 1" and Point B = 47/64" Center to Center of Action Screws: 8 5/32" Bottom Magazine Opening Length: 2 21/32" Over All Length of Part: 31 1/4" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: You will need your takedown screws from your original stock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • Remington 700 Ml Short Acti...

    Heritage Remington 700 Ml Short Action Factory Barrel Channel Pepper Satin Finish Kick-EEZ Pad Barrel Dimensions: Point A = 1 3/16" and Point B = 55/64"Center to Center of Action Screws: 6 1/2"Over All Length of Part: 31 1/2" It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. ATTENTION: Not compatible with the Ultimate Muzzleloader. This stock is design with the ramrod channel.perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $140.73 $216.50
    Available: 
    1
    View Details
  • SAV 11 TBR SHORT ACTION, CE...

    PLAT SAV 11 TBR SHORT ACTION, CENTER FEED, LH STOCK, LH ACTION, FACTORY BARREL CHANNEL Forest Camo Satin Finish Kick-EEZ Pad Laser Symbol Walnut Grip Cap Angled Walnut Tip LOP 13 1/2" Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 4 7/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: New action screws are needed if your action screws are shorter than 1 1/4 and 1 1/2 respectively. These are sold separately in our gun parts section on the LEFT hand side of our webpage. This stock is designed for the Savage Blind Magazine with Center Feed Action and a top bolt release. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $200.20 $308.00
    Available: 
    1
    View Details
  • SAUER 100 DBM LONG ACTION FBC

    CLA SAUER 100 DBM LONG ACTION FBC Nutmeg Satin Finish Boyds Pad Laser Panel Black Polymer Tip Barrel Dimensions: Point A = 1 1/2" and Point B = 3/4 " Center to Center Action Screws: 7 5/8"ATTENTION CUSTOMERS : Washer Stock-Rear Action NOT required for Boyds stock. You will need your factory Floor Plate, Rear Action Screw, Front Action Screw, Front Action Screw "Nut". We will provide the Recoil Lug. This stock is designed for Generation 1 Sauer 100 without hex bolt extender, spacer washers are not required for installation. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.
    Price: 
    $156.00 $240.00
    Available: 
    1
    View Details
  • HEYM SR21 LONG ACTION FBC

    PH HEYM SR21 LONG ACTION FBC Forest Camo Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 1/8" Point B = 5/8" Center to Center Action Screws: 7 3/8" Overall Length of Part: N/A Comes with Boyds 1/2" Recoil Pad. ATTENTION CUSTOMERS: You will need your factory Floor Plate with attached Action Screws.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final!
    Price: 
    $102.05 $157.00
    Available: 
    1
    View Details
  • WIN 70 PRE-64 LONG ACTION 2...

    CLA WIN 70 PRE-64 LONG ACTION 2PC FLOOR PLATE FBC Claro XX Walnut Satin Finish Pachmayr Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 7/16" Over All Length of Part: N/A Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: These stocks are designed for the Winchester model 70 pre 64 long action, with a 2 piece floor plate, factory barrel. You will need your factory Trigger Guard, 2-Piece Hinged Floor Plate, 3 Action Screws, Machine Screw w/escutcheon(Forend Location) & Magazine Box. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. All Rapid Fire sales are final! Nonreturnable & nonrefundable.
    Price: 
    $312.65 $481.00
    Available: 
    1
    View Details
  • WEATHERBY MARK V LONG ACTIO...

    HERT WEATHERBY MARK V LONG ACTION 1-PC FLOOR PLATE FBC ClaroXX Walnut Satin Finish Boyds Pad Laser Panel Walnut Grip Cap Barrel Dimensions: Point A = 1.140" and Point B = 0.680"Center to Center of Action Screws: 8.105" Over All Length of Part: 32"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.ATTENTION CUSTOMERS:You will need the floorplate and action screws from your original stock. ATTENTION CUSTOMERS: These stocks are designed for rifles with a 6 lug bolt, and are not compatible with rifles with a 9 lug bolt system. All Rapid Fire sales are final! Nonrefundable & nonreturnable.
    Price: 
    $281.45 $433.00
    Available: 
    1